chore(2meet-data-optimizer): make the hardening branch pass PHPStan and PHPCS

- CI PHPStan (level 6, baseline for pre-existing debt) failed on 35 errors in
  code added on hardening/2.0: missing iterable value types (PHPDoc only), a
  redundant method_exists() in uninstall.php, and the new WP-CLI commands
  registered as array('Class', 'instanceMethod') — now array(new Class(), ...)
- Local runs had been masked by a PHPStan tmpDir shared with the act CI runner
  (cached container pointing at a removed phar); use a private tmpDir
- Verify: phpstan (private tmpDir) no errors, phpcs clean on changed files,
  phpunit Unit 658 OK; dev22 (running this branch) CLI post-status-sync /
  bridge-restore-native dry runs OK

.gitea/workflows/anti-eav-lint.yml

@@ -0,0 +1,61 @@
+name: Anti-EAV Lint + Quality Gate
+
+on:
+  push:
+    branches: [main, master, develop]
+  pull_request:
+    branches: [main, master]
+
+concurrency:
+  group: ${{ gitea.workflow }}-${{ gitea.ref }}
+  cancel-in-progress: true
+
+jobs:
+  anti-eav-lint:
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Composer install (no-dev)
+        run: |
+          if [ -f composer.json ]; then
+            composer install --no-dev --optimize-autoloader --no-interaction
+          fi
+
+      - name: PHP syntax lint
+        run: |
+          set -e
+          FAILED=$(find . -name '*.php' \
+            -not -path './vendor/*' \
+            -not -path './node_modules/*' \
+            -not -path './e2e/*' \
+            -not -path './tests/*' \
+            -exec php -l {} \; 2>&1 | grep -v 'No syntax errors' || true)
+          if [ -n "$FAILED" ]; then
+            echo "PHP syntax errors detected:"
+            echo "$FAILED"
+            exit 1
+          fi
+
+      - name: Anti-EAV strict lint
+        run: |
+          if ! command -v wp >/dev/null 2>&1; then
+            echo "wp-cli not available; skipping anti-eav lint"
+            exit 0
+          fi
+          # dev30 hosts the plugin family this repo belongs to.
+          TMDO_HOST="/var/www/Studio/wp-local-dev30"
+          if [ -d "$TMDO_HOST" ]; then
+            wp --path="$TMDO_HOST" tmdo lint --plugin="${GITHUB_WORKSPACE}" --strict
+          else
+            echo "TMDO_HOST not found; skipping anti-eav lint"
+          fi
+
+      # NOTE: no packaging audit here on purpose.
+      # The shared package-plugin.sh resolves the plugin by SLUG to a fixed path
+      # under wp-content/plugins — it does NOT package the CI checkout. Running it
+      # from a job therefore rebuilds (and `composer install --no-dev`s) the live
+      # working copy, wiping the developer's vendor/bin. Packaging belongs to the
+      # release workflow / a manual run, not to every push.

.gitea/workflows/release.yml

@@ -0,0 +1,87 @@
+name: Release
+
+on:
+  push:
+    tags:
+      - 'v*'
+
+jobs:
+  test-gate:
+    name: Test Gate (lint + phpcs + phpstan + unit + integration)
+    runs-on: ubuntu-latest
+    # Host-mode runner: no service containers. Uses the host MariaDB, same as
+    # the Tests workflow.
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install dependencies
+        run: composer install --no-interaction --prefer-dist
+
+      - name: PHP Lint
+        run: |
+          find . -name "*.php" \
+            ! -path "./vendor/*" \
+            ! -path "./tests/*" \
+            -print0 | xargs -0 -n1 php -l
+          echo "PHP syntax OK"
+
+      - name: PHPCS
+        run: vendor/bin/phpcs --standard=phpcs.xml --report=checkstyle -q .
+
+      - name: PHPStan
+        run: vendor/bin/phpstan analyse --no-progress --error-format=github
+
+      - name: Unit Tests
+        run: php vendor/bin/phpunit --configuration phpunit.xml --testdox
+
+      - name: Integration Tests
+        env:
+          TMDO_TEST_DB_HOST: 127.0.0.1
+          TMDO_TEST_DB_USER: dbo
+          TMDO_TEST_DB_PASS: ${{ secrets.TMDO_TEST_DB_PASS }}
+          TMDO_TEST_DB_NAME: wp_wpdo_test
+        run: php vendor/bin/phpunit --configuration phpunit-integration.xml --testdox
+
+  release:
+    needs: [test-gate]
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Build ZIP
+        run: bash scripts/ci-package.sh
+
+      - name: Create Gitea Release
+        env:
+          GITEA_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+          GITEA_URL: ${{ vars.RELEASE_GITEA_URL }}
+        run: |
+          set -euo pipefail
+          VERSION="${{ gitea.ref_name }}"
+          ZIP=$(ls dist/*.zip | head -1)
+          ZIP_NAME=$(basename "$ZIP")
+          MD5=$(md5sum "$ZIP" | awk '{print $1}')
+
+          # Create the release
+          RELEASE_ID=$(curl -s -X POST \
+            -H "Authorization: token ${GITEA_TOKEN}" \
+            -H "Content-Type: application/json" \
+            "${GITEA_URL}/api/v1/repos/${{ gitea.repository }}/releases" \
+            -d "{
+              \"tag_name\": \"${VERSION}\",
+              \"name\": \"${VERSION}\",
+              \"body\": \"MD5: \`${MD5}\`\",
+              \"draft\": false,
+              \"prerelease\": false
+            }" | grep -o '"id":[0-9]*' | head -1 | grep -o '[0-9]*')
+
+          # Upload ZIP asset
+          curl -s -X POST \
+            -H "Authorization: token ${GITEA_TOKEN}" \
+            -H "Content-Type: application/zip" \
+            "${GITEA_URL}/api/v1/repos/${{ gitea.repository }}/releases/${RELEASE_ID}/assets?name=${ZIP_NAME}" \
+            --data-binary "@${ZIP}"
+
+          echo "Released ${VERSION} — asset: ${ZIP_NAME} (MD5: ${MD5})"

.gitea/workflows/test.yml

@@ -0,0 +1,111 @@
+name: Tests
+
+on:
+  push:
+    branches: [ main, master, develop ]
+  pull_request:
+    branches: [ main, master, develop ]
+
+jobs:
+  unit:
+    name: Unit Tests
+    runs-on: ubuntu-latest
+    # Host-mode gitea runner (label `ubuntu-latest:host`) uses the host PHP
+    # toolchain (currently 8.3). `shivammathur/setup-php` cannot provision
+    # alternate PHP versions in host mode, so there is no 8.1/8.2/8.3 matrix.
+    # (Restore one if the runner ever moves to container mode.)
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install dependencies
+        run: composer install --no-interaction --prefer-dist
+
+      - name: Run unit tests
+        run: php vendor/bin/phpunit --configuration phpunit.xml --testdox
+
+  integration:
+    name: Integration Tests
+    runs-on: ubuntu-latest
+    # Host-mode runner: service containers are NOT started, so connect to the
+    # host MariaDB at 127.0.0.1:3306 directly. The password comes from the repo
+    # secret TMDO_TEST_DB_PASS (test DB `wp_wpdo_test` and user `dbo` already
+    # exist on the host). The bootstrap also accepts the legacy WPDO_TEST_DB_*
+    # names, so an existing secret of either name works.
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install dependencies
+        run: composer install --no-interaction --prefer-dist
+
+      # Preflight: a DB outage or a rotated secret would otherwise surface as an
+      # opaque PHPUnit bootstrap error. Fail fast with an INFRA-vs-test
+      # distinction so a red integration job is diagnosable.
+      - name: DB preflight (host MariaDB reachable?)
+        env:
+          TMDO_TEST_DB_HOST: 127.0.0.1
+          TMDO_TEST_DB_USER: dbo
+          TMDO_TEST_DB_PASS: ${{ secrets.TMDO_TEST_DB_PASS }}
+          TMDO_TEST_DB_NAME: wp_wpdo_test
+        run: |
+          php -r '
+            mysqli_report(MYSQLI_REPORT_OFF);
+            $c = @mysqli_connect(getenv("TMDO_TEST_DB_HOST"), getenv("TMDO_TEST_DB_USER"), getenv("TMDO_TEST_DB_PASS"), getenv("TMDO_TEST_DB_NAME"), 3306);
+            if (!$c) {
+                fwrite(STDERR, "::error::Integration DB unreachable at " . getenv("TMDO_TEST_DB_HOST") . ":3306 db=" . getenv("TMDO_TEST_DB_NAME") . " user=" . getenv("TMDO_TEST_DB_USER") . " — host MariaDB down or TMDO_TEST_DB_PASS secret stale/rotated. This is an INFRA failure, not a test failure: " . mysqli_connect_error() . "\n");
+                exit(1);
+            }
+            echo "DB preflight OK: connected to " . getenv("TMDO_TEST_DB_NAME") . " on " . getenv("TMDO_TEST_DB_HOST") . "\n";
+          '
+
+      - name: Run integration tests
+        env:
+          TMDO_TEST_DB_HOST: 127.0.0.1
+          TMDO_TEST_DB_USER: dbo
+          TMDO_TEST_DB_PASS: ${{ secrets.TMDO_TEST_DB_PASS }}
+          TMDO_TEST_DB_NAME: wp_wpdo_test
+        run: php vendor/bin/phpunit --configuration phpunit-integration.xml --testdox
+
+  lint:
+    name: PHP Lint
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Check PHP syntax
+        run: |
+          find . -name "*.php" \
+            ! -path "./vendor/*" \
+            ! -path "./tests/*" \
+            -print0 | xargs -0 -n1 php -l
+          echo "PHP syntax OK"
+
+  phpcs:
+    name: PHPCS
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install dependencies
+        run: composer install --no-interaction --prefer-dist
+
+      - name: Run PHPCS
+        run: vendor/bin/phpcs --standard=phpcs.xml --report=checkstyle -q .
+
+  phpstan:
+    name: PHPStan
+    runs-on: ubuntu-latest
+    # A never ran static analysis in CI; the baseline is committed, so new code
+    # is checked at level 6 while existing debt stays silent.
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install dependencies
+        run: composer install --no-interaction --prefer-dist
+
+      - name: Run PHPStan (level 6, baselined)
+        run: vendor/bin/phpstan analyse --no-progress --error-format=github

.gitignore

@@ -14,3 +14,4 @@ Thumbs.db
 .playwright-mcp/
 .claude/
 dist/
+.phpcs-cache

.phpstan/stubs.php

@@ -0,0 +1,34 @@
+<?php
+/**
+ * PHPStan bootstrap stubs — plugin constants defined at runtime.
+ *
+ * PHPStan cannot see define()'d constants, so it reports "undefined constant"
+ * for every one of them. Stubbing them here keeps level 6 signal-to-noise high.
+ *
+ * TMDO_IS_SQLITE / TMDO_IS_MYSQL (and their WPDO_ aliases) are intentionally
+ * NOT stubbed to avoid literal-narrowing "always true/false" false positives
+ * on runtime-dynamic values.
+ *
+ * @package TMDO
+ */
+
+declare(strict_types=1);
+
+define( 'TMDO_VERSION', '0.0.0' );
+define( 'TMDO_DB_VERSION', '0.0.0' );
+define( 'TMDO_PATH', '/' );
+define( 'TMDO_URL', 'https://example.test/wp-content/plugins/2meet-data-optimizer/' );
+define( 'TMDO_FILE', '/2meet-data-optimizer.php' );
+define( 'TMDO_TABLE_PREFIX', 'wpdo_' );
+define( 'TMDO_CACHE_GROUP', 'wpdo' );
+define( 'TMDO_MIN_PHP', '8.1' );
+define( 'TMDO_MIN_WP', '6.0' );
+
+// Back-compat aliases exposed by class-tmdo-back-compat.php.
+define( 'WPDO_VERSION', '0.0.0' );
+define( 'WPDO_DB_VERSION', '0.0.0' );
+define( 'WPDO_PLUGIN_DIR', '/' );
+define( 'WPDO_PLUGIN_URL', 'https://example.test/wp-content/plugins/2meet-data-optimizer/' );
+define( 'WPDO_PLUGIN_FILE', '/2meet-data-optimizer.php' );
+define( 'WPDO_TABLE_PREFIX', 'wpdo_' );
+define( 'WPDO_CACHE_GROUP', 'wpdo' );

2meet-data-optimizer.php

@@ -3,7 +3,7 @@
  * Plugin Name:       2meet Data Optimizer
  * Plugin URI:        https://2meet.io/2meet-data-optimizer
  * Description:       通用 WordPress 反 EAV 引擎：將 postmeta / usermeta / termmeta / commentmeta 自動分流至四象限扁平表（Hot / Warm / Cold / Archive），大幅提升搜尋與篩選效能。從 wp-data-optimizer v2.16.0 提煉的純核心，整合層交給 11 個 AddOn。
- * Version:           0.1.0
+ * Version:           1.0.2
  * Requires at least: 6.0
  * Tested up to:      6.9.4
  * Requires PHP:      8.1
@@ -19,12 +19,14 @@
  * @package TMDO
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
 
 // ── Constants ──────────────────────────────────────────────────────────────
-define( 'TMDO_VERSION', '0.1.0' );
+define( 'TMDO_VERSION', '1.0.2' );
 define( 'TMDO_DB_VERSION', '2.1.0' );
 define( 'TMDO_PATH', plugin_dir_path( __FILE__ ) );
 define( 'TMDO_URL', plugin_dir_url( __FILE__ ) );
@@ -50,12 +52,12 @@ define(
 define( 'TMDO_IS_MYSQL', ! TMDO_IS_SQLITE );
 
 // ── 跨外掛偵測訊號（dual-fire 對外保留 wp-data-optimizer 訊號）────────────
-const TWO_MEET_DATA_OPTIMIZER_VERSION    = '0.1.0';
+const TWO_MEET_DATA_OPTIMIZER_VERSION    = '1.0.0';
 const TWO_MEET_DATA_OPTIMIZER_FILE       = __FILE__;
 const TWO_MEET_DATA_OPTIMIZER_DB_VERSION = '1.2.0';
 // 向後相容：對外 sister plugins 仍以 WP_DATA_OPTIMIZER_VERSION 偵測。
 if ( ! defined( 'WP_DATA_OPTIMIZER_VERSION' ) ) {
-	define( 'WP_DATA_OPTIMIZER_VERSION', '0.1.0' );
+	define( 'WP_DATA_OPTIMIZER_VERSION', '1.0.0' );
 }
 if ( ! defined( 'WP_DATA_OPTIMIZER_FILE' ) ) {
 	define( 'WP_DATA_OPTIMIZER_FILE', __FILE__ );
@@ -86,7 +88,11 @@ if ( version_compare( PHP_VERSION, TMDO_MIN_PHP, '<' ) ) {
 add_action(
 	'admin_notices',
 	static function () {
-		if ( defined( 'WPDO_VERSION' ) && WPDO_VERSION !== TMDO_VERSION ) {
+		// Deliberately not a WPDO_VERSION comparison: this plugin defines that
+		// constant itself (includes/class-tmdo-back-compat.php), so the two
+		// would always match and the notice could never fire.
+		$tmdo_legacy = 'wp-data-optimizer/wp-data-optimizer.php';
+		if ( in_array( $tmdo_legacy, (array) get_option( 'active_plugins', array() ), true ) ) {
 			echo '<div class="notice notice-error"><p>';
 			esc_html_e( '⚠ 偵測到舊版 wp-data-optimizer 已啟用。請停用舊外掛以避免 hook 雙觸發。', '2meet-data-optimizer' );
 			echo '</p></div>';
@@ -252,6 +258,8 @@ require_once TMDO_PATH . 'includes/migration/phases/class-tmdo-phase-cleanup.php
 require_once TMDO_PATH . 'includes/migration/phases/class-tmdo-phase-completed.php';
 require_once TMDO_PATH . 'includes/migration/class-tmdo-migration-orchestrator.php';
 require_once TMDO_PATH . 'includes/migration/class-tmdo-post-migration.php';
+require_once TMDO_PATH . 'includes/migration/class-tmdo-post-group-reconciler.php';
+require_once TMDO_PATH . 'includes/migration/class-tmdo-native-restorer.php';
 add_action( TMDO_Migration_Orchestrator::CRON_HOOK, array( 'TMDO_Migration_Orchestrator', 'cron_tick' ) );
 add_action( 'wpdo_bridge_mode_changed', array( 'TMDO_Migration_Orchestrator', 'bust_attention_cache' ) );
 add_action( 'tmdo_bridge_mode_changed', array( 'TMDO_Migration_Orchestrator', 'bust_attention_cache' ) );
@@ -260,6 +268,7 @@ require_once TMDO_PATH . 'includes/class-tmdo-post-stress-tester.php';
 require_once TMDO_PATH . 'includes/class-tmdo-post-shadow-verifier.php';
 require_once TMDO_PATH . 'includes/engine/class-tmdo-auto-promoter.php';
 require_once TMDO_PATH . 'includes/engine/class-tmdo-hook-bus.php';
+require_once TMDO_PATH . 'includes/engine/class-tmdo-post-status-sync.php';
 require_once TMDO_PATH . 'includes/adapters/interface-entity-adapter.php';
 require_once TMDO_PATH . 'includes/adapters/class-tmdo-adapter-post.php';
 require_once TMDO_PATH . 'includes/adapters/class-tmdo-adapter-user.php';
@@ -279,6 +288,10 @@ if ( is_admin() ) {
 	TMDO_Setup_Wizard::register();
 	require_once TMDO_PATH . 'admin/class-tmdo-dashboard-widget.php';
 	TMDO_Dashboard_Widget::register();
+	require_once TMDO_PATH . 'admin/class-tmdo-deprecated-addons-notice.php';
+	TMDO_Deprecated_Addons_Notice::register();
+	require_once TMDO_PATH . 'admin/class-tmdo-missing-addons-notice.php';
+	TMDO_Missing_Addons_Notice::register();
 }
 
 // ── WP-CLI ─────────────────────────────────────────────────────────────────

CHANGELOG.md

@@ -7,6 +7,160 @@ Versioning follows [Semantic Versioning](https://semver.org/).
 
 ---
 
+## [1.0.2] — 2026-08-15 — NinjaFirewall 相容性：WAF 設定選項保護
+
+**性質**：防禦性修正 + 文件。無 schema 變更，無破壞性變更。
+
+### Added
+
+- **`docs/WAF-COMPATIBILITY.md`** — NinjaFirewall (WP Edition) 4.9 相容性評估
+
+  結論：兩者可共存，**不需要開發 AddOn**（NinjaFirewall 全 codebase 零個
+  `apply_filters('nfw_*')` / `do_action('nfw_*')`，官方相容手段全在部署層）。
+  文件涵蓋 WP WAF 與 Full WAF 的模式差異、symlink 多租戶部署的必要設定、
+  三條開發約束，以及實測風險矩陣。
+
+- **`TMDO_Options_Manager::PROTECTED_OPTIONS`** 常數與註冊守衛
+  （`modules/options/class-tmdo-options-manager.php`）
+
+  `register_settings_group()` 會以 `pre_update_option_{key}` 回傳 `$old_value`，
+  讓選項不再落地 `wp_options`、改存專屬設定表。但 NinjaFirewall 的 Full WAF 走
+  `auto_prepend_file`，在 WordPress 載入前就以**原生 mysqli 直查 `wp_options`**
+  取 `nfw_options` / `nfw_rules`。一旦這些鍵被重導向，WAF 會讀不到設定而
+  **靜默停止防護 —— 不報錯、不寫 log**。
+
+  現以 `PROTECTED_OPTIONS`（`nfw_options` / `nfw_rules` / `nfw_checked`）在註冊
+  階段擋下，並發出 `_doing_it_wrong()`。守衛置於方法開頭，全部鍵都被擋時提前
+  返回，不再建立空的設定表。
+
+  註：autoload 最佳化不受影響 —— `optimize_autoload()` 只改 `autoload` 欄位、
+  不刪列，而該處的 `SELECT *` 不看 autoload。
+
+- **`tests/unit/OptionsManagerProtectedTest.php`** — 4 tests / 10 assertions
+
+  鎖住「受保護鍵絕不會被掛上 `pre_option_*` / `pre_update_option_*` 攔截」這個
+  核心保證，並驗證全數受保護時不對資料庫發出查詢。
+
+### Changed
+
+- **Migration Wizard 輪詢間隔 500ms → 2s**（`admin/assets/wpdo-migration-wizard.js`）
+
+  原本 2 req/s 打同一個 REST endpoint，容易觸發 WAF 的 rate-limit 與 bot 偵測。
+  改為 2 秒，與四個 stress-test 面板既有的輪詢節奏一致。
+
+---
+
+## [1.0.1] — 2026-08-08 — Schema Registry 冪等性修正（cold zone 欄位重複累積）
+
+**性質**：核心 bug 修復。無 schema 變更，無 API 變更，無破壞性變更。
+
+### Fixed
+
+- **`TMDO_Schema_Registry::register()` 的 cold zone 分支會無限累積重複項**
+  （`includes/class-tmdo-schema-registry.php`）
+
+  三個 zone 索引的寫入方式並不一致：
+  - `hot` → `$this->hot_columns[$post_type][$column] = ...`（以 column 為 key，天生冪等）
+  - `warm` → `$this->warm_fields[$meta_key] = ...`（以 meta_key 為 key，天生冪等）
+  - `cold` → `$this->cold_fields[$post_type][] = ...`（**append，無去重**）
+
+  而 `wpdo_register_fields` 本來就會被觸發多次——核心自身在 `plugins_loaded:4` 觸發，
+  主檔另有 late-bind safety net 於 `plugins_loaded:30` 再次觸發，好讓在 `:6` 之後才
+  bootstrap 的 AddOn 也能趕上；再加上主外掛與其 AddOn 可能同時註冊同一批欄位。
+
+  **實測影響**：某站台 `cold_fields['hp_vendor']` 累積到 **35 筆但只有 9 個相異值**，
+  每個 key 重複 4 次。修正後為 9 筆、零重複。
+
+  修法：cold 分支加入 `in_array( ..., true )` 去重，使 `register()` 對同一
+  `(post_type, meta_key)` 成為冪等操作，與 hot / warm 的既有行為一致。
+
+### 驗證
+
+- 核心單元測試 **587 tests / 1156 assertions** 全綠
+- `wp wpdo doctor` 於兩個站台皆 0 FAIL
+- Version bump 1.0.0 → 1.0.1（2 點一致：header / `TMDO_VERSION`）
+
+---
+
+## [1.0.0] — 2026-07-31 — 取代 wp-data-optimizer v3.4.6
+
+本版把 `wp-data-optimizer` v3.0.1–v3.4.6（92 個 commit）全數 backport 進來，
+`wp-data-optimizer` 自此退休：兩個站台皆已停用它，本機目錄改名為
+`wp-data-optimizer.retired`，其 git 歷史保留在 gitea。
+
+### 🔒 Security / 正確性
+
+- **7 處 `Logger::error()` 參數不足**（array 傳給 string `$hook`）修正 —— 4 個 stress
+  tester、auto-promoter、conflict-detector、hook-bus，皆為 TypeError fatal
+- **`Logger::trace_id()` 補回**：`Audit_Logger::write_row()` 一直呼叫它，但提煉時漏了；
+  `Audit_Logger::init()` 從未註冊所以隱藏至今 —— 實機驗證才暴露
+- REST 4 個公開端點加上 `show_in_rest` 欄位 allowlist（CVSS 5.3）
+- 13 個破壞性 admin 動作由 GET 改 POST + nonce
+- DDL 型別白名單（19 型別）、CLI 表名守衛
+- 整欄清空改 `wpdo_allow_mass_column_clear` opt-in（原本 >500 列才擋）
+- audit 表補 `group_name` / `action` 欄並註冊 `Audit_Logger::init()`
+- `known_login_ips` 註冊（spoke-sso 實際寫入的欄位，先前落 `wp_usermeta`）
+
+### ⚡ 並發
+
+- warm 表 `UNIQUE KEY ui_post_meta`（缺它 `ON DUPLICATE KEY UPDATE` 不生效）
+- Zone_Cold 改 `JSON_MERGE_PATCH` / `JSON_REMOVE`、Zone_Warm 原子 `increment()`、
+  hook-bus `write_to_flat` 改 upsert
+
+### 🏗 架構
+
+- 回填 `TMDO_Zone_Router` + `TMDO_Routing_Predicate`（Sync_Bridge 400→269 行）
+- 回填 Migration Phase Strategy：interface + base + 11 個 phase 類別，
+  orchestrator 1107→640 行，公開介面不變
+- 核心新增 `TMDO_Standard_Post_Interceptor`，HP AddOn 4 個 interceptor 573→344 行
+
+### 🔌 相容性
+
+- hook 橋改**雙向**：核心一律 `do_action('wpdo_*')`，原本單向轉發使所有
+  `tmdo_*` 契約收不到事件
+- 57 個 AddOn 類別補 `WPDO_*` alias（核心 alias 表在 `plugins_loaded:4` 執行，
+  涵蓋不到 `:6` 才載入的 AddOn）
+- 38 個 CLI 子指令補 `wp tmdo` 命名空間
+- 選單 slug 統一回 `wp-data-optimizer`（B 內部 10+ 處連結本來就指向它）
+- HP adapter 介面改為 `TMDO_ extends WPDO_`，讓 `instanceof WPDO_HivePress_Adapter` 成立
+
+### 🖥 Admin
+
+- Settings 七個分區各加「儲存此區塊」AJAX 存檔（`wp_ajax_wpdo_save_settings_section`
+  + 7 個 `save_section_*()` + `admin/assets/wpdo-settings.js`），整頁送出仍可用
+- inline `style=` 由 348 處降到 9 處（剩下的全是 `--wpdo-*` CSS custom property
+  載體）；`wpdo-admin.css` 543 → 912 行，補 149 個 class
+
+### 🚧 邊界
+
+- 核心不再無守衛呼叫 AddOn 類別。`TMDO_Listing_Stats`（HivePress AddOn）先前
+  在 admin Dashboard、兩個公開 REST 端點、`wp tmdo cleanup --archive-expired`
+  被直呼，沒裝該 AddOn 的站台會 fatal；`TMDO_HPCT_Import` 在 admin 與
+  `wp tmdo import-hpct` 同樣缺守衛
+- `TMDO_Zone_Warm::VIEW_KEY` / `VIEW_TTL` 由核心持有（值與 AddOn 常數相同的
+  `'wpdo_views'`，指向同一批列，無資料遷移）
+- 新增 `CoreBoundaryTest`：靜態掃描 126 個核心生產檔，強制每處 AddOn 類別
+  呼叫都在同一函式內有 `class_exists()` 守衛
+
+### ✅ 品質
+
+- 128 個生產檔 `declare(strict_types=1)`
+- PHPCS 0 errors / PHPStan level 6（baseline 710）
+- 測試：核心 unit 587 / integration 416、hivepress-addon unit 154 /
+  integration 57、woocommerce-addon unit 10 / integration 18
+- gitea CI：核心 6 個 job 全綠 + 11 個 AddOn workflow + branch protection
+- 打包 10 項終檢全 PASS（569 KB / 187 entries，schema drift 0：34 CREATE / 34 DROP）
+
+### ⚠️ ABI / 行為變更
+
+- `doctor_callback` 由 3 參數改為 1 參數（表名）
+- `wpdo_capture_before_value` 預設 `true` → `false`；需要 `value_before` 的
+  消費者（audit log）要 `add_filter( 'wpdo_capture_before_value', '__return_true' )`
+- `wpdo_allow_mass_column_clear` 現為 opt-in，整欄清空預設被拒
+- `SCHEMA_VERSION` 2.0.0 → 2.1.0（audit 表 ALTER）
+
+---
+
 ## [0.1.0] — 2026-05-15 (initial release, Phase 0-5 完成)
 
 ### Phase 5 hotfix（同日完成）

CONTEXT.md

@@ -0,0 +1,324 @@
+# CONTEXT.md — 2meet Data Optimizer Domain Glossary
+
+This file defines the canonical vocabulary for 2meet Data Optimizer.
+Architecture reviews, AI assistance, and code documentation must use these terms exactly.
+
+> **Status (2026-07-31, v1.0.0):** 核心 451 unit / 416 integration · hivepress-addon 145 unit / 57 integration · woocommerce-addon 10 unit / 18 integration · PHPCS 0 errors · PHPStan L6（baseline 710）· gitea CI 6 job 全綠。
+> v1.0.0 取代 `wp-data-optimizer` v3.4.6，該外掛已退休（本機目錄改名 `.retired`，git 歷史留在 gitea）。版號自 1.0.0 重啟。
+> **本外掛只有通用引擎**：4 entity（post / user / term / comment）反 EAV、zone 表、migration、wizard、admin、CLI、REST、snapshot、diagnostic、notifications。HivePress / WooCommerce / LatePoint / 2meet-* 整合層全部在 11 個獨立 AddOn，核心不得引用它們的類別。
+> **共用命名空間刻意保留**：`wp_wpdo_*` 表、`wpdo_` option / cron / hook 前綴、`wpdo/v1` REST namespace 一律不改名 —— 這是資料層零遷移的前提。類別與函式前綴才是 `TMDO_` / `tmdo_`，並以 `class_alias()` 對外保留 `WPDO_*`。
+> HivePress addon detection uses the **WP active-plugins list** as the authoritative signal (addons publish no per-addon class/const; they register via `add_filter('hivepress/v1/extensions', …)`). See `TMDO_HivePress_Detector::detect()` / `active_plugin_files()` in the HivePress AddOn.
+> **測試 harness 隔離**：`TMDO_FSM_GUARD_DISABLED`（integration bootstrap，讓測試可強制 module state）、`TMDO_Routing_Predicate::flush_cache()`、`TMDO_Schema_Manager::flush_table_exists_cache()` 三者是跨測試污染的解法，**不是** production 缺陷的補丁。
+> **gitea runner 為 wpdev 全 repo 共享**（host-mode label `ubuntu-latest:host`，無 service container，integration job 直接連本機 MariaDB）。CI 卡 pending 時先查 `GET /api/v1/user/actions/runners`。
+
+---
+
+## Zone
+
+A dedicated storage tier for WordPress postmeta, optimised for a specific access pattern.
+
+| Zone | Slug | Table pattern | Purpose |
+|------|------|---------------|---------|
+| Hot  | `hot` | `wpdo_hot_{post_type}` | Flat columns for search/filter (index-friendly) |
+| Warm | `warm` | `wpdo_warm` | TTL key-value store for counts and transient flags |
+| Cold | `cold` | `wpdo_cold_{post_type}` | JSON blob for display-only fields |
+| Archive | `archive` | `wpdo_archive` | gzip-compressed historical data |
+
+A post type's fields are assigned to exactly one zone via the **Schema Registry**.
+
+---
+
+## Schema Registry
+
+`TMDO_Schema_Registry` — singleton that maps `(post_type, meta_key) → field definition`.
+
+A **field definition** carries `zone`, `column` (flat name), and optional `type`.
+The registry is populated at `wpdo_register_fields` action by integrations and adapters.
+
+---
+
+## Zone Router
+
+`TMDO_Zone_Router` — static dispatch layer introduced in v3.0.1.
+
+Single module that knows how to route `read`, `write`, and `delete_field` to the correct
+zone handler (Hot / Warm / Cold / Archive) given a field definition.
+Also produces canonical **module names** for Feature Flag lookups.
+
+> **Why it exists**: before v3.0.1, routing logic was duplicated across `TMDO_Sync_Bridge`,
+> `TMDO_REST_API`, and two query files.  Extracting it here creates one seam for tests and
+> one place to change zone routing decisions.
+
+Interface (all static):
+```
+TMDO_Zone_Router::module_name(zone, post_type) → string
+TMDO_Zone_Router::read(field, post_id, post_type, meta_key) → mixed
+TMDO_Zone_Router::write(field, post_id, post_type, meta_key, value) → void
+TMDO_Zone_Router::delete_field(field, post_id, post_type, meta_key) → void
+TMDO_Zone_Router::delete_post(post_id, post_type) → void   # v3.4.0: all-zone post cleanup
+```
+
+---
+
+## Routing Predicate
+
+`TMDO_Routing_Predicate` — centralised predicate module introduced in v3.4.0.
+
+Two recurring guard patterns previously scattered across `TMDO_Sync_Bridge`,
+`TMDO_Query_Router`, and the REST API are now a single module:
+
+```
+TMDO_Routing_Predicate::entity_bridge_owns(meta_key) → bool
+TMDO_Routing_Predicate::should_write_to_zone(post_type, zone) → bool
+TMDO_Routing_Predicate::should_read_from_zone(post_type, zone) → bool
+TMDO_Routing_Predicate::should_query_from_zone(post_type, zone) → bool
+TMDO_Routing_Predicate::flush_cache() → void   # test isolation helper
+```
+
+`entity_bridge_owns()` returns true when `TMDO_Mode_Manager::writes_to_flat('post')` AND
+the key is registered in `TMDO_Entity_Registry` for 'post'.  Result is memoised in a
+request-level static cache (`$entity_bridge_cache`) keyed by `meta_key`.
+
+The three `should_*` predicates are thin compositions of
+`TMDO_Zone_Router::module_name()` + the matching `TMDO_Feature_Flags::is_*()` method.
+
+> **Why it exists**: without this module, callers re-implemented the same two-step
+> "module_name then Feature_Flags" pattern inline.  The **deletion test** confirms depth:
+> removing it pushes the repeated guard back into 8+ call sites in Sync_Bridge alone.
+
+---
+
+## Sync Bridge
+
+`TMDO_Sync_Bridge` — zone-aware dual-write dispatcher hooked into the WordPress metadata API.
+
+Intercepts `get/update/add/delete_post_metadata` and `before_delete_post`.
+Calls `TMDO_Zone_Router::read/write/delete_field/delete_post` directly — no private
+I/O wrappers (v3.4.1: delegate methods inlined and removed).
+Uses the **Routing Predicate** for all ownership and activation checks.
+
+The bridge skips fields owned by the **Entity Bridge** to avoid duplicate writes.
+
+Its only private helper is `get_field_cached()` — a request-level Schema Registry
+lookup cache keyed by `post_type:meta_key`.
+
+---
+
+## Module
+
+A named unit whose lifecycle is tracked by the **Feature Flags** 7-state machine.
+Module names follow the convention: `hot_{post_type}`, `cold_{post_type}`, `warm`, `archive`.
+
+`TMDO_Zone_Router::module_name()` is the single authoritative source for this naming.
+
+---
+
+## Feature Flags / 7-state FSM
+
+`TMDO_Feature_Flags` — state machine governing migration lifecycle for each module.
+
+States: `idle → dual_write → backfill → verify → cutover → cleanup → complete`
+
+`is_write_active(module)` returns true for `dual_write` and above.
+`is_read_custom(module)` returns true for `cutover` and above.
+
+---
+
+## Entity Bridge
+
+Newer anti-EAV system (v2.5+) covering user, term, comment, and post entities via a
+**Hook Bus** that intercepts native `*meta()` API calls and writes to flat entity tables.
+
+`TMDO_Mode_Manager` controls per-entity mode: `disabled → dual_write → shadow_read → aeav_only`.
+`TMDO_Entity_Registry` maps `(entity_type, group) → fields`.
+
+The Entity Bridge and the Zone system coexist; the Sync Bridge's
+`is_owned_by_entity_bridge()` guard prevents duplicate writes.
+
+---
+
+## Migration Phase (Strategy pattern)
+
+Interface: `TMDO_Migration_Phase_Interface` (v3.0.1).
+
+Each phase encapsulates a single step of the Entity Bridge migration pipeline:
+
+| Phase class | Slug | What it does |
+|-------------|------|--------------|
+| `TMDO_Phase_Diagnose` | `diagnose` | Records preflight EAV row count / ratio |
+| `TMDO_Phase_Backup` | `backup` | Dumps native meta table to `uploads/wpdo-backups/` |
+| `TMDO_Phase_Demote` | `demote` | aeav_only → dual_write (rollback entry point) |
+| `TMDO_Phase_Install_Schema` | `install_schema` | Creates flat tables via Schema Manager |
+| `TMDO_Phase_Backfill_Bulk` | `backfill_bulk` | Pivots text-only groups via INSERT…SELECT |
+| `TMDO_Phase_Backfill_Unserialize` | `backfill_unserialize` | Row-by-row migration for JSON fields |
+| `TMDO_Phase_Promote_Shadow` | `promote_shadow` | dual_write → shadow_read |
+| `TMDO_Phase_Verify_Sample` | `verify_sample` | Samples entities, compares flat vs EAV |
+| `TMDO_Phase_Promote_Aeav` | `promote_aeav` | shadow_read → aeav_only |
+| `TMDO_Phase_Cleanup` | `cleanup` | Deletes managed keys from EAV table |
+| `TMDO_Phase_Completed` | `completed` | Terminal — marks job done, returns `'done'` |
+
+`TMDO_Migration_Phase_Base` provides shared helpers (`log()`, `get_managed_keys()`,
+`execute_bulk_pivot()`, `values_loose_equal()`).
+
+The **Migration Orchestrator** (`TMDO_Migration_Orchestrator`) injects phase objects and
+calls `execute($job)` in sequence, advancing through the pipeline.
+
+> **Seam**: the interface is the test surface.  A phase can be tested by constructing it
+> with a stub entity type, calling `execute()` with a job array, and asserting on the
+> job's `state`, `log`, and `metrics` — no hooks or DB needed for unit tests.
+
+---
+
+## Standard Post Interceptor (Template Method pattern)
+
+`TMDO_Standard_Post_Interceptor` — abstract base (v3.0.1) for HPCT-inherited interceptors.
+
+Eliminates the three hook methods (`filter_update_meta`, `action_insert_post`,
+`action_delete_post`) that were previously duplicated across four interceptor classes.
+Subclasses declare only:
+
+```php
+public const FIELD_MAP = ['meta_key' => 'flat_column', ...];
+protected function get_post_type(): string { ... }
+protected function get_table_key(): string { ... }
+protected function build_insert_data(int $post_id, WP_Post $post, string $now): array { ... }
+```
+
+Concrete subclasses: `TMDO_Reviews_Interceptor`, `TMDO_Messages_Interceptor`,
+`TMDO_Memberships_Interceptor`, `TMDO_Requests_Interceptor`.
+
+---
+
+## External Partners
+
+`TMDO_Core::EXTERNAL_PARTNERS` (v3.0.1) — PHP class-name constant array listing all
+external plugin integrations that self-register via the Hook Bus.
+
+```php
+['TMDO_Infocards', 'TMDO_Bookings', 'TMDO_Quotation',
+ 'TMDO_Mobile_Bridge', 'TMDO_Collab', 'TMDO_Playlist']
+```
+
+Used in the late-bind priority-30 closure in `2meet-data-optimizer.php` to initialize
+partner integrations only when their plugin class is present.  Single source of truth —
+previously the list existed only inside the closure and diverged from `TMDO_Core`.
+
+---
+
+## HPCT Interceptors Manifest
+
+> **v1.0.0：本節描述的是 AddOn 的內部結構，核心已無此常數。**
+> `HPCT_INTERCEPTORS` 與 `register_hpct_interceptors()` 隨整合層一起搬到
+> `2meet-data-optimizer-hivepress-addon` 的 bootstrap；核心刻意不保留，否則會引用
+> 8 個核心不存在的類別名。下表列的 interceptor ↔ query-handler 配對關係仍然成立。
+
+`TMDO_Core::HPCT_INTERCEPTORS` (v3.4.0) — PHP class-constant array that is the single
+authoritative list of HPCT-inherited interceptor → query-handler pairs:
+
+```php
+TMDO_Reviews_Interceptor::class      → TMDO_Reviews_Query::class
+TMDO_Messages_Interceptor::class     → TMDO_Messages_Query::class
+TMDO_Favorites_Interceptor::class    → null
+TMDO_Memberships_Interceptor::class  → TMDO_Memberships_Query::class
+TMDO_Statistics_Interceptor::class   → null
+TMDO_Requests_Interceptor::class     → TMDO_Requests_Query::class
+TMDO_Listing_Meta_Interceptor::class → TMDO_Listing_Meta_Query::class
+TMDO_LatePoint_Interceptor::class    → null
+```
+
+`register_hpct_interceptors()` iterates this constant; adding a new interceptor requires
+only one entry here — no code change in the registration method.
+
+---
+
+## HPCT (HP Custom Tables)
+
+The plugin this replaces.  Still referenced in import path (`wp tmdo import-hpct`).
+Any "HPCT-inherited" interceptor means it originated in HPCT and was migrated here.
+
+---
+
+## Adapter (HivePress)
+
+> **v1.0.0：這 13 個 adapter 住在 `2meet-data-optimizer-hivepress-addon`，不在核心。**
+> 核心只提供 `TMDO_Schema_Registry` 與 `wpdo_register_fields` 這個 seam。
+
+Each HivePress addon (core, bookings, events, …) has a corresponding
+`TMDO_Hivepress_*_Adapter` that registers its meta keys into the Schema Registry at
+`wpdo_register_fields`.  The adapter is the seam between HivePress and the zone system.
+
+---
+
+## Anti-EAV
+
+The overarching goal: eliminate Entity-Attribute-Value (EAV) reads from `wp_postmeta`,
+`wp_usermeta`, etc. by moving data to flat tables.
+
+Compliance is enforced by `wpdo-policy-enforcer.php` (mu-plugin) and the
+`wp tmdo lint` CLI gate.
+
+---
+
+## Entity Group
+
+A named set of fields registered under one entity type (user / post / term / comment),
+stored as one flat table: `wp_wpdo_{entity_type}_{group_name}`.
+
+Each group has **one row per entity** (keyed on `user_id` / `post_id` / etc.).
+Fields within the group become typed columns; `sanitize_column_name()` produces the
+column name (strips all non-`[a-zA-Z0-9_]` characters — hyphens are removed, not replaced).
+
+Group registration: `TMDO_Entity_Registry::register_group(entity_type, group_name, fields[])`.
+
+Canonical user groups (v3.1.4):
+
+| Group | Table | Purpose |
+|-------|-------|---------|
+| `membership` | `wp_wpdo_user_membership` | Tier, points, expiry |
+| `activity` | `wp_wpdo_user_activity` | Login counters, last-active |
+| `profile` | `wp_wpdo_user_profile` | Bio, avatar, display name |
+| `sso` | `wp_wpdo_user_sso` | Hub token cache, SLO hash |
+| `core_profile` | `wp_wpdo_user_core_profile` | WP first_name, last_name, nickname, description |
+| `social` | `wp_wpdo_user_social` | 15 social platform URLs |
+| `commerce` | `wp_wpdo_user_commerce` | WC billing/shipping + runtime stats (wc_last_active, wc_order_count_wp, last_update) |
+| `hp_user` | `wp_wpdo_user_hp_user` | HP favorites, avatar, hp_verified |
+| `admin_prefs` | `wp_wpdo_user_admin_prefs` | WP default admin-UI keys written by wp_insert_user + extended UI prefs (22 keys total, v3.1.4) |
+
+---
+
+## EAV Floor
+
+The minimum irreducible rows that must remain in the native meta table even after full
+Entity Bridge migration to `aeav_only`.
+
+For `wp_usermeta`, the floor consists of:
+
+| Key | Rows per user | Why irreducible |
+|-----|---------------|-----------------|
+| `wp_capabilities` | 1 | WP core reads directly in `WP_User` constructor (not through `get_user_meta`) |
+| `session_tokens` | 0–N | WP authentication reads sessions directly; Hook Bus cannot intercept session creation safely |
+| `_application_passwords` | 0–1 | WP reads directly during REST auth |
+
+**Theoretical minimum ratio** for a standard WordPress site: `(users + sessions + app_passwords) / users ≈ 1:1.07` (varies by active sessions).
+
+Any ratio above 1:1.07 represents reducible EAV that WPDO can absorb.
+
+---
+
+## WP Admin Prefs
+
+The set of `wp_usermeta` keys that WordPress core writes automatically:
+
+**Written by `wp_insert_user()` for every new user (7 keys)**:
+`rich_editing`, `syntax_highlighting`, `comment_shortcuts`, `admin_color`, `use_ssl`,
+`show_admin_bar_front`, `dismissed_wp_pointers`
+
+**Written on first admin-page visit or explicit user action (extended, registered v3.1.4)**:
+`show_welcome_panel`, `wp_persisted_preferences`, `nav_menu_recently_edited`,
+`wp_dashboard_quick_press_last_post_id`, `edit_*_per_page` variants,
+`community-events-location`, `wp_user-settings`, `wp_user-settings-time`,
+`managenav-menuscolumnshidden`, `metaboxhidden_nav-menus`,
+`dismissed_no_secure_connection_notice`, `meta-box-order_product`
+
+All 22 keys are registered in the `admin_prefs` Entity Group and routed to
+`wp_wpdo_user_admin_prefs` by the Hook Bus when user entity mode ≥ `dual_write`.

PLAN.md

@@ -6,7 +6,7 @@
 
 ## Current state
 
-- **Version**: 0.1.0 (scaffold + 4 phase 完成 2026-05-15)
+- **Version**: 1.0.2 (2026-08-15；scaffold + 4 phase 完成於 2026-05-15)
 - **Phase**: 全 4 phase 已完成
 - **Source**: 從 `wp-data-optimizer v2.16.0` 提煉
 
@@ -207,10 +207,59 @@
 | 2 | DDL 與並發 B1–B4（warm UNIQUE KEY → Zone_Cold save_patch → Zone_Warm increment） | ✅ 2026-07-31 |
 | 3 | 架構回填（Zone_Router + Routing_Predicate；13 個 Migration Phase 類別） | ✅ 2026-07-31 |
 | 4 | 相容層 E1–E7（雙向 hook 橋、57 個 AddOn alias、38 個 CLI 子指令、選單 slug） | ✅ 2026-07-31 |
-| 5 | AddOn 同步 F1–F5（Standard_Post_Interceptor、HP detector v3.4.5、WC） | ⬜ |
-| 6 | 功能與診斷 PR-G（crypto 健檢、doctor_callback ABI、15 個 usermeta 欄位…） | ⬜ |
-| 7 | 全域清理與 CI（strict_types、phpcs.xml、phpstan + baseline、gitea workflows） | ⬜ |
-| 退休 | 兩站台切到 B、移除 A、B 升 1.0.0 | ⬜ |
+| 5 | AddOn 同步 F1–F5（Standard_Post_Interceptor、HP detector v3.4.5、WC） | ✅ 2026-07-31 |
+| 6 | 功能與診斷 PR-G（crypto 健檢、doctor_callback ABI、15 個 usermeta 欄位…） | ✅ 2026-07-31（**Settings 分區 AJAX 未做**，見下） |
+| 7 | 全域清理與 CI（strict_types、phpcs.xml、phpstan + baseline、gitea workflows） | 🔶 strict_types / PHPCS / PHPStan / 3 個 workflow / ci-package.sh ✅；**測試補齊（剩 36 檔，多為 HP/WC）、文件移植未做** |
+| 退休 | 兩站台切到 B、移除 A、B 升 1.0.0 | 🔶 dev30 已切換並驗證通過；dev 未切、A 未移除、版本未升 |
+
+### dev30 實機驗證結果（2026-07-31）
+
+環境：`2meet-brandcards` 1.8.3 / `2meet-hub-core` 1.16.0 / `2meet-spoke-sso` 1.15.0 同時啟用；HivePress / WooCommerce 未安裝，故只啟用核心 + hub-addon + spoke-addon。
+
+| 項目 | A v3.0.0（切換前） | B v0.1.0（切換後） |
+|---|---|---|
+| `doctor` | 33 個 `[OK]` + 15 個 WC 表 MISSING 警告 | **49 個 `[OK]`、All checks passed** |
+| 姊妹外掛自訂表 | 36 張 OK | 36 張 OK（含 brandcards 的 `doctor_callback` 回傳訊息） |
+| 新健檢 | 無 | `Backup dir blocked (HTTP 404)`、`Crypto key derivable` 皆 OK |
+
+逐項確認：
+- **alias**：15 個核心類別 + trait + interface + `wpdo_run()` + `WPDO_VERSION` 全部可用
+- **CLI**：`wp tmdo bridge-status / crypto-status / mode-audit` 與 `wp wpdo *` 兩條路徑都通（38 個子指令）
+- **anti-EAV 寫入**：`WPDO_API::set_entity()` → `wp_wpdo_user_sso.known_login_ips` 寫入成功（A14 生效）
+- **audit**：`wp_wpdo_audit` 的 `group_name` / `action` / `trace_id`（UUIDv4）皆有值（A11/A12 生效）
+- **REST allowlist**：註冊 `show_in_rest => false` 的欄位不出現在 `get_rest_visible_hot_columns()`（A5/A6 生效）
+- **doctor_callback ABI 變更**：brandcards 既有 callback 在 1 參數簽章下仍正常
+- 前台 HTTP 200；`_load_textdomain_just_in_time` notice 僅出現在 `wp plugin activate` 當下（啟用鉤子早於 `init`），一般請求與前台皆無
+
+**實機才抓到的 fatal**：`TMDO_Logger::trace_id()` 在 B 提煉時遺漏，而 `Audit_Logger::write_row()` 會呼叫它。A12 把 Audit_Logger 掛上後，任何一次受管 meta 寫入都會 fatal。PHPUnit 沒有覆蓋 audit 寫入路徑 → 這類「跨模組才會踩到」的缺口只有實機能發現。
+
+### 尚未完成（follow-up）
+
+1. **Settings 分區 AJAX 儲存**（A v3.0.2）：`ajax_save_settings_section()` + 7 個 `save_section_*()` + `admin/assets/wpdo-settings.js`。B 目前是一次存全部的 inline `update_option` 巨塊，功能可用，屬 UX 改善。其中 `save_section_hp_transient` / `save_section_wc_term_count` 對應 AddOn 已移除的設定，移植時要拆掉或加 `class_exists` 守衛。
+2. ~~CI workflow~~ ✅ 三個檔已建，但 **B 沒有 git remote**，要推上 gitea 才會實際執行；推上去後還需設 repo secret `TMDO_TEST_DB_PASS`、var `RELEASE_GITEA_URL`、secret `RELEASE_TOKEN`，並開 main branch protection。11 個 AddOn 的 CI 仍未建。
+3. ~~`scripts/ci-package.sh`~~ ✅（委派共用 `package-plugin.sh`，實測 10 項終檢全 PASS）
+4. ~~補測試檔~~ ✅ 核心補 `HookBusIntegrationTest`（14）+ 新寫 `AuditLoggerIntegrationTest`（4）；HP AddOn 建 phpunit 基建並移植 25 檔（145 tests）；WC AddOn 建基建並移植 1 檔（10 tests）。11 個 AddOn 皆有 CI workflow（HP/WC 跑 lint+unit，其餘 9 個薄註冊層只跑 lint）。
+   - 仍缺：`TermCommentBackfillTest`（require HP AddOn 的 term-comment-fields，可移入 HP AddOn 套件）、`ListingStatsTest`（同上）、HP/WC 的 integration 測試（`HivepressIntegrationTest` ×3、`WCTermCountFilterTest`、`ListingMetaInterceptorTest`）——這些需要 AddOn 端的 integration bootstrap。
+
+### 全家族測試現況（2026-07-31）
+
+| 套件 | 結果 |
+|---|---|
+| 核心 unit | 451 tests / 889 assertions |
+| 核心 integration | 416 tests / 1165 assertions |
+| hivepress-addon unit | 145 tests / 357 assertions |
+| woocommerce-addon unit | 10 tests / 33 assertions |
+
+AddOn 測試 bootstrap 直接 `require` 核心 plugin 的 `tests/bootstrap.php`（避免複製 ~700 行 WP stub），因此 **AddOn 的 CI job 必須同時 checkout 核心 plugin**，workflow 已如此設定。
+5. **文件移植**：`readme.txt`、`CONTEXT.md`、`docs/`（ENTITY_ADAPTER_COOKBOOK、INTEGRATION_PATTERN_DECISION、2 篇 ADR）。
+6. **實機驗證與退休切換**：兩站台目前仍跑 A（dev = v3.4.6、dev30 = v3.0.0），B 家族 12 個外掛全 inactive，尚未做過 `wp tmdo doctor` 實機驗證。
+
+### ABI / 行為變更（升級須知）
+
+- `doctor_callback` 由 3 參數改為 1 參數（表名）——AddOn 若註冊過該 callback 需同步。
+- `wpdo_capture_before_value` 預設 `true` → `false`，每次受管寫入省一次 DB read；需要 `value_before` 的消費者（audit log）要 `add_filter( 'wpdo_capture_before_value', '__return_true' )`。
+- `wpdo_allow_mass_column_clear` 現為 opt-in：`delete_all=true` 的整欄清空預設被拒。
+- 選單 slug 由 `2meet-data-optimizer` 改回 `wp-data-optimizer`。
 
 ### Lessons learned（backport）
 
@@ -218,6 +267,7 @@
 - `composer update` 後 autoload 出現 `WPDO_Entity_Adapter_Interface` 三重宣告警告（`includes/adapters/interface-entity-adapter.php`、`back-compat/interface-wpdo-entity-adapter-alias.php`、`back-compat/trait-wpdo-anti-eav-aware-alias.php`）→ 階段 4 E2 要刪掉重複的那一份。
 - `TMDO_FSM_GUARD_DISABLED` 兩個 test bootstrap 原本都沒 define，但 `class-tmdo-feature-flags.php:128` 會檢查它 → 強制 FSM 轉換的測試會被 guard 擋掉（A 在 v3.4.6 踩過同一個坑）。
 - integration 測試需要 `TMDO_TEST_DB_PASS`（或 `WPDO_TEST_DB_PASS`）環境變數，DB 為本機 `wp_wpdo_test`。
+- **跑完 `scripts/ci-package.sh` 或 `package-plugin.sh` 後要重跑 `composer install`**：打包流程內含 `composer install --no-dev`，會把 `vendor/bin/{phpunit,phpcs,phpstan}` 移掉，之後任何測試指令都會 "No such file or directory"。
 - **A 不是照抄對象，有兩處自身缺陷不可照搬**：
   1. `A/includes/engine/class-wpdo-hook-bus.php:511,522` 傳 3 個 string 給 `Logger::warning( string $event, array $context )` → A 有 `strict_types`，mass-clear 路徑必炸。B 用正確簽章。
   2. `A/admin/class-wpdo-dashboard-widget.php:191` 的 `wpdo_postmeta_cleanup` 仍是 `wp_nonce_url` GET 連結，但其 handler 已只收 POST → 該按鈕在 A 是壞的。B 改成 form。
@@ -237,3 +287,28 @@
 - `v0.1.0` — 本 release（Phase 0-4 完成）
 - `v0.1.1` — Phase 5 follow-up（tests / PHPCS / packaging）
 - `v0.2.0` — WPDO_ deprecation notice + wpdo → tmdo migration CLI
+
+---
+
+## NinjaFirewall 相容性 ✅（2026-08-15，v1.0.2）
+
+計畫檔：`~/.claude/plans/2meet-data-optimizer-ninjafirewall-effervescent-lighthouse.md`
+
+- [x] 評估與 NinjaFirewall 4.9 的相容性 → **不需要開發 AddOn**
+- [x] 診斷 `Cannot retrieve user options from database (#3)` → 與本外掛無關，根因為 symlink 部署
+- [x] 建立 `/var/www/Studio/.htninja`（symlink-safe 站台錨點，全租戶共用）
+- [x] dev30 啟用 ninjafirewall，補上缺失的 `nfw_options` / `nfw_rules`
+- [x] `TMDO_Options_Manager::PROTECTED_OPTIONS` 守衛 + 4 個單元測試
+- [x] Migration Wizard 輪詢 500ms → 2s
+- [x] `docs/WAF-COMPATIBILITY.md`
+- [x] 全套件回歸：591 tests / 1166 assertions OK
+
+### Lessons learned（WAF）
+
+- **`__DIR__` 會解析 symlink**。NinjaFirewall Full WAF 用 `dirname(dirname(dirname(__DIR__)))`（`lib/firewall.php:78`）推導站台位置，在 symlink 共享 codebase 的 SaaS 架構下，所有租戶都會被判定成「共享目錄所屬的那個站」，於是連錯資料庫、撈不到自己的 `nfw_options`，回錯誤碼 6（訊息寫作 `#3`）。**per-site 的可靠錨點是 `$_SERVER['DOCUMENT_ROOT']`**（web server 的 root 指令值，不受 symlink 影響），這正是 `.htninja` 的搜尋基準。
+- **`.htninja` 放在 `dirname(DOCUMENT_ROOT)` 可服務全部租戶**（`firewall.php:47-48` 的第二順位），因為內容以 DOCUMENT_ROOT 動態推導，一份檔案通用。切勿在其中寫 `return` —— `'ALLOW'` / `'BLOCK'` 是有意義的回傳值。
+- **`NFW_LOG_DIR` 對 WP WAF 模式同樣必要**：L78 的誤判在兩種模式都存在，只是 WP WAF 不用它連 DB，但 log / cache / session 仍會全部寫進共享目錄互相覆蓋。
+- **WAF 失效是靜默的**。讀不到設定時 `nfw_quit()` 直接返回，不擋任何請求也不寫 log —— 「your site is not protected」是字面意思。因此任何會讓 `nfw_options` 離開 `wp_options` 的機制（例如本外掛的 `register_settings_group()` 重導向）都必須擋在註冊階段。
+- **`.user.ini` 必須讓 php-fpm worker 可讀**。dev32 那份是 `root:root 0640`，www-data 讀不到 → `auto_prepend_file` 靜默失效、Full WAF 等同沒裝。排查時容易誤判成「WAF 有在跑」，實際上擋下請求的是共享 mu-plugin 的 WP WAF。
+- **判斷 WAF 是否真的生效，要用會被規則擋的請求實測**（例如 `?x=../../etc/passwd` → 規則 1 → 403），光看首頁 200 或後台無錯誤訊息都不算數。
+- WP-CLI 完全豁免（`firewall.php:18-23`），所以 CLI 全綠**不能**當作「WAF 與外掛相容」的證據，必須另外走 HTTP 驗證。

README.md

@@ -119,9 +119,19 @@ GPL-2.0-or-later
 
 ## 文件
 
+- [readme.txt](readme.txt) — WordPress 外掛目錄格式說明（隨 ZIP 發佈）
+- [CONTEXT.md](CONTEXT.md) — 領域詞彙表（Zone / Registry / Mode / FSM 的正式定義）
 - [PLAN.md](PLAN.md) — 開發任務追蹤
 - [CHANGELOG.md](CHANGELOG.md) — 版本歷史
 - [DEPLOY.md](DEPLOY.md) — 部署流程
 - [SECURITY.md](SECURITY.md) — 安全聯絡
 - [DESIGN.md](DESIGN.md) — 架構決策
 - [CLAUDE.md](CLAUDE.md) — AI 協作指引
+
+給夥伴外掛作者（`docs/`，不進 ZIP）：
+
+- [ENTITY_ADAPTER_COOKBOOK.md](docs/ENTITY_ADAPTER_COOKBOOK.md) — 五層整合階梯與決策樹
+- [adr-001-post-entity-source-of-truth.md](docs/adr-001-post-entity-source-of-truth.md) — post entity 的權威來源契約
+- [adr-002-dual-write-naming-collision.md](docs/adr-002-dual-write-naming-collision.md) — `dual_write` 在兩套 FSM 的同名衝突
+- [INTEGRATION_PATTERN_DECISION.md](docs/INTEGRATION_PATTERN_DECISION.md) — 整合模式取捨紀錄（含 v1.0.0 後記）
+- [anti-eav-lint.yml.template](docs/anti-eav-lint.yml.template) — 夥伴外掛 CI gate 樣板

admin/assets/wpdo-admin.css

@@ -1,8 +1,8 @@
 /**
- * WP Data Optimizer — Admin Styles (Morandi Design System)
+ * 2meet Data Optimizer — Admin Styles (Morandi Design System)
  *
  * Morandi tokens are provided via the 'morandi-design-system' CSS dependency
- * registered in WPDO_Admin::enqueue_assets(). No @import needed.
+ * registered in TMDO_Admin::enqueue_assets(). No @import needed.
  */
 
 /* ── KPI Hero Strip (v2.16.0) ────────────────────────────────────────── */
@@ -512,4 +512,403 @@
 	.nav-tab .wpdo-tab-dot {
 		animation: none;
 	}
+	.wpdo-bar-fill,
+	.wpdo-eb-bar-fill,
+	.wpdo-setup-progress-fill { transition-duration: 0.01ms; }
 }
+
+/* ── v3.0.2 — Inline-style Elimination Utilities ────────────────────── */
+
+/* Margin / visibility */
+.wpdo-mt-0   { margin-top: 0; }
+.wpdo-mt-24  { margin-top: 24px; }
+.wpdo-hidden { display: none; }
+
+/* Semantic text colours */
+.wpdo-text-success    { color: #155724; }
+.wpdo-text-error      { color: #721c24; }
+.wpdo-text-muted      { color: #999; }
+.wpdo-text-warn       { color: #856404; }
+.wpdo-text-success-em { color: #46b450; font-weight: bold; }
+.wpdo-text-warn-em    { color: #dba617; font-weight: bold; }
+.wpdo-text-neutral    { color: #8c8f94; }
+.wpdo-text-skip       { color: #888; font-size: 0.9em; }
+.wpdo-check-success   { color: #155724; font-size: 12px; }
+
+/* Mode badges — small pill (Entity Bridge status table) */
+.wpdo-mode-sm {
+	display: inline-block;
+	padding: 2px 8px;
+	border-radius: 3px;
+	font-size: 12px;
+}
+/* Mode badges — round pill (Entity Bridge health cards) */
+.wpdo-mode-pill {
+	display: inline-block;
+	padding: 2px 10px;
+	border-radius: 20px;
+	font-size: 12px;
+	font-weight: 600;
+}
+.wpdo-mode--disabled    { background: #e0e0e0; color: #444; }
+.wpdo-mode--dual-write  { background: #d4edda; color: #155724; }
+.wpdo-mode--shadow-read { background: #fff3cd; color: #856404; }
+.wpdo-mode--aeav-only   { background: #cce5ff; color: #004085; }
+
+/* Entity Bridge grid */
+.wpdo-eb-grid {
+	display: grid;
+	grid-template-columns: repeat(auto-fit, minmax(380px, 1fr));
+	gap: 20px;
+	margin-top: 20px;
+}
+.wpdo-eb-card {
+	padding: 20px;
+	border-radius: 8px;
+	background: #fff;
+	box-shadow: 0 1px 4px rgba(0,0,0,.1);
+}
+.wpdo-eb-header {
+	display: flex;
+	justify-content: space-between;
+	align-items: flex-start;
+	margin-bottom: 12px;
+}
+.wpdo-eb-title      { margin: 0 0 4px; font-size: 16px; }
+.wpdo-mode-days     { margin-left: 8px; font-size: 12px; color: var(--color-text-secondary, #666); }
+.wpdo-mode-warn-sm  { font-size: 12px; color: #856404; background: #fff3cd; padding: 2px 8px; border-radius: 4px; }
+.wpdo-eb-pipeline   { display: flex; align-items: center; gap: 6px; flex-wrap: wrap; margin-bottom: 16px; font-size: 11px; }
+.wpdo-pipeline-arrow { color: #999; }
+.wpdo-stage-pill    { padding: 2px 8px; border-radius: 3px; }
+.wpdo-stage-pill--inactive { background: #f0f0f0; color: #666; }
+
+.wpdo-eb-tables-row {
+	margin-bottom: 14px;
+	padding: 6px 10px;
+	background: #f8f9fa;
+	border-radius: 4px;
+	font-size: 12px;
+	color: #555;
+	display: flex;
+	flex-wrap: wrap;
+	gap: 4px;
+	align-items: center;
+}
+.wpdo-eb-tables-label { font-weight: 600; margin-right: 4px; }
+.wpdo-eb-sep          { color: #ccc; }
+.wpdo-code-xs         { font-size: 11px; }
+
+.wpdo-eb-section       { margin-bottom: 14px; }
+.wpdo-eb-section-title { font-size: 12px; text-transform: uppercase; color: var(--color-text-secondary, #666); letter-spacing: .5px; font-weight: 600; }
+.wpdo-eb-group         { margin-top: 8px; }
+.wpdo-eb-group-header  { display: flex; justify-content: space-between; align-items: center; margin-bottom: 3px; }
+.wpdo-eb-group-name    { font-size: 13px; font-weight: 500; }
+.wpdo-eb-group-meta    { font-size: 12px; color: var(--color-text-secondary, #666); }
+.wpdo-eb-group-bar-row { display: flex; align-items: center; gap: 8px; }
+.wpdo-eb-bar-track     { flex: 1; height: 8px; background: #e0e0e0; border-radius: 4px; overflow: hidden; }
+.wpdo-eb-bar-fill      { height: 100%; width: var(--wpdo-eb-pct, 0%); background: var(--wpdo-eb-color, #28a745); transition: width .4s ease; border-radius: 4px; }
+.wpdo-eb-pct-label     { font-size: 12px; min-width: 42px; text-align: right; color: #333; }
+.wpdo-eb-key-hint      { font-size: 11px; color: #888; margin-top: 2px; }
+.wpdo-eb-actions       { margin-top: 6px; }
+
+.wpdo-eb-shadow-row  { margin-bottom: 12px; padding: 8px; background: #f8f9fa; border-radius: 4px; font-size: 13px; }
+.wpdo-eb-shadow-ok   { color: #28a745; font-size: 12px; }
+.wpdo-eb-shadow-warn { color: #dc3545; }
+
+.wpdo-eb-promote-row { margin-bottom: 12px; font-size: 12px; color: var(--color-text-secondary, #666); }
+.wpdo-eb-auto-ok     { color: #155724; }
+.wpdo-eb-auto-warn   { color: #856404; }
+.wpdo-eb-auto-badge  { background: #d4edda; color: #155724; padding: 1px 5px; border-radius: 3px; margin-left: 4px; font-size: 11px; }
+
+.wpdo-eb-info-row {
+	margin-bottom: 14px;
+	padding: 8px 10px;
+	background: #f0f4ff;
+	border-left: 3px solid #4f6ef7;
+	border-radius: 0 4px 4px 0;
+	font-size: 13px;
+	color: #333;
+}
+.wpdo-eb-button-row { display: flex; gap: 8px; flex-wrap: wrap; }
+.wpdo-eb-btn-dim    { opacity: .5; }
+
+.wpdo-eb-footer { margin-top: 24px; padding: 20px; background: #fff; border-radius: 8px; box-shadow: 0 1px 4px rgba(0,0,0,.1); }
+.wpdo-eb-ol     { margin-left: 20px; line-height: 1.9; font-size: 13px; }
+
+/* Stress-test table cells */
+.wpdo-td       { padding: 6px; }
+.wpdo-td-muted { padding: 6px; color: var(--color-text-secondary, #666); }
+.wpdo-td-val   { padding: 6px; font-weight: 600; }
+
+.wpdo-stats-table { width: 100%; font-size: 13px; margin-top: 10px; border-collapse: collapse; }
+
+/* Full-width progress bar */
+.wpdo-bar-track   { height: 14px; background: var(--color-bg-tertiary, #e0e0e0); border-radius: 7px; overflow: hidden; }
+.wpdo-bar-fill    { height: 100%; background: linear-gradient(90deg, #28a745, #20c997); width: var(--wpdo-bar-width, 0%); transition: width 0.4s; }
+.wpdo-bar-header  { display: flex; justify-content: space-between; align-items: center; margin-bottom: 6px; font-size: 13px; }
+.wpdo-bar-pct     { font-weight: 600; }
+.wpdo-bar-section { margin-bottom: 10px; }
+
+/* Layouts */
+.wpdo-grid-2col { display: grid; grid-template-columns: 1fr 1fr; gap: 20px; margin-top: 20px; }
+.wpdo-grid-4col { display: grid; grid-template-columns: repeat(4, 1fr); gap: 1rem; max-width: 720px; margin: 1rem 0; }
+
+/* Notices */
+.wpdo-notice-error {
+	margin: 14px 0;
+	padding: 12px 14px;
+	background: #f8d7da;
+	color: #721c24;
+	border-left: 4px solid #dc3545;
+	border-radius: 4px;
+	font-size: 13px;
+	line-height: 1.6;
+}
+.wpdo-notice-warn-inline { margin: 0; font-size: 12px; color: #856404; background: #fff3cd; padding: 6px 10px; border-radius: 4px; line-height: 1.6; }
+
+/* Count badge */
+.wpdo-count-danger { font-size: 18px; color: #dc3545; }
+
+/* Form helpers */
+.wpdo-th-main     { width: 35%; }
+.wpdo-label-block { display: block; margin-bottom: 6px; }
+.wpdo-hr-section  { margin: 18px 0; }
+
+/* Lists */
+.wpdo-list-disc     { list-style: disc; padding-left: 1.5em; }
+.wpdo-list-ol       { margin-left: 20px; line-height: 1.9; font-size: 13px; }
+.wpdo-list-ol-tight { margin: 6px 0 8px 22px; padding: 0; }
+
+/* Max-width constraints */
+.wpdo-max-520 { max-width: 520px; }
+.wpdo-max-600 { max-width: 600px; }
+.wpdo-max-720 { max-width: 720px; }
+.wpdo-max-800 { max-width: 800px; }
+
+/* Dashboard widget */
+.wpdo-widget-intro        { font-size: 1.1em; margin-bottom: 0.6em; }
+.wpdo-widget-link-right   { float: right; padding-top: 4px; }
+.wpdo-widget-notice       { margin: 0.6em 0; padding: 0.6em 0.8em; border-radius: 3px; }
+.wpdo-widget-notice-warn  { background: #fff8e5; border-left: 3px solid #dba617; }
+.wpdo-widget-notice-error { background: #fef0f0; border-left: 3px solid #dc3232; }
+.wpdo-widget-notice-info  { background: #e5f5fa; border-left: 3px solid #00a0d2; }
+.wpdo-widget-notice-neutral { background: #f6f7f7; border-left: 3px solid #2271b1; }
+.wpdo-widget-notice-ok    { background: #ecf7ed; border-left: 3px solid #46b450; }
+
+/* Setup wizard */
+.wpdo-setup-progress-track { background: #f0f0f1; height: 8px; border-radius: 4px; overflow: hidden; margin-bottom: 2em; }
+.wpdo-setup-progress-fill  { background: #2271b1; height: 100%; width: var(--wpdo-progress-pct, 0%); transition: width 0.3s; }
+.wpdo-setup-card-full      { max-width: none; padding: 2em; }
+.wpdo-setup-banner {
+	background: #f0f6fc;
+	border-left: 4px solid #2271b1;
+	padding: 0.75em 1em;
+	margin-bottom: 1em;
+	display: flex;
+	align-items: center;
+	gap: 1em;
+}
+.wpdo-setup-banner-btn { white-space: nowrap; }
+
+/* HivePress / WC tabs */
+.wpdo-cli-block  { background: #f6f7f7; padding: 12px; border-left: 4px solid #2271b1; }
+.wpdo-opacity-60 { opacity: .6; }
+
+/* Text colour — strong danger / amber (stress-test status) */
+.wpdo-text-danger { color: #dc3545; }
+.wpdo-text-amber  { color: #dba617; }
+
+/* Inline code on white bg (mode-card context) */
+.wpdo-code-white { background: #fff; padding: 2px 6px; border-radius: 3px; }
+
+/* Mode info card (stress-test modal-status section) */
+.wpdo-mode-card {
+	border-left-width: 4px;
+	border-left-style: solid;
+	border-radius: 6px;
+	margin-top: 16px;
+	font-size: 13px;
+	line-height: 1.7;
+}
+.wpdo-mode-card--ok   { background: #e8f5e9; border-left-color: #28a745; }
+.wpdo-mode-card--warn { background: #fff3cd; border-left-color: #dba617; }
+
+/* Settings link margin */
+.wpdo-ml-2 { margin-left: 8px; }
+
+/* Matrix / details table helpers */
+.wpdo-summary-toggle { cursor: pointer; color: #0073aa; font-weight: 600; }
+.wpdo-table-inset    { background: #fff; font-size: 12px; }
+.wpdo-tr-header th, .wpdo-tr-header td { background: #f0f0f0; }
+.wpdo-tr-highlight   { background: #fff8e1; }
+.wpdo-tr-success     { background: #e8f5e9; font-weight: 600; }
+
+/* Entity Bridge JS-hook class static styles (admin.php, updated by wpdo-entity-bridge.js) */
+.wpdo-entity-bridge-grid {
+	display: grid;
+	grid-template-columns: repeat(auto-fit, minmax(380px, 1fr));
+	gap: 20px;
+	margin-top: 20px;
+}
+.wpdo-mode-badge {
+	display: inline-block;
+	padding: 2px 10px;
+	border-radius: 20px;
+	font-size: 12px;
+	font-weight: 600;
+	transition: background-color var(--duration-normal, 200ms) var(--ease-default, ease),
+	            color var(--duration-normal, 200ms) var(--ease-default, ease);
+}
+/* JS sets className = 'wpdo-mode-badge wpdo-mode-disabled' etc. */
+.wpdo-mode-badge.wpdo-mode-disabled    { background: #e0e0e0; color: #444; }
+.wpdo-mode-badge.wpdo-mode-dual-write  { background: #d4edda; color: #155724; }
+.wpdo-mode-badge.wpdo-mode-shadow-read { background: #fff3cd; color: #856404; }
+.wpdo-mode-badge.wpdo-mode-aeav-only   { background: #cce5ff; color: #004085; }
+
+.wpdo-pipeline {
+	display: flex;
+	align-items: center;
+	gap: 6px;
+	flex-wrap: wrap;
+	margin-bottom: 16px;
+	font-size: 11px;
+}
+.wpdo-pipeline-dot       { padding: 2px 8px; border-radius: 3px; background: #f0f0f0; color: #666; }
+.wpdo-pipeline-inactive  { background: #f0f0f0; color: #666; }
+
+.wpdo-native-counts {
+	margin-bottom: 14px;
+	padding: 6px 10px;
+	background: #f8f9fa;
+	border-radius: 4px;
+	font-size: 12px;
+	color: #555;
+	display: flex;
+	flex-wrap: wrap;
+	gap: 4px;
+	align-items: center;
+}
+.wpdo-native-counts-label { font-weight: 600; margin-right: 4px; }
+.wpdo-native-sep          { color: #ccc; }
+
+.wpdo-mig-status { font-size: 11px; padding: 1px 6px; border-radius: 3px; background: #f0f0f0; }
+
+.wpdo-cov-pct      { font-size: 12px; min-width: 42px; text-align: right; color: #333; }
+.wpdo-cov-bar-fill { height: 100%; width: var(--wpdo-cov-pct, 0%); background: var(--wpdo-cov-color, #28a745); transition: width .4s ease; border-radius: 4px; }
+
+.wpdo-recommendation {
+	margin-bottom: 14px;
+	padding: 8px 10px;
+	background: #f0f4ff;
+	border-left: 3px solid #4f6ef7;
+	border-radius: 0 4px 4px 0;
+	font-size: 13px;
+	color: #333;
+}
+
+/* Settings tab helpers */
+.wpdo-h3-section  { margin-top: 2em; }
+.wpdo-h4-mb       { margin-bottom: 6px; }
+.wpdo-table-mb    { margin-bottom: 14px; }
+.wpdo-table-mb-sm { margin-bottom: 8px; }
+.wpdo-pre-code    { background: #f0f0f1; padding: 1em; overflow: auto; max-height: 400px; }
+.wpdo-details-section {
+	margin-top: 1.5em;
+	border: 1px solid #c3c4c7;
+	border-radius: 3px;
+	padding: 0.6em 1em;
+}
+.wpdo-label-inline   { display: inline-block; margin-right: 1em; margin-bottom: 0.3em; }
+.wpdo-description-mt { margin-top: 1em; }
+.wpdo-description-sm { margin-top: 0.25em; }
+.wpdo-description-xs { margin-top: 0.5em; font-size: 12px; }
+.wpdo-text-ok     { color: #46b450; font-weight: bold; }
+.wpdo-text-err    { color: #dc3232; font-weight: bold; }
+.wpdo-text-muted  { color: #666; font-size: 12px; }
+.wpdo-text-green  { color: #155724; }
+.wpdo-text-olive  { color: #856404; }
+.wpdo-text-green-bold  { color: #28a745; font-weight: 600; }
+.wpdo-text-red-bold    { color: #dc3545; font-weight: 600; }
+.wpdo-code-sm { margin-left: 8px; font-size: 11px; }
+.wpdo-badge-mode { display: inline-block; margin-left: 8px; padding: 2px 8px; border-radius: 3px; font-size: 11px; }
+
+/* Advisor confidence bar (Classifier tab) */
+.wpdo-advisor-bar-track {
+	display: inline-block;
+	background: #f0f0f1;
+	border-radius: 3px;
+	width: 80px;
+	height: 18px;
+	position: relative;
+	vertical-align: middle;
+}
+.wpdo-advisor-bar-fill {
+	position: absolute;
+	inset: 0 auto 0 0;
+	background: var(--wpdo-adv-color, #c3c4c7);
+	width: var(--wpdo-adv-width, 0%);
+	border-radius: 3px;
+}
+.wpdo-advisor-bar-label {
+	position: absolute;
+	inset: 0;
+	text-align: center;
+	font-size: 11px;
+	line-height: 18px;
+}
+
+/* EB card group section: empty state warning */
+.wpdo-eb-warn-box {
+	margin: 0;
+	font-size: 12px;
+	color: #856404;
+	background: #fff3cd;
+	padding: 6px 10px;
+	border-radius: 4px;
+	line-height: 1.6;
+}
+
+/* Additional utilities */
+.wpdo-text-dark-red  { color: #721c24; }
+.wpdo-text-red       { color: #dc3545; }
+.wpdo-ml-2           { margin-left: 8px; }
+.wpdo-form-table-mt0 { margin-top: 0; }
+.wpdo-badge-mode.wpdo-mode-disabled    { background: #e0e0e0; color: #444; }
+.wpdo-badge-mode.wpdo-mode-dual-write  { background: #d4edda; color: #155724; }
+.wpdo-badge-mode.wpdo-mode-shadow-read { background: #fff3cd; color: #856404; }
+.wpdo-badge-mode.wpdo-mode-aeav-only   { background: #cce5ff; color: #004085; }
+.wpdo-summary-section { cursor: pointer; font-weight: 600; font-size: 1.1em; }
+.wpdo-notice-warn-desc { margin-top: 8px; color: #856404; background: #fff3cd; padding: 8px 12px; border-radius: 4px; }
+.wpdo-card--light { background: #f6f7f7; }
+.wpdo-h3-sm       { font-size: 14px; }
+
+/* ── Settings section cards (task E) ─────────────────────────────── */
+.wpdo-settings-section {
+	background: var(--color-surface-card, #fbf7f0);
+	border: 1px solid var(--color-border-soft, #e5dccd);
+	border-radius: var(--radius-md, 12px);
+	padding: var(--space-4, 16px) var(--space-6, 24px);
+	margin-bottom: var(--space-5, 20px);
+}
+
+.wpdo-section-save-row {
+	display: flex;
+	align-items: center;
+	gap: var(--space-3, 12px);
+	padding-top: var(--space-3, 12px);
+}
+
+.wpdo-section-save-status {
+	font-size: 0.9rem;
+	color: var(--color-success, #5a8c5a);
+	opacity: 0;
+	transition: opacity var(--duration-normal, 200ms) var(--ease-default, ease);
+}
+
+.wpdo-section-save-status.visible {
+	opacity: 1;
+}
+
+/* Inline form wrapper — the GET → POST hardening (v1.0.0) turned several
+   action links into single-button forms; they must not break the row flow. */
+.wpdo-form-inline { display: inline; }

admin/assets/wpdo-migration-wizard.js

@@ -3,7 +3,7 @@
  *
  * - Confirms options + checkbox before starting.
  * - Calls REST endpoints under /wp-json/wpdo/v1/migration/.
- * - Polls /status every 500ms while job is active.
+ * - Polls /status every 2s while job is active.
  * - Streams log lines with fade-in; live-updates ratio + progress bar.
  *
  * @since 2.8.0
@@ -11,7 +11,7 @@
 (function () {
 	'use strict';
 
-	const POLL_INTERVAL_MS = 500;
+	const POLL_INTERVAL_MS = 2000;
 	const config = window.wpdoMigrationWizard || {};
 	const i18n = config.i18n || {};
 	const restUrl = (config.restUrl || '').replace(/\/$/, '');

admin/assets/wpdo-settings.js

@@ -0,0 +1,106 @@
+/**
+ * WP Data Optimizer — Settings per-section instant save.
+ *
+ * Each .wpdo-settings-section card has a "儲存此區塊" button that posts only
+ * that section's fields via AJAX, updating options without a full page reload.
+ *
+ * @since 3.0.2
+ */
+/* global wpdoSettings */
+( function () {
+	'use strict';
+
+	if ( typeof wpdoSettings === 'undefined' ) {
+		return;
+	}
+
+	const { ajaxUrl, nonce, i18n } = wpdoSettings;
+
+	/**
+	 * Collect form fields within a section into a FormData object.
+	 * Unchecked checkboxes are intentionally omitted (server does isset() ? '1' : '0').
+	 *
+	 * @param {HTMLElement} section
+	 * @returns {FormData}
+	 */
+	function collectFields( section ) {
+		const fd = new FormData();
+		section.querySelectorAll( 'input, select, textarea' ).forEach( ( el ) => {
+			if ( ! el.name ) {
+				return;
+			}
+			if ( el.type === 'checkbox' ) {
+				if ( el.checked ) {
+					fd.append( el.name, el.value );
+				}
+			} else if ( el.type === 'radio' ) {
+				if ( el.checked ) {
+					fd.append( el.name, el.value );
+				}
+			} else {
+				fd.append( el.name, el.value );
+			}
+		} );
+		return fd;
+	}
+
+	/**
+	 * Show a transient status message, then fade it out after 2.5s.
+	 *
+	 * @param {HTMLElement} statusEl
+	 * @param {string}      message
+	 * @param {boolean}     isError
+	 */
+	function showStatus( statusEl, message, isError ) {
+		statusEl.textContent = message;
+		statusEl.style.color = isError ? 'var(--color-error, #b03d3d)' : 'var(--color-success, #5a8c5a)';
+		statusEl.classList.add( 'visible' );
+		clearTimeout( statusEl._wpdo_timer );
+		statusEl._wpdo_timer = setTimeout( () => {
+			statusEl.classList.remove( 'visible' );
+		}, 2500 );
+	}
+
+	document.addEventListener( 'click', function ( e ) {
+		const btn = e.target.closest( '.wpdo-section-save' );
+		if ( ! btn ) {
+			return;
+		}
+		const section    = btn.closest( '.wpdo-settings-section' );
+		const statusEl   = btn.nextElementSibling;
+		const sectionKey = section ? section.dataset.section : '';
+		if ( ! sectionKey ) {
+			return;
+		}
+
+		const originalLabel = btn.textContent;
+		btn.disabled        = true;
+		btn.textContent     = i18n.saving;
+
+		const fd = collectFields( section );
+		fd.append( 'action', 'wpdo_save_settings_section' );
+		fd.append( '_ajax_nonce', nonce );
+		fd.append( 'section', sectionKey );
+
+		fetch( ajaxUrl, {
+			method      : 'POST',
+			credentials : 'same-origin',
+			body        : fd,
+		} )
+			.then( ( r ) => r.json() )
+			.then( ( data ) => {
+				if ( data.success ) {
+					showStatus( statusEl, i18n.saved, false );
+				} else {
+					showStatus( statusEl, i18n.error, true );
+				}
+			} )
+			.catch( () => {
+				showStatus( statusEl, i18n.error, true );
+			} )
+			.finally( () => {
+				btn.disabled    = false;
+				btn.textContent = originalLabel;
+			} );
+	} );
+} )();

admin/class-tmdo-dashboard-widget.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform admin UI: native postmeta count for dashboard widget
 /**
  * TMDO_Dashboard_Widget — wp-admin home dashboard widget (v2.4.0 M9).
  *
@@ -15,6 +14,10 @@
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform admin UI: native postmeta count for dashboard widget
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -76,7 +79,7 @@ class TMDO_Dashboard_Widget {
 		.wpdo-widget-actions a { margin-right: 0.5em; }
 		</style>
 
-		<p style="font-size: 1.1em; margin-bottom: 0.6em;">
+		<p class="wpdo-widget-intro">
 			<span class="wpdo-widget-light <?php echo esc_attr( $light['class'] ); ?>"></span>
 			<strong><?php echo esc_html( $light['label'] ); ?></strong>
 			<?php if ( $status['streak'] > 0 ) : ?>
@@ -92,7 +95,7 @@ class TMDO_Dashboard_Widget {
 		</p>
 
 		<?php if ( '' !== $status['summary_msg'] ) : ?>
-			<p class="description" style="margin-bottom: 0.8em;"><?php echo esc_html( $status['summary_msg'] ); ?></p>
+			<p class="description wpdo-mb-2"><?php echo esc_html( $status['summary_msg'] ); ?></p>
 		<?php endif; ?>
 
 		<div class="wpdo-widget-stats">
@@ -110,7 +113,7 @@ class TMDO_Dashboard_Widget {
 					<strong><?php echo esc_html( (string) (int) $status['conflicts'] ); ?></strong>
 					<?php if ( (int) $status['conflicts'] > 0 ) : ?>
 						<a href="<?php echo esc_url( add_query_arg( 'tab', 'conflicts', $page_url ) ); ?>"
-							style="margin-left:0.5em;"><?php esc_html_e( '查看', '2meet-data-optimizer' ); ?></a>
+							class="wpdo-mt-1"><?php esc_html_e( '查看', '2meet-data-optimizer' ); ?></a>
 					<?php endif; ?>
 				</span>
 			</div>
@@ -137,7 +140,7 @@ class TMDO_Dashboard_Widget {
 		if ( $actionable_count > 0 ) :
 			$ms_url = add_query_arg( 'tab', 'module-suggestions', $page_url );
 			?>
-			<p style="margin: 0.6em 0; padding: 0.5em 0.7em; background: #fff8e5; border-left: 3px solid #dba617; border-radius: 3px;">
+			<p class="wpdo-widget-notice wpdo-widget-notice-warn">
 				🤖 
 				<?php
 				printf(
@@ -159,7 +162,7 @@ class TMDO_Dashboard_Widget {
 		if ( ! empty( $attn['needs'] ) && 'running' !== ( $attn['job_state'] ?? '' ) ) :
 			$wizard_url = add_query_arg( 'tab', 'migration-wizard', $page_url );
 			?>
-			<p style="margin: 0.6em 0; padding: 0.6em 0.8em; background: #fef0f0; border-left: 3px solid #dc3232; border-radius: 3px;">
+			<p class="wpdo-widget-notice wpdo-widget-notice-error">
 				🔴
 				<?php
 				/* translators: 1: EAV row count, 2: group count, 3: ratio. */
@@ -174,7 +177,7 @@ class TMDO_Dashboard_Widget {
 				<a href="<?php echo esc_url( $wizard_url ); ?>"><strong><?php esc_html_e( 'User 遷移精靈 →', '2meet-data-optimizer' ); ?></strong></a>
 			</p>
 		<?php elseif ( 'running' === ( $attn['job_state'] ?? '' ) ) : ?>
-			<p style="margin: 0.6em 0; padding: 0.6em 0.8em; background: #e5f5fa; border-left: 3px solid #00a0d2; border-radius: 3px;">
+			<p class="wpdo-widget-notice wpdo-widget-notice-info">
 				⏳ <?php esc_html_e( 'User 遷移精靈正在執行中 —', '2meet-data-optimizer' ); ?>
 				<a href="<?php echo esc_url( add_query_arg( 'tab', 'migration-wizard', $page_url ) ); ?>"><?php esc_html_e( '查看進度', '2meet-data-optimizer' ); ?></a>
 			</p>
@@ -192,7 +195,7 @@ class TMDO_Dashboard_Widget {
 				number_format_i18n( (int) $gc['total'] )
 			);
 			?>
-			<p style="margin: 0.6em 0; padding: 0.6em 0.8em; background: #f6f7f7; border-left: 3px solid #2271b1; border-radius: 3px;">
+			<p class="wpdo-widget-notice wpdo-widget-notice-neutral">
 				🧹
 				<?php
 				/* translators: 1: total rows, 2: transients, 3: wp_old_date, 4: edit_locks */
@@ -205,7 +208,7 @@ class TMDO_Dashboard_Widget {
 					esc_html( number_format_i18n( (int) $gc['edit_locks'] ) )
 				);
 				?>
-				<form method="post" action="<?php echo esc_url( $page_url ); ?>" style="display:inline">
+				<form method="post" action="<?php echo esc_url( $page_url ); ?>" class="wpdo-form-inline">
 					<input type="hidden" name="wpdo_postmeta_cleanup" value="1">
 					<?php wp_nonce_field( 'wpdo_postmeta_cleanup' ); ?>
 					<button type="submit" class="button-link"
@@ -243,7 +246,7 @@ class TMDO_Dashboard_Widget {
 					'%2$s'
 				);
 			?>
-			<p style="margin: 0.6em 0; padding: 0.6em 0.8em; background: <?php echo esc_attr( $post_bg ); ?>; border-left: 3px solid <?php echo esc_attr( $post_color ); ?>; border-radius: 3px;">
+			<p class="wpdo-widget-notice <?php echo $total_eav > 0 ? 'wpdo-widget-notice-warn' : 'wpdo-widget-notice-ok'; ?>">
 				📦
 				<?php
 				if ( $total_eav > 0 ) {
@@ -273,7 +276,7 @@ class TMDO_Dashboard_Widget {
 		<?php endif; ?>
 
 		<div class="wpdo-widget-actions">
-			<form method="post" action="<?php echo esc_url( $page_url ); ?>" style="display:inline">
+			<form method="post" action="<?php echo esc_url( $page_url ); ?>" class="wpdo-form-inline">
 				<input type="hidden" name="wpdo_run_health" value="1">
 				<?php wp_nonce_field( 'wpdo_run_health' ); ?>
 				<button type="submit" class="button button-small button-primary"><?php esc_html_e( '跑健康檢查', '2meet-data-optimizer' ); ?></button>
@@ -281,12 +284,12 @@ class TMDO_Dashboard_Widget {
 			<a class="button button-small" href="<?php echo esc_url( $bridge_url ); ?>">
 				<?php esc_html_e( 'Entity Bridge', '2meet-data-optimizer' ); ?>
 			</a>
-			<form method="post" action="<?php echo esc_url( $page_url ); ?>" style="display:inline">
+			<form method="post" action="<?php echo esc_url( $page_url ); ?>" class="wpdo-form-inline">
 				<input type="hidden" name="wpdo_create_snapshot" value="1">
 				<?php wp_nonce_field( 'wpdo_create_snapshot' ); ?>
 				<button type="submit" class="button button-small"><?php esc_html_e( '建立快照', '2meet-data-optimizer' ); ?></button>
 			</form>
-			<a href="<?php echo esc_url( $page_url ); ?>" style="float: right; padding-top: 4px;">
+			<a href="<?php echo esc_url( $page_url ); ?>" class="wpdo-widget-link-right">
 				<?php esc_html_e( '完整儀表板 →', '2meet-data-optimizer' ); ?>
 			</a>
 		</div>

admin/class-tmdo-deprecated-addons-notice.php

@@ -0,0 +1,91 @@
+<?php
+/**
+ * Admin notice for the deprecated in-house partner AddOns.
+ *
+ * The AddOns for 2meet's own plugins (bookings, collab, hub, infocards,
+ * mobile-bridge, playlist, quotation, spoke) only registered tables and fields
+ * on the partner's behalf. Partner plugins now register themselves with the
+ * TMDO_Anti_EAV_Aware trait (docs/PARTNER-REGISTRATION.md), so these AddOns
+ * are deprecated and will be removed. The SSO data needs no AddOn at all:
+ * the hub, spoke and SSO AddOns go without replacement (the `sso` group gave
+ * no measurable gain over usermeta) once its values are written back.
+ *
+ * @package WP_Data_Optimizer
+ */
+
+declare(strict_types=1);
+
+if ( ! defined( 'ABSPATH' ) ) {
+	exit;
+}
+
+/**
+ * Warns admins who still run one of the deprecated partner AddOns.
+ */
+final class TMDO_Deprecated_Addons_Notice {
+
+	/** In-house plugins whose AddOn is replaced by partner self-registration. */
+	private const SLUGS = array( 'bookings', 'collab', 'hub', 'infocards', 'mobile-bridge', 'playlist', 'quotation', 'spoke', 'sso' );
+
+	/**
+	 * Hook the notice.
+	 *
+	 * @return void
+	 */
+	public static function register(): void {
+		add_action( 'admin_notices', array( __CLASS__, 'render' ) );
+	}
+
+	/**
+	 * Slugs of the deprecated AddOns active on this site (or network-wide).
+	 *
+	 * @return string[]
+	 */
+	public static function active(): array {
+		$active = (array) get_option( 'active_plugins', array() );
+		if ( is_multisite() ) {
+			$active = array_merge( $active, array_keys( (array) get_site_option( 'active_sitewide_plugins', array() ) ) );
+		}
+		return array_values(
+			array_filter(
+				self::SLUGS,
+				static fn( string $slug ): bool => in_array( "2meet-data-optimizer-{$slug}-addon/2meet-data-optimizer-{$slug}-addon.php", $active, true )
+			)
+		);
+	}
+
+	/**
+	 * Print the notice for administrators when any deprecated AddOn is active.
+	 *
+	 * @return void
+	 */
+	public static function render(): void {
+		if ( ! current_user_can( 'manage_options' ) ) {
+			return;
+		}
+		$active = self::active();
+		if ( empty( $active ) ) {
+			return;
+		}
+
+		$names = implode( ', ', array_map( static fn( string $slug ): string => "2meet-data-optimizer-{$slug}-addon", $active ) );
+		printf(
+			'<div class="notice notice-warning"><p><strong>%s</strong> %s</p><p>%s</p></div>',
+			esc_html__( '2meet Data Optimizer：', '2meet-data-optimizer' ),
+			esc_html(
+				sprintf(
+					/* translators: %s: comma-separated AddOn plugin slugs */
+					__( '以下 AddOn 已淘汰：%s。對應的 2meet 外掛改為自行向核心註冊資料表與欄位，AddOn 之後會移除。', '2meet-data-optimizer' ),
+					$names
+				)
+			),
+			esc_html__( '改寫方式見 2meet-data-optimizer 外掛內的 docs/PARTNER-REGISTRATION.md；partner 外掛完成自行註冊後即可停用對應 AddOn。', '2meet-data-optimizer' )
+		);
+		if ( array_intersect( $active, array( 'hub', 'spoke', 'sso' ) ) ) {
+			printf(
+				'<div class="notice notice-warning"><p>%s</p></div>',
+				esc_html__( 'Hub / Spoke / SSO AddOn 不需替代：2meet-hub-core 與 2meet-spoke-sso 會自行註冊資料表，SSO 值存回 usermeta 即可。停用前先執行 wp tmdo bridge-restore-native user --group=sso --retire。', '2meet-data-optimizer' )
+			);
+		}
+	}
+}

admin/class-tmdo-export.php

@@ -15,6 +15,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

admin/class-tmdo-help-tabs.php

@@ -14,6 +14,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -104,8 +106,8 @@ class TMDO_Help_Tabs {
 	 */
 	private static function content_dashboard(): string {
 		return '<p>' . esc_html__( '儀表板顯示：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
-			. '<li>' . esc_html__( 'System Overview — DB 引擎、HivePress、HPCT、Object Cache 是否啟用', '2meet-data-optimizer' ) . '</li>'
+			. '<ul class="wpdo-list-disc">'
+			. '<li>' . esc_html__( 'System Overview — DB 引擎、HivePress、Object Cache 是否啟用', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( 'Zone 行數統計 — Hot/Warm/Cold/Archive 各自累積多少資料', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( 'Module 狀態 — 每個 module 在 7-state FSM 哪一格', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( 'Warm zone live view — 哪些 view counts / TTL 進來、24h 快過期數', '2meet-data-optimizer' ) . '</li>'
@@ -121,7 +123,7 @@ class TMDO_Help_Tabs {
 	 */
 	private static function content_zones(): string {
 		return '<p>' . esc_html__( '4 個 Zone 對應不同存取頻率與保留需求：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
+			. '<ul class="wpdo-list-disc">'
 			. '<li><strong>Hot</strong> — ' . esc_html__( '高頻索引欄位，如 listing 的 price / location。獨立 column + index，WP_Query 可 JOIN。', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>Warm</strong> — ' . esc_html__( 'TTL 暫存（如 view count、cache stats）。固定表 wp_wpdo_warm 含 expires_at。', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>Cold</strong> — ' . esc_html__( '低頻 meta（settings / preferences）。讀寫透過 interceptor 攔截後保持 EAV 形式。', '2meet-data-optimizer' ) . '</li>'
@@ -137,7 +139,7 @@ class TMDO_Help_Tabs {
 	 */
 	private static function content_classifier(): string {
 		return '<p>' . esc_html__( 'Classifier 分析 wp_postmeta 給每個 meta_key 一個 zone 建議：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
+			. '<ul class="wpdo-list-disc">'
 			. '<li><strong>Confidence</strong> — ' . esc_html__( '0.0~1.0，越高代表分類越確定。≥ 0.8 可放心採納，< 0.5 建議 manual review。', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>Reasons</strong> — ' . esc_html__( '說明為什麼建議這個 zone（access frequency / row count / TTL hints）。', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>Already-assigned</strong> — ' . esc_html__( '已透過 Schema_Registry 註冊的 meta_key 數量。', '2meet-data-optimizer' ) . '</li>'
@@ -151,7 +153,7 @@ class TMDO_Help_Tabs {
 	 */
 	private static function content_snapshots(): string {
 		return '<p>' . esc_html__( '快照保留政策（v2.2.0）：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
+			. '<ul class="wpdo-list-disc">'
 			. '<li>' . esc_html__( '預設 30 天 TTL，可在 wp wpdo snapshot create 時用 --retention-days 覆蓋。', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( 'pre_uninstall / pre_v2_upgrade triggers 受 size-cap 保護（不會被自動 evict）。', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( '檔案存於 wp-content/uploads/wpdo-backups/，含 .htaccess deny all + 每個檔 sha256 校驗。', '2meet-data-optimizer' ) . '</li>'
@@ -169,9 +171,8 @@ class TMDO_Help_Tabs {
 	private static function content_conflicts(): string {
 		return '<p>' . esc_html__( 'Hook 衝突偵測：當多個 plugin 在同一 WordPress 的 metadata filter 上掛 callback 時，可能造成資料寫入順序不確定 / 重複處理。', '2meet-data-optimizer' ) . '</p>'
 			. '<p>' . esc_html__( '常見原因：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
+			. '<ul class="wpdo-list-disc">'
 			. '<li>' . esc_html__( 'Hook Bus 啟用（wpdo_hook_bus_enabled = 1）+ legacy interceptors 還沒卸載', '2meet-data-optimizer' ) . '</li>'
-			. '<li>' . esc_html__( 'HPCT (HP Custom Tables) plugin 還沒移除 — 與 WPDO 同時攔截', '2meet-data-optimizer' ) . '</li>'
 			. '</ul>'
 			. '<p>' . esc_html__( '解法：先看 conflict-scan 詳情，必要時用 wp wpdo bridge-set off 暫停 Hook Bus 直到清理完。', '2meet-data-optimizer' ) . '</p>';
 	}
@@ -182,8 +183,8 @@ class TMDO_Help_Tabs {
 	 * @return string
 	 */
 	private static function content_doctor(): string {
-		return '<p>' . esc_html__( '7 項自動健康檢查：', '2meet-data-optimizer' ) . '</p>'
-			. '<ol style="padding-left: 1.5em;">'
+		return '<p>' . esc_html__( '10 項自動健康檢查：', '2meet-data-optimizer' ) . '</p>'
+			. '<ol class="wpdo-list-disc">'
 			. '<li><strong>schema_drift</strong> — ' . esc_html__( '所有 v2 表是否存在', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>error_budget</strong> — ' . esc_html__( '7 天內 wp_wpdo_errors 行數', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>hook_conflicts</strong> — ' . esc_html__( '同上 conflicts tab', '2meet-data-optimizer' ) . '</li>'
@@ -191,6 +192,9 @@ class TMDO_Help_Tabs {
 			. '<li><strong>postmeta_explosion</strong> — ' . esc_html__( 'wp_postmeta > 5M 行', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>orphan_zone_rows</strong> — ' . esc_html__( '已 idle 的 module 但 zone 表還有資料', '2meet-data-optimizer' ) . '</li>'
 			. '<li><strong>missing_snapshot</strong> — ' . esc_html__( '在 cutover/cleanup/complete 但 7 天沒 snapshot', '2meet-data-optimizer' ) . '</li>'
+			. '<li><strong>entity_group_collisions</strong> — ' . esc_html__( '同名實體群組被不同外掛以不同欄位註冊（後者被忽略）', '2meet-data-optimizer' ) . '</li>'
+			. '<li><strong>orphaned_entity_groups</strong> — ' . esc_html__( '扁平表還在但已無外掛註冊的群組（已依保存的定義還原以維持可讀）', '2meet-data-optimizer' ) . '</li>'
+			. '<li><strong>missing_integration_addons</strong> — ' . esc_html__( 'HivePress / WooCommerce 已啟用但對應 AddOn 未啟用', '2meet-data-optimizer' ) . '</li>'
 			. '</ol>'
 			. '<p>' . esc_html__( '結果有 5 分鐘 transient cache，剛操作完想立刻看新值請等下個週期。', '2meet-data-optimizer' ) . '</p>';
 	}
@@ -202,7 +206,7 @@ class TMDO_Help_Tabs {
 	 */
 	private static function content_logs(): string {
 		return '<p>' . esc_html__( '日誌讀取：', '2meet-data-optimizer' ) . '</p>'
-			. '<ul style="list-style: disc; padding-left: 1.5em;">'
+			. '<ul class="wpdo-list-disc">'
 			. '<li>' . esc_html__( '每筆對應 wp_wpdo_errors 一行：module / zone / hook / message / timestamp。', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( '預設保留 90 天（wpdo_errors_gc daily cron 自動清）。', '2meet-data-optimizer' ) . '</li>'
 			. '<li>' . esc_html__( '看 message 開頭 [WARN] 是 warning level（不影響運作但需注意）。', '2meet-data-optimizer' ) . '</li>'

admin/class-tmdo-missing-addons-notice.php

@@ -0,0 +1,62 @@
+<?php
+/**
+ * Admin notice when HivePress / WooCommerce run without their AddOn.
+ *
+ * Core knows nothing about either plugin; their fields are only optimised by
+ * the matching AddOn. Without it, aeav_only data stays readable only through
+ * the orphan-group restore, and new data is not optimised at all.
+ *
+ * @package WP_Data_Optimizer
+ */
+
+declare(strict_types=1);
+
+if ( ! defined( 'ABSPATH' ) ) {
+	exit;
+}
+
+/**
+ * Warns administrators about integrations whose AddOn is not active.
+ */
+final class TMDO_Missing_Addons_Notice {
+
+	/**
+	 * Hook the notice.
+	 *
+	 * @return void
+	 */
+	public static function register(): void {
+		add_action( 'admin_notices', array( __CLASS__, 'render' ) );
+	}
+
+	/**
+	 * Print the notice for administrators when an integration lacks its AddOn.
+	 *
+	 * @return void
+	 */
+	public static function render(): void {
+		if ( ! current_user_can( 'manage_options' ) ) {
+			return;
+		}
+		$missing = TMDO_Compatibility::missing_integration_addons();
+		if ( empty( $missing ) ) {
+			return;
+		}
+
+		$lines = array();
+		foreach ( $missing as $plugin => $addon ) {
+			$lines[] = sprintf( '%s → %s', $plugin, $addon );
+		}
+		printf(
+			'<div class="notice notice-warning"><p><strong>%s</strong> %s</p></div>',
+			esc_html__( '2meet Data Optimizer：', '2meet-data-optimizer' ),
+			esc_html(
+				sprintf(
+					/* translators: %s: "Plugin → AddOn" pairs */
+					__( '以下外掛已啟用，但對應的 AddOn 沒有啟用，它們的欄位不會被優化：%s。請啟用對應的 AddOn。', '2meet-data-optimizer' ),
+					implode( '；', $lines )
+				)
+			)
+		);
+	}
+}

admin/class-tmdo-setup-wizard.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform admin UI: postmeta inventory for setup wizard
 /**
  * TMDO_Setup_Wizard — First-run onboarding wizard (v2.3.0 M5).
  *
@@ -20,6 +19,10 @@
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform admin UI: postmeta inventory for setup wizard
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -125,7 +128,7 @@ class TMDO_Setup_Wizard {
 		$step      = max( 1, min( self::TOTAL_STEPS, absint( wp_unslash( $_GET['step'] ?? 1 ) ) ) ); // phpcs:ignore WordPress.Security.NonceVerification.Recommended
 		$completed = '1' === get_option( self::OPT_COMPLETED );
 		?>
-		<div class="wrap" style="max-width: 800px;">
+		<div class="wrap wpdo-max-800">
 			<p>
 				<a href="<?php echo esc_url( admin_url( 'tools.php?page=wp-data-optimizer' ) ); ?>">
 					&larr; <?php esc_html_e( '返回 WP Data Optimizer', '2meet-data-optimizer' ); ?>
@@ -134,11 +137,11 @@ class TMDO_Setup_Wizard {
 			<h1><?php esc_html_e( 'WP Data Optimizer — 設定嚮導', '2meet-data-optimizer' ); ?></h1>
 
 			<?php if ( $completed ) : ?>
-			<div style="background:#f0f6fc; border-left:4px solid #2271b1; padding:0.75em 1em; margin-bottom:1em; display:flex; align-items:center; gap:1em;">
+			<div class="wpdo-setup-banner">
 				<span>✅ <?php esc_html_e( '嚮導已完成。你可以重新瀏覽任何步驟，或重設為全新執行。', '2meet-data-optimizer' ); ?></span>
-				<a class="button button-secondary"
+				<a class="button button-secondary wpdo-setup-banner-btn"
 					href="<?php echo esc_url( wp_nonce_url( admin_url( 'admin-post.php?action=wpdo_wizard_reset' ), self::NONCE_NAME ) ); ?>"
-					style="white-space:nowrap;">
+					>
 					<?php esc_html_e( '重新執行精靈', '2meet-data-optimizer' ); ?>
 				</a>
 			</div>
@@ -151,17 +154,17 @@ class TMDO_Setup_Wizard {
 				<?php esc_html_e( '步', '2meet-data-optimizer' ); ?>
 			</p>
 
-			<div style="background: #f0f0f1; height: 8px; border-radius: 4px; overflow: hidden; margin-bottom: 2em;">
-				<div style="background: #2271b1; height: 100%; width: <?php echo (int) ( $step / self::TOTAL_STEPS * 100 ); ?>%; transition: width 0.3s;"></div>
+			<div class="wpdo-setup-progress-track">
+				<div class="wpdo-setup-progress-fill" style="--wpdo-progress-pct:<?php echo (int) ( $step / self::TOTAL_STEPS * 100 ); ?>%"></div>
 			</div>
 
-			<div class="card" style="max-width: none; padding: 2em;">
+			<div class="card wpdo-setup-card-full">
 				<?php call_user_func( array( __CLASS__, 'render_step_' . $step ) ); ?>
 			</div>
 
-			<p style="margin-top: 2em;">
+			<p class="wpdo-mt-3">
 				<a href="<?php echo esc_url( wp_nonce_url( admin_url( 'admin-post.php?action=wpdo_wizard_dismiss' ), self::NONCE_NAME ) ); ?>"
-					style="color: #888; font-size: 0.9em;">
+					class="wpdo-text-skip">
 					<?php esc_html_e( '我熟悉了，跳過嚮導', '2meet-data-optimizer' ); ?>
 				</a>
 			</p>
@@ -182,7 +185,7 @@ class TMDO_Setup_Wizard {
 		<p><?php esc_html_e( 'WPDO 解決的是 wp_postmeta 表「meta 爆炸」問題：當 postmeta 累積到數百萬行時，autoload 變大、JOIN 變慢、整站變慢。', '2meet-data-optimizer' ); ?></p>
 
 		<h3><?php esc_html_e( '4 個 Zone 是什麼？', '2meet-data-optimizer' ); ?></h3>
-		<table class="widefat" style="margin-bottom: 1em;">
+		<table class="widefat wpdo-mb-2">
 			<thead>
 				<tr><th>Zone</th><th><?php esc_html_e( '用途', '2meet-data-optimizer' ); ?></th><th><?php esc_html_e( '舉例', '2meet-data-optimizer' ); ?></th></tr>
 			</thead>
@@ -195,13 +198,13 @@ class TMDO_Setup_Wizard {
 		</table>
 
 		<h3><?php esc_html_e( '何時需要 WPDO？', '2meet-data-optimizer' ); ?></h3>
-		<ul style="list-style: disc; padding-left: 1.5em;">
+		<ul class="wpdo-list-disc">
 			<li><?php esc_html_e( '✅ wp_postmeta 行數 > 100k 開始考慮', '2meet-data-optimizer' ); ?></li>
 			<li><?php esc_html_e( '✅ 行數 > 1M 強烈建議啟用', '2meet-data-optimizer' ); ?></li>
 			<li><?php esc_html_e( '⚠️ 小站台（< 10k 行）可以裝著但別啟用 module', '2meet-data-optimizer' ); ?></li>
 		</ul>
 
-		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" style="margin-top: 2em;">
+		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" class="wpdo-mt-3">
 			<input type="hidden" name="page" value="wpdo-setup-wizard">
 			<input type="hidden" name="step" value="2">
 			<button class="button button-primary button-hero"><?php esc_html_e( '下一步：跑健診 →', '2meet-data-optimizer' ); ?></button>
@@ -221,18 +224,18 @@ class TMDO_Setup_Wizard {
 		$top_keys       = $wpdb->get_results( "SELECT meta_key, COUNT(*) AS c FROM `{$wpdb->postmeta}` GROUP BY meta_key ORDER BY c DESC LIMIT 10", ARRAY_A ); // phpcs:ignore WordPress.DB
 		?>
 		<h2><?php esc_html_e( '🔬 Baseline 健診', '2meet-data-optimizer' ); ?></h2>
-		<table class="widefat striped" style="max-width: 600px; margin-bottom: 1em;">
+		<table class="widefat striped wpdo-max-600 wpdo-mb-2">
 			<tbody>
 				<tr><th><?php esc_html_e( 'wp_postmeta 行數', '2meet-data-optimizer' ); ?></th><td><strong><?php echo esc_html( number_format_i18n( $pm_count ) ); ?></strong></td></tr>
 				<tr><th><?php esc_html_e( 'autoload 大小', '2meet-data-optimizer' ); ?></th><td><strong><?php echo esc_html( size_format( $autoload_bytes, 1 ) ); ?></strong></td></tr>
 				<tr><th><?php esc_html_e( '建議啟用 WPDO？', '2meet-data-optimizer' ); ?></th>
 					<td>
 						<?php if ( $pm_count > 1_000_000 ) : ?>
-							<span style="color: #46b450; font-weight: bold;">✅ <?php esc_html_e( '強烈建議', '2meet-data-optimizer' ); ?></span>
+							<span class="wpdo-text-success-em">✅ <?php esc_html_e( '強烈建議', '2meet-data-optimizer' ); ?></span>
 						<?php elseif ( $pm_count > 100_000 ) : ?>
-							<span style="color: #dba617; font-weight: bold;">🟡 <?php esc_html_e( '可以考慮', '2meet-data-optimizer' ); ?></span>
+							<span class="wpdo-text-warn-em">🟡 <?php esc_html_e( '可以考慮', '2meet-data-optimizer' ); ?></span>
 						<?php else : ?>
-							<span style="color: #8c8f94;">⏸ <?php esc_html_e( '尚不必', '2meet-data-optimizer' ); ?></span>
+							<span class="wpdo-text-neutral">⏸ <?php esc_html_e( '尚不必', '2meet-data-optimizer' ); ?></span>
 						<?php endif; ?>
 					</td>
 				</tr>
@@ -249,7 +252,7 @@ class TMDO_Setup_Wizard {
 			</tbody>
 		</table>
 
-		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" style="margin-top: 2em;">
+		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" class="wpdo-mt-3">
 			<input type="hidden" name="page" value="wpdo-setup-wizard">
 			<input type="hidden" name="step" value="3">
 			<button class="button button-primary button-hero"><?php esc_html_e( '下一步：看建議 →', '2meet-data-optimizer' ); ?></button>
@@ -275,7 +278,7 @@ class TMDO_Setup_Wizard {
 		?>
 
 		<?php if ( empty( $actionable ) ) : ?>
-			<div class="notice notice-info inline" style="padding: 1em;">
+			<div class="notice notice-info inline">
 				<p><?php esc_html_e( '目前環境暫無高 confidence 的 module 建議。可隨時前往「模組建議」tab 重新檢查。', '2meet-data-optimizer' ); ?></p>
 			</div>
 		<?php else : ?>
@@ -313,13 +316,13 @@ class TMDO_Setup_Wizard {
 		<?php endif; ?>
 
 		<h3><?php esc_html_e( '黃金法則', '2meet-data-optimizer' ); ?></h3>
-		<ul style="list-style: disc; padding-left: 1.5em;">
+		<ul class="wpdo-list-disc">
 			<li><?php esc_html_e( '一次只推進 1 個 module，每階段觀察至少 24-48 小時。', '2meet-data-optimizer' ); ?></li>
 			<li><?php esc_html_e( '進 cutover 前一定要有 snapshot（FSM Guard 自動觸發）。', '2meet-data-optimizer' ); ?></li>
 			<li><?php esc_html_e( '出事第一件事：rewind 該 module 到 idle（emergency 流程）。', '2meet-data-optimizer' ); ?></li>
 		</ul>
 
-		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" style="margin-top: 2em;">
+		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" class="wpdo-mt-3">
 			<input type="hidden" name="page" value="wpdo-setup-wizard">
 			<input type="hidden" name="step" value="4">
 			<button class="button button-primary button-hero"><?php esc_html_e( '下一步：建第一個 snapshot →', '2meet-data-optimizer' ); ?></button>
@@ -340,10 +343,10 @@ class TMDO_Setup_Wizard {
 
 		<h3><?php esc_html_e( '📦 Snapshot', '2meet-data-optimizer' ); ?></h3>
 		<?php if ( $snapshot_taken ) : ?>
-			<p style="color: #46b450; font-weight: bold;">✅ <?php esc_html_e( '快照已建立。可隨時於「備份快照」tab 查看與管理。', '2meet-data-optimizer' ); ?></p>
+			<p class="wpdo-text-success-em">✅ <?php esc_html_e( '快照已建立。可隨時於「備份快照」tab 查看與管理。', '2meet-data-optimizer' ); ?></p>
 		<?php else : ?>
 			<p><?php esc_html_e( '我們會建立一個 baseline snapshot，命名為 wizard_baseline，保留 365 天。即使你日後沒做任何 destructive 操作，這也是一個 known-good 還原點。', '2meet-data-optimizer' ); ?></p>
-			<form method="post" action="<?php echo esc_url( admin_url( 'tools.php?page=wpdo-setup-wizard&step=4' ) ); ?>" style="display:inline">
+			<form method="post" action="<?php echo esc_url( admin_url( 'tools.php?page=wpdo-setup-wizard&step=4' ) ); ?>" class="wpdo-form-inline">
 				<?php wp_nonce_field( self::NONCE_NAME ); ?>
 				<input type="hidden" name="wpdo_take_snapshot" value="1">
 				<p>
@@ -389,7 +392,7 @@ class TMDO_Setup_Wizard {
 		</p>
 		<p class="description"><?php esc_html_e( 'Cron 會跑 7 項 Site Health 檢查；critical 警告寫入 admin notice + audit log。', '2meet-data-optimizer' ); ?></p>
 
-		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" style="margin-top: 2em;">
+		<form method="get" action="<?php echo esc_url( admin_url( 'tools.php' ) ); ?>" class="wpdo-mt-3">
 			<input type="hidden" name="page" value="wpdo-setup-wizard">
 			<input type="hidden" name="step" value="5">
 			<button class="button button-primary button-hero"><?php esc_html_e( '下一步：完成 →', '2meet-data-optimizer' ); ?></button>
@@ -412,14 +415,14 @@ class TMDO_Setup_Wizard {
 		<h2><?php esc_html_e( '🎉 完成！', '2meet-data-optimizer' ); ?></h2>
 		<p><?php esc_html_e( 'Setup wizard 已結束。下一步建議：', '2meet-data-optimizer' ); ?></p>
 
-		<ul style="list-style: disc; padding-left: 1.5em; line-height: 1.8;">
+		<ul class="wpdo-list-disc">
 			<li><a href="<?php echo esc_url( admin_url( 'tools.php?page=wp-data-optimizer&tab=entity-bridge' ) ); ?>"><?php esc_html_e( '🌉 看 Entity Bridge 健康卡片', '2meet-data-optimizer' ); ?></a> — <?php esc_html_e( 'user / post / term / comment 4 entity 即時健康+模式狀態', '2meet-data-optimizer' ); ?></li>
 			<li><a href="<?php echo esc_url( admin_url( 'tools.php?page=wp-data-optimizer&tab=migration-wizard' ) ); ?>"><?php esc_html_e( '🪄 開 User / Post 遷移精靈', '2meet-data-optimizer' ); ?></a> — <?php esc_html_e( '一鍵推進 disabled → dual_write → shadow_read → aeav_only', '2meet-data-optimizer' ); ?></li>
 			<li><a href="<?php echo esc_url( admin_url( 'tools.php?page=wp-data-optimizer&tab=classifier' ) ); ?>"><?php esc_html_e( '🔍 跑 Classifier', '2meet-data-optimizer' ); ?></a> — <?php esc_html_e( '看推薦 zone 配置', '2meet-data-optimizer' ); ?></li>
 			<li><a href="<?php echo esc_url( admin_url( 'site-health.php' ) ); ?>"><?php esc_html_e( '🏥 WP Site Health', '2meet-data-optimizer' ); ?></a> — <?php esc_html_e( '7 個 WPDO 健康檢查', '2meet-data-optimizer' ); ?></li>
 		</ul>
 
-		<p style="margin-top: 2em;">
+		<p class="wpdo-mt-3">
 			<a class="button button-primary button-hero" href="<?php echo esc_url( admin_url( 'tools.php?page=wp-data-optimizer' ) ); ?>">
 				<?php esc_html_e( '前往 WPDO 儀表板', '2meet-data-optimizer' ); ?>
 			</a>

admin/templates/comment-stress-test.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform admin UI: stress test SQL example display
 /**
  * Comment Stress Test template (v2.13.1).
  *
@@ -16,6 +15,10 @@
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform admin UI: stress test SQL example display
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -25,6 +28,8 @@ $is_running   = ( 'running' === $status_str || 'benchmarking' === $status_str );
 $current_mode  = class_exists( 'TMDO_Mode_Manager' ) ? TMDO_Mode_Manager::get( 'comment' ) : 'disabled';
 $mode_color    = 'aeav_only' === $current_mode ? '#28a745' : ( 'shadow_read' === $current_mode ? '#dba617' : '#dc3545' );
 $mode_optimal  = 'aeav_only' === $current_mode;
+$mode_text_cls = 'aeav_only' === $current_mode ? 'wpdo-text-success' : ( 'shadow_read' === $current_mode ? 'wpdo-text-amber' : 'wpdo-text-danger' );
+$mode_card_cls = $mode_optimal ? 'ok' : 'warn';
 $settings_url  = admin_url( 'tools.php?page=wp-data-optimizer&tab=settings' );
 
 global $wpdb;
@@ -37,7 +42,7 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 <div class="wpdo-comment-stress-test-tab">
 	<h2><?php esc_html_e( 'Comment Entity 壓力測試 & Benchmark', '2meet-data-optimizer' ); ?></h2>
 
-	<div style="margin:14px 0;padding:12px 14px;background:#f8d7da;color:#721c24;border-left:4px solid #dc3545;border-radius:4px;font-size:13px;line-height:1.6;">
+	<div class="wpdo-notice-error">
 		⚠️ <strong><?php esc_html_e( '此工具僅供開發 / 測試環境使用。', '2meet-data-optimizer' ); ?></strong>
 		<?php esc_html_e( '會建立大量測試 comment 並 seed 對應 hp_review 群組 keys。請勿在生產環境執行。', '2meet-data-optimizer' ); ?>
 	</div>
@@ -47,8 +52,8 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 	</p>
 
 	<!-- Diagnose snapshot -->
-	<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);margin-top:20px;">
-		<h3 style="margin-top:0;"><?php esc_html_e( '當前 Comment Entity 狀態', '2meet-data-optimizer' ); ?></h3>
+	<div class="wpdo-card wpdo-mt-3">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '當前 Comment Entity 狀態', '2meet-data-optimizer' ); ?></h3>
 		<table class="widefat striped">
 			<tr>
 				<td><?php esc_html_e( 'wp_comments', '2meet-data-optimizer' ); ?></td>
@@ -58,7 +63,7 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 			</tr>
 			<tr>
 				<td><?php esc_html_e( 'Mode', '2meet-data-optimizer' ); ?></td>
-				<td><strong style="color:<?php echo esc_attr( $mode_color ); ?>;"><?php echo esc_html( $current_mode ); ?></strong></td>
+				<td><strong class="<?php echo esc_attr( $mode_text_cls ); ?>"><?php echo esc_html( $current_mode ); ?></strong></td>
 				<td><?php esc_html_e( 'Ratio', '2meet-data-optimizer' ); ?></td>
 				<td><strong>1:<?php echo esc_html( (string) ( $total_comments > 0 ? round( $total_commentmeta / $total_comments, 2 ) : 0 ) ); ?></strong></td>
 			</tr>
@@ -70,14 +75,14 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 			</tr>
 			<tr>
 				<td colspan="2"><?php esc_html_e( 'Stress 測試 comment 數', '2meet-data-optimizer' ); ?></td>
-				<td colspan="2"><strong id="wpdo-cst-count" style="color:#dc3545;font-size:18px;"><?php echo esc_html( number_format_i18n( $test_comment_count ) ); ?></strong></td>
+				<td colspan="2"><strong id="wpdo-cst-count" class="wpdo-count-danger"><?php echo esc_html( number_format_i18n( $test_comment_count ) ); ?></strong></td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- 驗證反 EAV 優化指南 -->
-	<div class="wpdo-card" style="padding:20px;background:<?php echo $mode_optimal ? '#e8f5e9' : '#fff3cd'; ?>;border-left:4px solid <?php echo esc_attr( $mode_color ); ?>;border-radius:6px;margin-top:16px;font-size:13px;line-height:1.7;">
-		<h3 style="margin-top:0;font-size:14px;">
+	<div class="wpdo-card wpdo-mode-card wpdo-mode-card--<?php echo esc_attr( $mode_card_cls ); ?>">
+		<h3 class="wpdo-mt-0 wpdo-h3-sm">
 			<?php if ( $mode_optimal ) : ?>
 				✅ <?php esc_html_e( 'Comment Mode = aeav_only — 已具備驗證優化的條件', '2meet-data-optimizer' ); ?>
 			<?php else : ?>
@@ -86,26 +91,26 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 				printf(
 					/* translators: %s: current mode */
 					esc_html__( 'Comment Mode = %s — 此模式下壓力測試結果不會展示完整反 EAV 優化效果', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:2px 6px;border-radius:3px;">' . esc_html( $current_mode ) . '</code>'
+					'<code class="wpdo-code-white">' . esc_html( $current_mode ) . '</code>'
 				);
 				?>
 			<?php endif; ?>
 		</h3>
-		<p style="margin:8px 0 0 0;">
+		<p class="wpdo-mt-1">
 			<strong><?php esc_html_e( '想看 wp_commentmeta 真實減量？必須兩條件同時滿足：', '2meet-data-optimizer' ); ?></strong>
 		</p>
-		<ol style="margin:6px 0 8px 22px;padding:0;">
+		<ol class="wpdo-list-ol-tight">
 			<li>
 				<?php
 				printf(
 					/* translators: 1: open code, 2: close code */
 					esc_html__( 'Comment mode 設為 %1$saeav_only%2$s（前往設定 tab → Entity Bridge → Comment entity）', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:1px 5px;border-radius:3px;">',
+					'<code class="wpdo-code-white">',
 					'</code>'
 				);
 				?>
 				<?php if ( ! $mode_optimal ) : ?>
-					<a href="<?php echo esc_url( $settings_url ); ?>" class="button button-small" style="margin-left:8px;">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
+					<a href="<?php echo esc_url( $settings_url ); ?>" class="button button-small wpdo-ml-2">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
 				<?php endif; ?>
 			</li>
 			<li>
@@ -114,15 +119,15 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 		</ol>
 	</div>
 
-	<div style="display:grid;grid-template-columns:1fr 1fr;gap:20px;margin-top:20px;">
+	<div class="wpdo-grid-2col">
 
 		<!-- Left: Configure & Start -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
 
-			<table class="form-table" style="margin-top:0;">
+			<table class="form-table wpdo-mt-0">
 				<tr>
-					<th style="width:35%;"><label for="wpdo-cst-post-id"><?php esc_html_e( '目標 Post', '2meet-data-optimizer' ); ?></label></th>
+					<th class="wpdo-th-main"><label for="wpdo-cst-post-id"><?php esc_html_e( '目標 Post', '2meet-data-optimizer' ); ?></label></th>
 					<td>
 						<select id="wpdo-cst-post-id" class="regular-text">
 							<?php if ( empty( $posts ) ) : ?>
@@ -148,11 +153,11 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 				<tr>
 					<th><label><?php esc_html_e( '寫入模式', '2meet-data-optimizer' ); ?></label></th>
 					<td>
-						<label style="display:block;margin-bottom:6px;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-cst-mode" value="fast" checked />
 							<strong>Fast</strong> — <?php esc_html_e( '直接 $wpdb->insert，跳過 WP filter chain（最快，但不測 Hook Bus）', '2meet-data-optimizer' ); ?>
 						</label>
-						<label style="display:block;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-cst-mode" value="realistic" />
 							<strong>Realistic</strong> — <?php esc_html_e( '走 wp_insert_comment + update_comment_meta（較慢，模擬生產路徑 + 觸發 Hook Bus）', '2meet-data-optimizer' ); ?>
 						</label>
@@ -178,11 +183,11 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 		</div>
 
 		<!-- Right: Cleanup + Re-run benchmark -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
 			<p>
 				<?php esc_html_e( '目前 stress test comment 數：', '2meet-data-optimizer' ); ?>
-				<strong id="wpdo-cst-count-mirror" style="font-size:18px;color:#dc3545;">
+				<strong id="wpdo-cst-count-mirror" class="wpdo-count-danger">
 					<?php echo esc_html( number_format_i18n( $test_comment_count ) ); ?>
 				</strong>
 			</p>
@@ -195,7 +200,7 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 				</button>
 			</p>
 
-			<hr style="margin:18px 0;" />
+			<hr class="wpdo-hr-section" />
 
 			<p>
 				<button type="button" class="button" id="wpdo-cst-rerun-bench" <?php disabled( $is_running || 0 === $test_comment_count ); ?>>
@@ -206,46 +211,46 @@ $total_commentmeta = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->comment
 	</div>
 
 	<!-- Progress card (live) -->
-	<div id="wpdo-cst-progress-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo $is_running ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
-		<div style="margin-bottom:10px;">
-			<div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:6px;font-size:13px;">
+	<div id="wpdo-cst-progress-card" class="wpdo-card wpdo-mt-3<?php echo $is_running ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-bar-section">
+			<div class="wpdo-bar-header">
 				<span>
 					<strong id="wpdo-cst-pg-status"><?php echo esc_html( $status_str ); ?></strong>
 					· <code id="wpdo-cst-pg-post-id">post #<?php echo esc_html( (string) ( $state['post_id'] ?? '' ) ); ?></code>
 					· <span id="wpdo-cst-pg-mode"><?php echo esc_html( (string) ( $state['mode'] ?? '' ) ); ?></span> mode
 				</span>
-				<span id="wpdo-cst-pg-pct" style="font-weight:600;"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
+				<span id="wpdo-cst-pg-pct" class="wpdo-bar-pct"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
 			</div>
-			<div style="height:14px;background:#e0e0e0;border-radius:7px;overflow:hidden;">
-				<div id="wpdo-cst-pg-bar" style="height:100%;background:linear-gradient(90deg,#28a745,#20c997);width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%;transition:width .4s;"></div>
+			<div class="wpdo-bar-track">
+				<div id="wpdo-cst-pg-bar" class="wpdo-bar-fill" style="--wpdo-bar-width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%"></div>
 			</div>
 		</div>
-		<table style="width:100%;font-size:13px;margin-top:10px;border-collapse:collapse;">
+		<table class="wpdo-stats-table">
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-cst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-cst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-cst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> comments/sec</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-cst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-cst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-cst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> comments/sec</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-cst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-cst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-cst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-cst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-cst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-cst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-cst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-cst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- Benchmark report -->
-	<div id="wpdo-cst-bench-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo ! empty( $state['benchmark'] ) ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
+	<div id="wpdo-cst-bench-card" class="wpdo-card wpdo-mt-3<?php echo ! empty( $state['benchmark'] ) ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
 		<div id="wpdo-cst-bench-content"></div>
 	</div>
 

admin/templates/migration-wizard.php

@@ -10,6 +10,8 @@
  * @since 2.8.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -174,7 +176,7 @@ $failed         = 'failed' === $state;
 
 		<div class="wpdo-mw-progress-bar">
 			<div class="wpdo-mw-progress-fill" id="wpdo-mw-progress-fill"
-				style="width:<?php echo esc_attr( (string) ( $status['overall_progress'] ?? 0 ) ); ?>%"></div>
+				style="--wpdo-bar-width:<?php echo esc_attr( (string) ( $status['overall_progress'] ?? 0 ) ); ?>%"></div>
 			<span class="wpdo-mw-progress-pct" id="wpdo-mw-progress-pct"><?php echo esc_html( (string) ( $status['overall_progress'] ?? 0 ) ); ?>%</span>
 		</div>
 

admin/templates/post-migration-wizard.php

@@ -13,6 +13,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -213,7 +215,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 		?>
 	</p>
 	<div class="actions">
-		<form method="post" style="display:inline">
+		<form method="post">
 			<input type="hidden" name="wpdo_postmeta_cleanup" value="1">
 			<?php wp_nonce_field( 'wpdo_postmeta_cleanup' ); ?>
 			<button type="submit" class="button button-primary <?php echo (int) $garbage['total'] > 0 ? '' : 'disabled'; ?>"
@@ -228,7 +230,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 	<h3><?php esc_html_e( '步驟 2：把 wp_postmeta 既有資料 backfill 至 flat 表（v2.9.3）', '2meet-data-optimizer' ); ?></h3>
 	<p><?php esc_html_e( 'Idempotent — 重跑安全。每個 group 跑一次 bulk SQL pivot。', '2meet-data-optimizer' ); ?></p>
 	<div class="actions">
-		<form method="post" style="display:inline">
+		<form method="post">
 			<input type="hidden" name="wpdo_post_backfill_all" value="1">
 			<?php wp_nonce_field( 'wpdo_post_backfill_all' ); ?>
 			<button type="submit" class="button button-primary"
@@ -243,7 +245,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 	<h3><?php esc_html_e( '步驟 3：把 legacy wpdo_hot_hp_listing 抄到 flat 表（v2.9.5）', '2meet-data-optimizer' ); ?></h3>
 	<p><?php esc_html_e( '非破壞 — legacy hot 表保留作為 v3.0.0 rollback safety net。', '2meet-data-optimizer' ); ?></p>
 	<div class="actions">
-		<form method="post" style="display:inline">
+		<form method="post">
 			<input type="hidden" name="wpdo_post_cutover_legacy" value="1">
 			<?php wp_nonce_field( 'wpdo_post_cutover_legacy' ); ?>
 			<button type="submit" class="button"
@@ -258,7 +260,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 	<h3><?php esc_html_e( '步驟 4：升級 mode 至 dual_write', '2meet-data-optimizer' ); ?></h3>
 	<p><?php esc_html_e( 'wp_postmeta 與 flat 表同時寫入。讀仍走 wp_postmeta（生產 safe）。建議至少觀察 24h 後再升級下一階。', '2meet-data-optimizer' ); ?></p>
 	<div class="actions">
-		<form method="post" style="display:inline">
+		<form method="post">
 			<input type="hidden" name="wpdo_post_promote_dual_write" value="1">
 			<?php wp_nonce_field( 'wpdo_post_promote_dual_write' ); ?>
 			<button type="submit" class="button"
@@ -273,7 +275,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 	<h3><?php esc_html_e( '步驟 5：升級 mode 至 aeav_only（最終 cutover）', '2meet-data-optimizer' ); ?></h3>
 	<p><?php esc_html_e( 'flat 表成為 source-of-truth，讀寫都走 flat。完成後可 wp wpdo post-cleanup --confirm 清掉 wp_postmeta 已遷移 keys。', '2meet-data-optimizer' ); ?></p>
 	<div class="actions">
-		<form method="post" style="display:inline">
+		<form method="post">
 			<input type="hidden" name="wpdo_post_promote_aeav" value="1">
 			<?php wp_nonce_field( 'wpdo_post_promote_aeav' ); ?>
 			<button type="submit" class="button"
@@ -284,7 +286,7 @@ $wpdo_format_msg = static function ( string $code ): string {
 	</div>
 </div>
 
-<div class="wpdo-card" style="background: #f6f7f7;">
+<div class="wpdo-card wpdo-card--light">
 	<h3><?php esc_html_e( '回退路徑（rollback）', '2meet-data-optimizer' ); ?></h3>
 	<p>
 		<?php esc_html_e( '若任一步驟出問題，可下降 mode：', '2meet-data-optimizer' ); ?>

admin/templates/post-stress-test.php

@@ -16,6 +16,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -63,7 +65,7 @@ $post_type_options = array(
 <div class="wpdo-post-stress-test-tab">
 	<h2><?php esc_html_e( 'Post Entity 壓力測試 & Benchmark', '2meet-data-optimizer' ); ?></h2>
 
-	<div style="margin:14px 0;padding:12px 14px;background:#f8d7da;color:#721c24;border-left:4px solid #dc3545;border-radius:4px;font-size:13px;line-height:1.6;">
+	<div class="wpdo-notice-error">
 		⚠️ <strong><?php esc_html_e( '此工具僅供開發 / 測試環境使用。', '2meet-data-optimizer' ); ?></strong>
 		<?php esc_html_e( '會建立大量測試 post 並填滿對應 wp_postmeta + flat 表。請勿在生產環境執行。', '2meet-data-optimizer' ); ?>
 	</div>
@@ -83,10 +85,12 @@ $post_type_options = array(
 	$current_post_mode = (string) ( $diagnose['mode'] ?? 'disabled' );
 	$mode_color        = 'aeav_only' === $current_post_mode ? '#28a745' : '#dc3545';
 	$mode_optimal      = 'aeav_only' === $current_post_mode;
+	$mode_text_cls     = $mode_optimal ? 'wpdo-text-success' : 'wpdo-text-danger';
+	$mode_card_cls     = $mode_optimal ? 'ok' : 'warn';
 	$settings_tab_url  = admin_url( 'tools.php?page=wp-data-optimizer&tab=settings' );
 	?>
-	<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);margin-top:20px;">
-		<h3 style="margin-top:0;"><?php esc_html_e( '當前 Post Entity 狀態', '2meet-data-optimizer' ); ?></h3>
+	<div class="wpdo-card wpdo-mt-3">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '當前 Post Entity 狀態', '2meet-data-optimizer' ); ?></h3>
 		<table class="widefat striped">
 			<tr>
 				<td><?php esc_html_e( 'Posts', '2meet-data-optimizer' ); ?></td>
@@ -98,18 +102,18 @@ $post_type_options = array(
 				<td><?php esc_html_e( 'Ratio', '2meet-data-optimizer' ); ?></td>
 				<td><strong>1:<?php echo esc_html( (string) $diagnose['ratio'] ); ?></strong></td>
 				<td><?php esc_html_e( 'Mode', '2meet-data-optimizer' ); ?></td>
-				<td><strong style="color:<?php echo esc_attr( $mode_color ); ?>;"><?php echo esc_html( $current_post_mode ); ?></strong></td>
+				<td><strong class="<?php echo esc_attr( $mode_text_cls ); ?>"><?php echo esc_html( $current_post_mode ); ?></strong></td>
 			</tr>
 			<tr>
 				<td colspan="2"><?php esc_html_e( 'Stress 測試 post 數', '2meet-data-optimizer' ); ?></td>
-				<td colspan="2"><strong id="wpdo-pst-count" style="color:#dc3545;font-size:18px;"><?php echo esc_html( number_format_i18n( $test_post_count ) ); ?></strong></td>
+				<td colspan="2"><strong id="wpdo-pst-count" class="wpdo-count-danger"><?php echo esc_html( number_format_i18n( $test_post_count ) ); ?></strong></td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- 驗證反 EAV 優化指南 -->
-	<div class="wpdo-card" style="padding:20px;background:<?php echo $mode_optimal ? '#e8f5e9' : '#fff3cd'; ?>;border-left:4px solid <?php echo esc_attr( $mode_color ); ?>;border-radius:6px;margin-top:16px;font-size:13px;line-height:1.7;">
-		<h3 style="margin-top:0;font-size:14px;">
+	<div class="wpdo-card wpdo-mode-card wpdo-mode-card--<?php echo esc_attr( $mode_card_cls ); ?>">
+		<h3 class="wpdo-mt-0 wpdo-h3-sm">
 			<?php if ( $mode_optimal ) : ?>
 				✅ <?php esc_html_e( 'Post Mode = aeav_only — 已具備驗證優化的條件', '2meet-data-optimizer' ); ?>
 			<?php else : ?>
@@ -118,27 +122,27 @@ $post_type_options = array(
 				printf(
 					/* translators: %s: current mode */
 					esc_html__( 'Post Mode = %s — 此模式下壓力測試結果不會展示反 EAV 優化效果', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:2px 6px;border-radius:3px;">' . esc_html( $current_post_mode ) . '</code>'
+					'<code class="wpdo-code-white">' . esc_html( $current_post_mode ) . '</code>'
 				);
 				?>
 			<?php endif; ?>
 		</h3>
 
-		<p style="margin:8px 0 0 0;">
+		<p class="wpdo-mt-1">
 			<strong><?php esc_html_e( '想看 wp_postmeta 真實減量？必須同時滿足兩個條件：', '2meet-data-optimizer' ); ?></strong>
 		</p>
-		<ol style="margin:6px 0 8px 22px;padding:0;">
+		<ol class="wpdo-list-ol-tight">
 			<li>
 				<?php
 				printf(
 					/* translators: 1: settings tab anchor open, 2: settings tab anchor close */
 					esc_html__( 'Post mode 設為 %1$saeav_only%2$s（前往設定 tab → Entity Bridge → Post entity）', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:1px 5px;border-radius:3px;">',
+					'<code class="wpdo-code-white">',
 					'</code>'
 				);
 				?>
 				<?php if ( ! $mode_optimal ) : ?>
-					<a href="<?php echo esc_url( $settings_tab_url ); ?>" class="button button-small" style="margin-left:8px;">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
+					<a href="<?php echo esc_url( $settings_tab_url ); ?>" class="button button-small wpdo-ml-2">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
 				<?php endif; ?>
 			</li>
 			<li>
@@ -146,54 +150,54 @@ $post_type_options = array(
 			</li>
 		</ol>
 
-		<details style="margin-top:8px;">
-			<summary style="cursor:pointer;color:#0073aa;font-weight:600;"><?php esc_html_e( '📐 模式 × 寫入路徑 → 預期結果矩陣', '2meet-data-optimizer' ); ?></summary>
-			<table class="widefat" style="margin-top:8px;background:#fff;font-size:12px;">
+		<details class="wpdo-mt-1">
+			<summary class="wpdo-summary-toggle"><?php esc_html_e( '📐 模式 × 寫入路徑 → 預期結果矩陣', '2meet-data-optimizer' ); ?></summary>
+			<table class="widefat wpdo-mt-1 wpdo-table-inset">
 				<thead>
-					<tr style="background:#f0f0f0;">
+					<tr class="wpdo-tr-header">
 						<th><?php esc_html_e( 'Post Mode', '2meet-data-optimizer' ); ?></th>
 						<th>⚡ Fast</th>
 						<th>🐢 Realistic</th>
 					</tr>
 				</thead>
 				<tbody>
-					<tr<?php echo 'disabled' === $current_post_mode ? ' style="background:#fff8e1;"' : ''; ?>>
+					<tr class="<?php echo 'disabled' === $current_post_mode ? 'wpdo-tr-highlight' : ''; ?>">
 						<td><code>disabled</code></td>
 						<td>wp_postmeta 5 rows / flat 0 → <strong>1:5（無優化）</strong></td>
 						<td>wp_postmeta 5 / flat 0 → 1:5（無優化）</td>
 					</tr>
-					<tr<?php echo 'dual_write' === $current_post_mode ? ' style="background:#fff8e1;"' : ''; ?>>
+					<tr class="<?php echo 'dual_write' === $current_post_mode ? 'wpdo-tr-highlight' : ''; ?>">
 						<td><code>dual_write</code></td>
 						<td>wp_postmeta 5 / flat 0 → 1:5</td>
 						<td>wp_postmeta 5 + flat 1 → 1:5（有 flat 但 wp_postmeta 不減）</td>
 					</tr>
-					<tr<?php echo 'shadow_read' === $current_post_mode ? ' style="background:#fff8e1;"' : ''; ?>>
+					<tr class="<?php echo 'shadow_read' === $current_post_mode ? 'wpdo-tr-highlight' : ''; ?>">
 						<td><code>shadow_read</code></td>
 						<td>wp_postmeta 5 / flat 0 → 1:5</td>
 						<td>wp_postmeta 5 + flat 1 → 1:5（讀走 flat，寫仍雙寫）</td>
 					</tr>
-					<tr<?php echo 'aeav_only' === $current_post_mode ? ' style="background:#e8f5e9;font-weight:600;"' : ''; ?>>
+					<tr class="<?php echo 'aeav_only' === $current_post_mode ? 'wpdo-tr-success' : ''; ?>">
 						<td><code>aeav_only</code></td>
 						<td>wp_postmeta 5（直 SQL 繞過 Hook Bus）/ flat 0 → 1:5 ⚠️</td>
 						<td>wp_postmeta <strong>0</strong> / flat 1 → <strong>0:1（完全優化）</strong> ✅</td>
 					</tr>
 				</tbody>
 			</table>
-			<p class="description" style="margin-top:6px;">
+			<p class="description wpdo-mt-1">
 				<?php esc_html_e( '範例以 nav_menu_item（5 keys/post）為基準。Fast 模式直接 $wpdb->insert，故意繞過 Hook Bus → 即使 mode=aeav_only 也會寫滿 wp_postmeta（用途：快速灌 fixture 給 Query Router benchmark）。驗證反 EAV 優化效果一律用 Realistic。', '2meet-data-optimizer' ); ?>
 			</p>
 		</details>
 	</div>
 
-	<div style="display:grid;grid-template-columns:1fr 1fr;gap:20px;margin-top:20px;">
+	<div class="wpdo-grid-2col">
 
 		<!-- Left: Configure & Start -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
 
-			<table class="form-table" style="margin-top:0;">
+			<table class="form-table wpdo-mt-0">
 				<tr>
-					<th style="width:35%;"><label for="wpdo-pst-post-type"><?php esc_html_e( 'Post Type', '2meet-data-optimizer' ); ?></label></th>
+					<th class="wpdo-th-main"><label for="wpdo-pst-post-type"><?php esc_html_e( 'Post Type', '2meet-data-optimizer' ); ?></label></th>
 					<td>
 						<select id="wpdo-pst-post-type" class="regular-text">
 							<?php foreach ( $post_type_options as $pt => $info ) : ?>
@@ -226,11 +230,11 @@ $post_type_options = array(
 				<tr>
 					<th><label><?php esc_html_e( '寫入模式', '2meet-data-optimizer' ); ?></label></th>
 					<td>
-						<label style="display:block;margin-bottom:6px;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-pst-mode" value="fast" checked />
 							<strong>Fast</strong> — <?php esc_html_e( '直接 $wpdb->insert，跳過 WP filter chain（最快，但不測 Hook Bus）', '2meet-data-optimizer' ); ?>
 						</label>
-						<label style="display:block;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-pst-mode" value="realistic" />
 							<strong>Realistic</strong> — <?php esc_html_e( '走 wp_insert_post + update_post_meta（較慢，模擬生產路徑 + 觸發 Hook Bus → mode=dual_write+ 時 flat 表自動填入）', '2meet-data-optimizer' ); ?>
 						</label>
@@ -256,11 +260,11 @@ $post_type_options = array(
 		</div>
 
 		<!-- Right: Cleanup + Re-run benchmark -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
 			<p>
 				<?php esc_html_e( '目前 stress test post 數：', '2meet-data-optimizer' ); ?>
-				<strong id="wpdo-pst-count-mirror" style="font-size:18px;color:#dc3545;">
+				<strong id="wpdo-pst-count-mirror" class="wpdo-count-danger">
 					<?php echo esc_html( number_format_i18n( $test_post_count ) ); ?>
 				</strong>
 			</p>
@@ -273,7 +277,7 @@ $post_type_options = array(
 				</button>
 			</p>
 
-			<hr style="margin:18px 0;" />
+			<hr class="wpdo-hr-section" />
 
 			<p>
 				<button type="button" class="button" id="wpdo-pst-rerun-bench" <?php disabled( $is_running || 0 === $test_post_count ); ?>>
@@ -287,52 +291,52 @@ $post_type_options = array(
 	</div>
 
 	<!-- Progress section (live) -->
-	<div id="wpdo-pst-progress-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo $is_running ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
-		<div style="margin-bottom:10px;">
-			<div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:6px;font-size:13px;">
+	<div id="wpdo-pst-progress-card" class="wpdo-card wpdo-mt-3<?php echo $is_running ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-bar-section">
+			<div class="wpdo-bar-header">
 				<span>
 					<strong id="wpdo-pst-pg-status"><?php echo esc_html( $wpdo_pst_stat ); ?></strong>
 					· <code id="wpdo-pst-pg-post-type"><?php echo esc_html( (string) ( $state['post_type'] ?? '' ) ); ?></code>
 					· <span id="wpdo-pst-pg-mode"><?php echo esc_html( (string) ( $state['mode'] ?? '' ) ); ?></span> mode
 				</span>
-				<span id="wpdo-pst-pg-pct" style="font-weight:600;"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
+				<span id="wpdo-pst-pg-pct" class="wpdo-bar-pct"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
 			</div>
-			<div style="height:14px;background:#e0e0e0;border-radius:7px;overflow:hidden;">
-				<div id="wpdo-pst-pg-bar" style="height:100%;background:linear-gradient(90deg,#28a745,#20c997);width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%;transition:width .4s;"></div>
+			<div class="wpdo-bar-track">
+				<div id="wpdo-pst-pg-bar" class="wpdo-bar-fill" style="--wpdo-bar-width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%"></div>
 			</div>
 		</div>
-		<table style="width:100%;font-size:13px;margin-top:10px;border-collapse:collapse;">
+		<table class="wpdo-stats-table">
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-pst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-pst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-pst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> posts/sec</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-pst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-pst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-pst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> posts/sec</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-pst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-pst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-pst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-pst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-pst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-pst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-pst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-pst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- Benchmark report -->
-	<div id="wpdo-pst-bench-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo ! empty( $state['benchmark'] ) ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
+	<div id="wpdo-pst-bench-card" class="wpdo-card wpdo-mt-3<?php echo ! empty( $state['benchmark'] ) ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
 		<div id="wpdo-pst-bench-content"></div>
 	</div>
 
 	<!-- 7-group seed map info -->
-	<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);margin-top:20px;">
-		<h3 style="margin-top:0;"><?php esc_html_e( '4. TMDO_Post_Stress_Tester seed map（7 個 post_type）', '2meet-data-optimizer' ); ?></h3>
+	<div class="wpdo-card wpdo-mt-3">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '4. TMDO_Post_Stress_Tester seed map（7 個 post_type）', '2meet-data-optimizer' ); ?></h3>
 		<p class="description">
 			<?php esc_html_e( '每個 stress post 自動 seed 對應 group 的 canonical meta keys（v2.9.1 entity registry 定義）。', '2meet-data-optimizer' ); ?>
 		</p>

admin/templates/term-stress-test.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform admin UI: stress test SQL example display
 /**
  * Term Stress Test template (v2.13.0).
  *
@@ -16,6 +15,10 @@
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform admin UI: stress test SQL example display
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -25,6 +28,8 @@ $is_running   = ( 'running' === $status_str || 'benchmarking' === $status_str );
 $current_mode  = class_exists( 'TMDO_Mode_Manager' ) ? TMDO_Mode_Manager::get( 'term' ) : 'disabled';
 $mode_color    = 'aeav_only' === $current_mode ? '#28a745' : ( 'shadow_read' === $current_mode ? '#dba617' : '#dc3545' );
 $mode_optimal  = 'aeav_only' === $current_mode;
+$mode_text_cls = 'aeav_only' === $current_mode ? 'wpdo-text-success' : ( 'shadow_read' === $current_mode ? 'wpdo-text-amber' : 'wpdo-text-danger' );
+$mode_card_cls = $mode_optimal ? 'ok' : 'warn';
 $settings_url  = admin_url( 'tools.php?page=wp-data-optimizer&tab=settings' );
 
 global $wpdb;
@@ -37,7 +42,7 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 <div class="wpdo-term-stress-test-tab">
 	<h2><?php esc_html_e( 'Term Entity 壓力測試 & Benchmark', '2meet-data-optimizer' ); ?></h2>
 
-	<div style="margin:14px 0;padding:12px 14px;background:#f8d7da;color:#721c24;border-left:4px solid #dc3545;border-radius:4px;font-size:13px;line-height:1.6;">
+	<div class="wpdo-notice-error">
 		⚠️ <strong><?php esc_html_e( '此工具僅供開發 / 測試環境使用。', '2meet-data-optimizer' ); ?></strong>
 		<?php esc_html_e( '會建立大量測試 term 並 seed 對應 hp_taxonomy 群組 keys。請勿在生產環境執行。', '2meet-data-optimizer' ); ?>
 	</div>
@@ -47,8 +52,8 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 	</p>
 
 	<!-- Diagnose snapshot -->
-	<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);margin-top:20px;">
-		<h3 style="margin-top:0;"><?php esc_html_e( '當前 Term Entity 狀態', '2meet-data-optimizer' ); ?></h3>
+	<div class="wpdo-card wpdo-mt-3">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '當前 Term Entity 狀態', '2meet-data-optimizer' ); ?></h3>
 		<table class="widefat striped">
 			<tr>
 				<td><?php esc_html_e( 'wp_terms', '2meet-data-optimizer' ); ?></td>
@@ -58,7 +63,7 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 			</tr>
 			<tr>
 				<td><?php esc_html_e( 'Mode', '2meet-data-optimizer' ); ?></td>
-				<td><strong style="color:<?php echo esc_attr( $mode_color ); ?>;"><?php echo esc_html( $current_mode ); ?></strong></td>
+				<td><strong class="<?php echo esc_attr( $mode_text_cls ); ?>"><?php echo esc_html( $current_mode ); ?></strong></td>
 				<td><?php esc_html_e( 'Ratio', '2meet-data-optimizer' ); ?></td>
 				<td><strong>1:<?php echo esc_html( (string) ( $total_terms > 0 ? round( $total_termmeta / $total_terms, 2 ) : 0 ) ); ?></strong></td>
 			</tr>
@@ -70,14 +75,14 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 			</tr>
 			<tr>
 				<td colspan="2"><?php esc_html_e( 'Stress 測試 term 數', '2meet-data-optimizer' ); ?></td>
-				<td colspan="2"><strong id="wpdo-tst-count" style="color:#dc3545;font-size:18px;"><?php echo esc_html( number_format_i18n( $test_term_count ) ); ?></strong></td>
+				<td colspan="2"><strong id="wpdo-tst-count" class="wpdo-count-danger"><?php echo esc_html( number_format_i18n( $test_term_count ) ); ?></strong></td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- 驗證反 EAV 優化指南 -->
-	<div class="wpdo-card" style="padding:20px;background:<?php echo $mode_optimal ? '#e8f5e9' : '#fff3cd'; ?>;border-left:4px solid <?php echo esc_attr( $mode_color ); ?>;border-radius:6px;margin-top:16px;font-size:13px;line-height:1.7;">
-		<h3 style="margin-top:0;font-size:14px;">
+	<div class="wpdo-card wpdo-mode-card wpdo-mode-card--<?php echo esc_attr( $mode_card_cls ); ?>">
+		<h3 class="wpdo-mt-0 wpdo-h3-sm">
 			<?php if ( $mode_optimal ) : ?>
 				✅ <?php esc_html_e( 'Term Mode = aeav_only — 已具備驗證優化的條件', '2meet-data-optimizer' ); ?>
 			<?php else : ?>
@@ -86,26 +91,26 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 				printf(
 					/* translators: %s: current mode */
 					esc_html__( 'Term Mode = %s — 此模式下壓力測試結果不會展示完整反 EAV 優化效果', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:2px 6px;border-radius:3px;">' . esc_html( $current_mode ) . '</code>'
+					'<code class="wpdo-code-white">' . esc_html( $current_mode ) . '</code>'
 				);
 				?>
 			<?php endif; ?>
 		</h3>
-		<p style="margin:8px 0 0 0;">
+		<p class="wpdo-mt-1">
 			<strong><?php esc_html_e( '想看 wp_termmeta 真實減量？必須兩條件同時滿足：', '2meet-data-optimizer' ); ?></strong>
 		</p>
-		<ol style="margin:6px 0 8px 22px;padding:0;">
+		<ol class="wpdo-list-ol-tight">
 			<li>
 				<?php
 				printf(
 					/* translators: 1: open code, 2: close code */
 					esc_html__( 'Term mode 設為 %1$saeav_only%2$s（前往設定 tab → Entity Bridge → Term entity）', '2meet-data-optimizer' ),
-					'<code style="background:#fff;padding:1px 5px;border-radius:3px;">',
+					'<code class="wpdo-code-white">',
 					'</code>'
 				);
 				?>
 				<?php if ( ! $mode_optimal ) : ?>
-					<a href="<?php echo esc_url( $settings_url ); ?>" class="button button-small" style="margin-left:8px;">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
+					<a href="<?php echo esc_url( $settings_url ); ?>" class="button button-small wpdo-ml-2">→ <?php esc_html_e( '前往設定', '2meet-data-optimizer' ); ?></a>
 				<?php endif; ?>
 			</li>
 			<li>
@@ -114,15 +119,15 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 		</ol>
 	</div>
 
-	<div style="display:grid;grid-template-columns:1fr 1fr;gap:20px;margin-top:20px;">
+	<div class="wpdo-grid-2col">
 
 		<!-- Left: Configure & Start -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '1. 設定並啟動測試', '2meet-data-optimizer' ); ?></h3>
 
-			<table class="form-table" style="margin-top:0;">
+			<table class="form-table wpdo-mt-0">
 				<tr>
-					<th style="width:35%;"><label for="wpdo-tst-taxonomy"><?php esc_html_e( 'Taxonomy', '2meet-data-optimizer' ); ?></label></th>
+					<th class="wpdo-th-main"><label for="wpdo-tst-taxonomy"><?php esc_html_e( 'Taxonomy', '2meet-data-optimizer' ); ?></label></th>
 					<td>
 						<select id="wpdo-tst-taxonomy" class="regular-text">
 							<?php foreach ( $taxonomies as $slug => $label ) : ?>
@@ -144,11 +149,11 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 				<tr>
 					<th><label><?php esc_html_e( '寫入模式', '2meet-data-optimizer' ); ?></label></th>
 					<td>
-						<label style="display:block;margin-bottom:6px;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-tst-mode" value="fast" checked />
 							<strong>Fast</strong> — <?php esc_html_e( '直接 $wpdb->insert，跳過 WP filter chain（最快，但不測 Hook Bus）', '2meet-data-optimizer' ); ?>
 						</label>
-						<label style="display:block;">
+						<label class="wpdo-label-block">
 							<input type="radio" name="wpdo-tst-mode" value="realistic" />
 							<strong>Realistic</strong> — <?php esc_html_e( '走 wp_insert_term + update_term_meta（較慢，模擬生產路徑 + 觸發 Hook Bus）', '2meet-data-optimizer' ); ?>
 						</label>
@@ -174,11 +179,11 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 		</div>
 
 		<!-- Right: Cleanup + Re-run benchmark -->
-		<div class="wpdo-card" style="padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);">
-			<h3 style="margin-top:0;"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-card">
+			<h3 class="wpdo-mt-0"><?php esc_html_e( '清除測試資料', '2meet-data-optimizer' ); ?></h3>
 			<p>
 				<?php esc_html_e( '目前 stress test term 數：', '2meet-data-optimizer' ); ?>
-				<strong id="wpdo-tst-count-mirror" style="font-size:18px;color:#dc3545;">
+				<strong id="wpdo-tst-count-mirror" class="wpdo-count-danger">
 					<?php echo esc_html( number_format_i18n( $test_term_count ) ); ?>
 				</strong>
 			</p>
@@ -191,7 +196,7 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 				</button>
 			</p>
 
-			<hr style="margin:18px 0;" />
+			<hr class="wpdo-hr-section" />
 
 			<p>
 				<button type="button" class="button" id="wpdo-tst-rerun-bench" <?php disabled( $is_running || 0 === $test_term_count ); ?>>
@@ -202,46 +207,46 @@ $total_termmeta   = (int) $wpdb->get_var( "SELECT COUNT(*) FROM {$wpdb->termmeta
 	</div>
 
 	<!-- Progress card (live) -->
-	<div id="wpdo-tst-progress-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo $is_running ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
-		<div style="margin-bottom:10px;">
-			<div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:6px;font-size:13px;">
+	<div id="wpdo-tst-progress-card" class="wpdo-card wpdo-mt-3<?php echo $is_running ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '2. 即時進度', '2meet-data-optimizer' ); ?></h3>
+		<div class="wpdo-bar-section">
+			<div class="wpdo-bar-header">
 				<span>
 					<strong id="wpdo-tst-pg-status"><?php echo esc_html( $status_str ); ?></strong>
 					· <code id="wpdo-tst-pg-taxonomy"><?php echo esc_html( (string) ( $state['taxonomy'] ?? '' ) ); ?></code>
 					· <span id="wpdo-tst-pg-mode"><?php echo esc_html( (string) ( $state['mode'] ?? '' ) ); ?></span> mode
 				</span>
-				<span id="wpdo-tst-pg-pct" style="font-weight:600;"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
+				<span id="wpdo-tst-pg-pct" class="wpdo-bar-pct"><?php echo esc_html( (string) ( $state['pct'] ?? 0 ) ); ?>%</span>
 			</div>
-			<div style="height:14px;background:#e0e0e0;border-radius:7px;overflow:hidden;">
-				<div id="wpdo-tst-pg-bar" style="height:100%;background:linear-gradient(90deg,#28a745,#20c997);width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%;transition:width .4s;"></div>
+			<div class="wpdo-bar-track">
+				<div id="wpdo-tst-pg-bar" class="wpdo-bar-fill" style="--wpdo-bar-width:<?php echo esc_attr( (string) ( $state['pct'] ?? 0 ) ); ?>%"></div>
 			</div>
 		</div>
-		<table style="width:100%;font-size:13px;margin-top:10px;border-collapse:collapse;">
+		<table class="wpdo-stats-table">
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-tst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-tst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;font-weight:600;"><span id="wpdo-tst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> terms/sec</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已建立', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-tst-pg-processed"><?php echo esc_html( (string) ( $state['processed'] ?? 0 ) ); ?></span> / <span id="wpdo-tst-pg-target"><?php echo esc_html( (string) ( $state['target'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '速率', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td-val"><span id="wpdo-tst-pg-rate"><?php echo esc_html( (string) ( $state['rate_per_sec'] ?? 0 ) ); ?></span> terms/sec</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-tst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-tst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '已耗時', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-tst-pg-elapsed"><?php echo esc_html( (string) ( $state['elapsed_sec'] ?? 0 ) ); ?></span> 秒</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '預估剩餘', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-tst-pg-eta"><?php echo esc_html( (string) ( $state['eta_sec'] ?? 0 ) ); ?></span> 秒</td>
 			</tr>
 			<tr>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-tst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
-				<td style="padding:6px;color:#666;"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
-				<td style="padding:6px;"><span id="wpdo-tst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
+				<td class="wpdo-td-muted"><?php esc_html_e( '完成批次', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-tst-pg-batches"><?php echo esc_html( (string) ( $state['batches_done'] ?? 0 ) ); ?></span></td>
+				<td class="wpdo-td-muted"><?php esc_html_e( 'PHP Peak Mem', '2meet-data-optimizer' ); ?></td>
+				<td class="wpdo-td"><span id="wpdo-tst-pg-mem"><?php echo esc_html( (string) round( ( (int) ( $state['peak_memory'] ?? 0 ) ) / 1048576, 1 ) ); ?></span> MB</td>
 			</tr>
 		</table>
 	</div>
 
 	<!-- Benchmark report -->
-	<div id="wpdo-tst-bench-card" class="wpdo-card" style="margin-top:20px;padding:20px;background:#fff;border-radius:8px;box-shadow:0 1px 4px rgba(0,0,0,.08);<?php echo ! empty( $state['benchmark'] ) ? '' : 'display:none;'; ?>">
-		<h3 style="margin-top:0;"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
+	<div id="wpdo-tst-bench-card" class="wpdo-card wpdo-mt-3<?php echo ! empty( $state['benchmark'] ) ? '' : ' wpdo-hidden'; ?>">
+		<h3 class="wpdo-mt-0"><?php esc_html_e( '3. Benchmark 報告', '2meet-data-optimizer' ); ?></h3>
 		<div id="wpdo-tst-bench-content"></div>
 	</div>
 

cli/class-tmdo-cli-member.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
 /**
  * TMDO_CLI_Member — Member flat-table CLI subcommands.
  *
@@ -17,6 +16,10 @@
  * @since   2.5.5
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

cli/class-tmdo-cli-post.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
 /**
  * TMDO_CLI_Post — Post entity CLI subcommands (v2.9.0+).
  *
@@ -16,6 +15,10 @@
  * @since   2.9.0
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -256,6 +259,94 @@ class TMDO_CLI_Post {
 		);
 	}
 
+	// ── post-reconcile-groups ─────────────────────────────────────────────────
+
+	/**
+	 * Move post values written under legacy routing into their post type's
+	 * group table, then switch on post_type-scoped routing.
+	 *
+	 * Needed once on sites that already hold post flat rows (the installer
+	 * leaves tmdo_post_scoped_routing off there). Resumable: an interrupted
+	 * run continues from its cursor.
+	 *
+	 * ## OPTIONS
+	 *
+	 * [--dry-run]
+	 * : Count the values that would be copied / overwritten; write nothing.
+	 *
+	 * [--batch=<n>]
+	 * : Rows per batch. Default 500.
+	 *
+	 * ## EXAMPLES
+	 *
+	 *     wp tmdo post-reconcile-groups --dry-run
+	 *     wp tmdo post-reconcile-groups
+	 *
+	 * @param array<int, string>    $args       Positional arguments (unused).
+	 * @param array<string, string> $assoc_args Named arguments.
+	 */
+	public function post_reconcile_groups( $args, $assoc_args ): void {
+		$dry_run = isset( $assoc_args['dry-run'] );
+		$report  = TMDO_Post_Group_Reconciler::run( $dry_run, (int) ( $assoc_args['batch'] ?? 500 ) );
+
+		if ( empty( $report['moves'] ) ) {
+			WP_CLI::log( 'No shared post keys to move.' );
+		}
+		foreach ( $report['moves'] as $m ) {
+			WP_CLI::log( sprintf( '%s → %s  %s: %d value(s)%s', $m['source'], $m['target'], $m['key'], $m['copied'], $dry_run ? sprintf( ', %d would overwrite a different value', $m['overwritten'] ) : '' ) );
+		}
+
+		if ( $dry_run ) {
+			WP_CLI::success( '[dry-run] Nothing written. Re-run without --dry-run to copy and switch on scoped routing.' );
+			return;
+		}
+		WP_CLI::success( 'Post groups reconciled; tmdo_post_scoped_routing is on.' );
+	}
+
+	// ── post-status-sync ──────────────────────────────────────────────────────
+
+	/**
+	 * Add post_status / post_date copies (and their index) to every post
+	 * group table and fill them from wp_posts.
+	 *
+	 * Existing tables only get the columns here, never in a web request:
+	 * ALTER on a large table can take seconds. Afterwards status changes keep
+	 * the copies current. Re-run after bulk writes that bypass WordPress
+	 * (e.g. post-reconcile-groups, post migrations).
+	 *
+	 * ## OPTIONS
+	 *
+	 * [--dry-run]
+	 * : Count rows whose copies are missing or stale; change nothing.
+	 *
+	 * [--batch=<n>]
+	 * : Rows per UPDATE. Default 1000.
+	 *
+	 * ## EXAMPLES
+	 *
+	 *     wp tmdo post-status-sync --dry-run
+	 *     wp tmdo post-status-sync
+	 *
+	 * @param array<int, string>    $args       Positional arguments (unused).
+	 * @param array<string, string> $assoc_args Named arguments.
+	 */
+	public function post_status_sync( $args, $assoc_args ): void {
+		$dry_run = isset( $assoc_args['dry-run'] );
+		$report  = TMDO_Post_Status_Sync::run( $dry_run, (int) ( $assoc_args['batch'] ?? 1000 ) );
+
+		if ( empty( $report ) ) {
+			WP_CLI::log( 'No post group tables.' );
+		}
+		foreach ( $report as $group => $r ) {
+			WP_CLI::log( sprintf( '%s: %d row(s), %d missing or stale%s', $group, $r['rows'], $r['mismatched'], $dry_run ? '' : sprintf( ' → %s', TMDO_Post_Status_Sync::state( $group ) ) ) );
+		}
+		if ( $dry_run ) {
+			WP_CLI::success( '[dry-run] Nothing changed.' );
+			return;
+		}
+		WP_CLI::success( 'post_status / post_date copies are in sync.' );
+	}
+
 	// ── post-cleanup (v2.9.3) ─────────────────────────────────────────────────
 
 	/**
@@ -813,23 +904,7 @@ class TMDO_CLI_Post {
 	 * @return string|null
 	 */
 	private static function group_post_type_for_cli( string $group ): ?string {
-		switch ( $group ) {
-			case 'attachment':
-				return 'attachment';
-			case 'wc_product':
-				return 'product';
-			case 'hp_listing_core':
-				return 'hp_listing';
-			case 'hp_request_core':
-				return 'hp_request';
-			case 'hp_vendor_core':
-				return 'hp_vendor';
-			case 'nav_menu_item':
-				return 'nav_menu_item';
-			case 'wp_core':
-			default:
-				return null;
-		}
+		return TMDO_Post_Fields::post_type_for_group( $group );
 	}
 }
 
@@ -850,3 +925,6 @@ WP_CLI::add_command( 'wpdo post-benchmark', array( 'TMDO_CLI_Post', 'post_benchm
 WP_CLI::add_command( 'tmdo post-benchmark', array( 'TMDO_CLI_Post', 'post_benchmark' ) );
 WP_CLI::add_command( 'wpdo post-shadow-report', array( 'TMDO_CLI_Post', 'post_shadow_report' ) );
 WP_CLI::add_command( 'tmdo post-shadow-report', array( 'TMDO_CLI_Post', 'post_shadow_report' ) );
+WP_CLI::add_command( 'wpdo post-reconcile-groups', array( new TMDO_CLI_Post(), 'post_reconcile_groups' ) );
+WP_CLI::add_command( 'tmdo post-reconcile-groups', array( new TMDO_CLI_Post(), 'post_reconcile_groups' ) );
+WP_CLI::add_command( 'tmdo post-status-sync', array( new TMDO_CLI_Post(), 'post_status_sync' ) );

cli/class-tmdo-cli-term-comment.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
 /**
  * TMDO_CLI_Term_Comment — Term + Comment entity CLI subcommands (v2.12.0+).
  *
@@ -19,6 +18,10 @@
  * @since   2.12.0
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform CLI inspector tool: raw meta queries needed for diagnostics
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -426,7 +429,7 @@ class TMDO_CLI_Term_Comment {
 		WP_CLI::log( sprintf( 'Mode:                 %s', $term_mode ) );
 		WP_CLI::log( sprintf( 'wp_terms:             %s', number_format_i18n( $terms_count ) ) );
 		WP_CLI::log( sprintf( 'wp_termmeta:          %s (1:%s)', number_format_i18n( $termmeta_count ), $terms_count > 0 ? round( $termmeta_count / $terms_count, 2 ) : 'n/a' ) );
-		self::print_flat_row( $wpdb->prefix . 'wpdo_term_hp_taxonomy', 'wpdo_term_hp_taxonomy' );
+		self::print_group_rows( 'term' );
 		self::print_flat_row( $wpdb->prefix . 'wpdo_term_misc', 'wpdo_term_misc' );
 
 		WP_CLI::log( '' );
@@ -434,7 +437,7 @@ class TMDO_CLI_Term_Comment {
 		WP_CLI::log( sprintf( 'Mode:                 %s', $comment_mode ) );
 		WP_CLI::log( sprintf( 'wp_comments:          %s', number_format_i18n( $comments_count ) ) );
 		WP_CLI::log( sprintf( 'wp_commentmeta:       %s (1:%s)', number_format_i18n( $commentmeta_count ), $comments_count > 0 ? round( $commentmeta_count / $comments_count, 2 ) : 'n/a' ) );
-		self::print_flat_row( $wpdb->prefix . 'wpdo_comment_hp_review', 'wpdo_comment_hp_review' );
+		self::print_group_rows( 'comment' );
 		self::print_flat_row( $wpdb->prefix . 'wpdo_comment_misc', 'wpdo_comment_misc' );
 
 		WP_CLI::log( '' );
@@ -467,6 +470,21 @@ class TMDO_CLI_Term_Comment {
 		return 'Both entities at disabled. Promote to dual_write first to enable Hook Bus interception.';
 	}
 
+	/**
+	 * Print the row count of every registered group table of an entity.
+	 *
+	 * @param string $entity_type 'term' or 'comment'.
+	 * @return void
+	 */
+	private static function print_group_rows( string $entity_type ): void {
+		foreach ( TMDO_Term_Comment_Backfill::registered_groups() as $group => $type ) {
+			if ( $type === $entity_type ) {
+				$table = TMDO_Schema_Manager::get_table_name( $entity_type, $group );
+				self::print_flat_row( $table, TMDO_TABLE_PREFIX . $entity_type . '_' . $group );
+			}
+		}
+	}
+
 	/**
 	 * Print a flat table's row count (or "(missing)" when not present).
 	 *
@@ -644,7 +662,8 @@ class TMDO_CLI_Term_Comment {
 			);
 		}
 
-		$valid_groups = array( 'all', 'hp_taxonomy', 'hp_review' );
+		$registered   = TMDO_Term_Comment_Backfill::registered_groups();
+		$valid_groups = array_merge( array( 'all' ), array_keys( $registered ) );
 		if ( ! in_array( $group, $valid_groups, true ) ) {
 			WP_CLI::error( 'Invalid --group. Choose: ' . implode( ', ', $valid_groups ) );
 		}
@@ -653,8 +672,7 @@ class TMDO_CLI_Term_Comment {
 		if ( 'all' === $group ) {
 			$results = TMDO_Term_Comment_Backfill::backfill_all( $dry_run );
 		} else {
-			$entity_type = 'hp_review' === $group ? 'comment' : 'term';
-			$results     = array( $group => TMDO_Term_Comment_Backfill::backfill_group( $entity_type, $group, $dry_run ) );
+			$results = array( $group => TMDO_Term_Comment_Backfill::backfill_group( $registered[ $group ], $group, $dry_run ) );
 		}
 
 		// Render table.

cli/class-tmdo-cli-v2.php

@@ -19,6 +19,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -150,6 +152,71 @@ class TMDO_CLI_V2 {
 		WP_CLI::success( "Hook Bus: {$state}" );
 	}
 
+	/**
+	 * Write an entity's flat-table values back to native meta — the way out of
+	 * aeav_only. Resumable; re-run after an interruption.
+	 *
+	 * ## OPTIONS
+	 *
+	 * <entity>
+	 * : post | user | term | comment
+	 *
+	 * [--dry-run]
+	 * : Count the flat rows per group; write nothing.
+	 *
+	 * [--batch=<n>]
+	 * : Rows per batch. Default 500.
+	 *
+	 * [--demote]
+	 * : After a complete run, switch the entity to dual_write (both copies kept in step).
+	 *
+	 * [--group=<group>]
+	 * : Only this group.
+	 *
+	 * [--retire]
+	 * : With --group, after the write-back: forget the group (registry_meta row)
+	 * and rename its flat table to <table>_retired_<Ymd>. Refused while a plugin
+	 * still registers the group or native meta differs from the flat table.
+	 *
+	 * ## EXAMPLES
+	 *
+	 *     wp tmdo bridge-restore-native user --dry-run
+	 *     wp tmdo bridge-restore-native user --demote
+	 *     wp tmdo bridge-restore-native user --group=sso --retire
+	 *
+	 * @param array<int, string>    $args       Positional arguments.
+	 * @param array<string, string> $assoc_args Named arguments.
+	 */
+	public function bridge_restore_native( $args, $assoc_args ): void {
+		$entity = (string) ( $args[0] ?? '' );
+		if ( ! in_array( $entity, TMDO_Entity_Registry::VALID_ENTITY_TYPES, true ) ) {
+			WP_CLI::error( 'Usage: wp tmdo bridge-restore-native <post|user|term|comment> [--dry-run] [--batch=<n>] [--demote] [--group=<group> [--retire]]' );
+		}
+		$dry_run = isset( $assoc_args['dry-run'] );
+		$group   = sanitize_key( (string) ( $assoc_args['group'] ?? '' ) );
+		if ( isset( $assoc_args['retire'] ) && '' === $group ) {
+			WP_CLI::error( '--retire needs --group=<group>.' );
+		}
+		$report = TMDO_Native_Restorer::run( $entity, $dry_run, (int) ( $assoc_args['batch'] ?? 500 ), isset( $assoc_args['demote'] ), $group );
+
+		foreach ( $report['groups'] as $group => $g ) {
+			WP_CLI::log( sprintf( '%s/%s: %d row(s)%s', $entity, $group, $g['rows'], $dry_run ? '' : sprintf( ', %d native value(s) written', $g['written'] ) ) );
+		}
+		if ( $dry_run ) {
+			WP_CLI::success( '[dry-run] Nothing written.' );
+			return;
+		}
+		if ( isset( $assoc_args['retire'] ) ) {
+			$retired = TMDO_Native_Restorer::retire( $entity, $group );
+			if ( 'retired' !== $retired['status'] ) {
+				WP_CLI::error( sprintf( 'Not retired (%s%s). Written values stay in native meta.', $retired['status'], $retired['mismatches'] ? ", {$retired['mismatches']} value(s) differ" : '' ) );
+			}
+			WP_CLI::success( "{$entity}/{$group} retired; flat table kept as {$retired['archived_table']}." );
+			return;
+		}
+		WP_CLI::success( $report['demoted'] ? "Restored; {$entity} is now dual_write." : 'Restored. Demote the entity to dual_write (admin Entity Bridge tab) before its next write, or re-run with --demote.' );
+	}
+
 	/**
 	 * Audit per-module state + shadow_read flags.
 	 *
@@ -782,6 +849,8 @@ WP_CLI::add_command( 'wpdo bridge-status', array( 'TMDO_CLI_V2', 'bridge_status'
 WP_CLI::add_command( 'tmdo bridge-status', array( 'TMDO_CLI_V2', 'bridge_status' ) );
 WP_CLI::add_command( 'wpdo bridge-set', array( 'TMDO_CLI_V2', 'bridge_set' ) );
 WP_CLI::add_command( 'tmdo bridge-set', array( 'TMDO_CLI_V2', 'bridge_set' ) );
+WP_CLI::add_command( 'wpdo bridge-restore-native', array( new TMDO_CLI_V2(), 'bridge_restore_native' ) );
+WP_CLI::add_command( 'tmdo bridge-restore-native', array( new TMDO_CLI_V2(), 'bridge_restore_native' ) );
 WP_CLI::add_command( 'wpdo mode-audit', array( 'TMDO_CLI_V2', 'mode_audit' ) );
 WP_CLI::add_command( 'tmdo mode-audit', array( 'TMDO_CLI_V2', 'mode_audit' ) );
 WP_CLI::add_command( 'wpdo mode-set', array( 'TMDO_CLI_V2', 'mode_set' ) );

cli/class-tmdo-cli.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -40,7 +42,6 @@ class TMDO_CLI {
 
 		$compat = TMDO_Compatibility::check();
 		WP_CLI::log( 'HivePress:       ' . ( $compat['hivepress'] ? 'Active' : 'Not found' ) );
-		WP_CLI::log( 'HP Custom Tables: ' . self::format_hpct_status( $compat ) );
 		WP_CLI::log( 'Object Cache:    ' . ( wp_using_ext_object_cache() ? 'External' : 'Built-in' ) );
 		WP_CLI::log( '' );
 
@@ -55,10 +56,10 @@ class TMDO_CLI {
 
 		WP_CLI::log( 'Module States:' );
 
-		$hpct_flags = TMDO_Feature_Flags::hpct_modules();
-		if ( ! empty( $hpct_flags ) ) {
-			WP_CLI::log( '  [HPCT Modules]' );
-			foreach ( $hpct_flags as $module => $state ) {
+		$addon_flags = TMDO_Feature_Flags::addon_modules();
+		if ( ! empty( $addon_flags ) ) {
+			WP_CLI::log( '  [AddOn Modules]' );
+			foreach ( $addon_flags as $module => $state ) {
 				WP_CLI::log( "    {$module}: {$state}" );
 			}
 		}
@@ -328,6 +329,40 @@ class TMDO_CLI {
 			WP_CLI::log( '  [OK] Crypto key derivable (AUTH_KEY / SECURE_AUTH_SALT present)' );
 		}
 
+		// ── Entity group name collisions ─────────────────────────────────────────
+		$collisions = TMDO_Entity_Registry::get_collisions();
+		if ( empty( $collisions ) ) {
+			WP_CLI::log( '  [OK] No entity group name collisions' );
+		}
+		foreach ( $collisions as $c ) {
+			WP_CLI::warning(
+				sprintf(
+					'  [COLLISION] %s/%s registered twice with different fields (second ignored) — added: %s; removed: %s; changed: %s',
+					$c['entity_type'],
+					$c['group'],
+					implode( ', ', $c['added'] ) ?: '-',
+					implode( ', ', $c['removed'] ) ?: '-',
+					implode( ', ', $c['changed'] ) ?: '-'
+				)
+			);
+			$all_ok = false;
+		}
+
+		// ── Orphaned entity groups (restored from wpdo_registry_meta) ───────────
+		foreach ( TMDO_Entity_Registry::get_restored_groups() as $r ) {
+			WP_CLI::warning(
+				sprintf(
+					'  [ORPHAN] %s/%s — no active plugin registers it; restored %d field(s) from wpdo_registry_meta%s%s. Reactivate the owner or write the data back before removing it.',
+					$r['entity_type'],
+					$r['group'],
+					$r['fields'],
+					$r['skipped'] ? ' (skipped, owned by another group: ' . implode( ', ', $r['skipped'] ) . ')' : '',
+					$r['native'] ? ' (left on native meta, which has newer data: ' . implode( ', ', $r['native'] ) . ')' : ''
+				)
+			);
+			$all_ok = false;
+		}
+
 		// Check recent errors.
 		$errors = TMDO_Logger::get_recent( '', 5 );
 		if ( ! empty( $errors ) ) {
@@ -632,46 +667,6 @@ class TMDO_CLI {
 		WP_CLI::success( "Module {$module} disabled (idle)." );
 	}
 
-	/**
-	 * Import settings from HP Custom Tables.
-	 *
-	 * ## EXAMPLES
-	 *
-	 *     wp wpdo import-hpct
-	 *
-	 * @param array $args       Positional arguments.
-	 * @param array $assoc_args Associative arguments.
-	 * @return void
-	 *
-	 * @subcommand import-hpct
-	 */
-	public function import_hpct( $args, $assoc_args ): void { // phpcs:ignore Generic.CodeAnalysis.UnusedFunctionParameter.FoundAfterLastUsed
-		if ( TMDO_HPCT_Import::is_imported() ) {
-			WP_CLI::warning( 'HPCT settings have already been imported.' );
-			return;
-		}
-
-		if ( ! TMDO_HPCT_Import::can_import() ) {
-			WP_CLI::error( 'HP Custom Tables plugin not detected or already imported.' );
-		}
-
-		// Show preview.
-		$preview_data = TMDO_HPCT_Import::preview();
-		if ( ! empty( $preview_data['modules'] ) ) {
-			WP_CLI::log( 'Import preview:' );
-			WP_CLI\Utils\format_items( 'table', $preview_data['modules'], array( 'module', 'hpct_status', 'wpdo_state' ) );
-		}
-
-		WP_CLI::confirm( 'Proceed with import?' );
-
-		$result = TMDO_HPCT_Import::run();
-		if ( is_wp_error( $result ) ) {
-			WP_CLI::error( $result->get_error_message() );
-		}
-
-		WP_CLI::success( 'HPCT settings imported successfully. You can now deactivate HP Custom Tables.' );
-	}
-
 	/**
 	 * Run performance benchmark.
 	 *
@@ -796,12 +791,12 @@ class TMDO_CLI {
 			if ( ! empty( $warm_posts ) ) {
 				// Seed warm zone entries so reads are non-trivial.
 				foreach ( $warm_posts as $pid ) {
-					TMDO_Zone_Warm::set( (int) $pid, TMDO_Listing_Stats::VIEW_KEY, '1', DAY_IN_SECONDS );
+					TMDO_Zone_Warm::set( (int) $pid, TMDO_Zone_Warm::VIEW_KEY, '1', DAY_IN_SECONDS );
 				}
 
 				$start = microtime( true );
 				foreach ( $warm_posts as $pid ) {
-					TMDO_Zone_Warm::get( (int) $pid, TMDO_Listing_Stats::VIEW_KEY );
+					TMDO_Zone_Warm::get( (int) $pid, TMDO_Zone_Warm::VIEW_KEY );
 				}
 				$warm_ms = ( microtime( true ) - $start ) * 1000;
 
@@ -1146,6 +1141,10 @@ class TMDO_CLI {
 		WP_CLI::log( "Deleted {$warm_deleted} expired warm entries." );
 
 		if ( $archive_expired ) {
+			// Listing archival is HivePress-specific and ships in that AddOn.
+			if ( ! class_exists( 'TMDO_Listing_Stats' ) ) {
+				WP_CLI::warning( '--archive-expired needs 2meet-data-optimizer-hivepress-addon; skipping.' );
+			} else {
 				WP_CLI::log( 'Archiving expired listing fields to Zone D...' );
 				$archived = TMDO_Listing_Stats::archive_expired_listings();
 				WP_CLI::log( "Archived {$archived} fields from expired listings." );
@@ -1153,6 +1152,7 @@ class TMDO_CLI {
 				$stats = TMDO_Zone_Archive::stats();
 				WP_CLI::log( "Zone D total: {$stats['total_rows']} rows, {$stats['compressed_rows']} compressed." );
 			}
+		}
 
 		WP_CLI::success( 'Cleanup complete.' );
 	}
@@ -1384,22 +1384,6 @@ class TMDO_CLI {
 		}
 	}
 
-	/**
-	 * Format the HPCT status string for display.
-	 *
-	 * @param array $compat Compatibility check result array.
-	 * @return string Human-readable HPCT status.
-	 */
-	private static function format_hpct_status( array $compat ): string {
-		if ( $compat['hpct_active'] && $compat['hpct_imported'] ) {
-			return 'Active (Imported)';
-		}
-		if ( $compat['hpct_active'] ) {
-			return 'Active (Not imported — run `wp wpdo import-hpct`)';
-		}
-		return 'Not found';
-	}
-
 	/**
 	 * Create the appropriate migration instance for a module name.
 	 *

docs/BENCHMARK-SCALE.md

@@ -0,0 +1,74 @@
+# 規模效能基準：原生 postmeta vs Hot 表 vs Entity 表
+
+**量測日期**：2026-09-25　**分支**：`hardening/2.0`　**目標規模**：vendor 100,000、listing 1,000,000
+
+## 如何重現
+
+```bash
+# DB 帳密沿用整合測試的 TMDO_TEST_DB_* 環境變數；資料庫名稱必須以 _bench 結尾
+TMDO_TEST_DB_NAME=wp_wpdo_bench php tests/bench/seed.php --vendors=100000 --listings=1000000   # 約 7.5 分鐘
+TMDO_TEST_DB_NAME=wp_wpdo_bench php tests/bench/run.php --iterations=20                          # 約 20 分鐘
+```
+
+## 環境與資料
+
+| 項目 | 值 |
+|---|---|
+| 資料庫 | MariaDB 10.11.14（本機，InnoDB 預設設定） |
+| 主機 | 8 核、31 GB RAM、NVMe |
+| 資料 | 100,000 vendor（users + hp_vendor posts）、1,000,000 listing（90% publish） |
+| 原生 meta | postmeta 9,549,796 筆（951 MB）、usermeta 600,000 筆 |
+| Entity 表 | `wpdo_post_hp_listing_core` 1,000,000 筆（379 MB） |
+| Hot 表 | `wpdo_hot_hp_listing` 1,000,000 筆（229 MB） |
+
+SQL 的形狀與實際程式一致：原生是 WP_Query 的 meta_query（每個條件一個 INNER JOIN、數值用 CAST、`SQL_CALC_FOUND_ROWS`），Hot 是 `TMDO_Query_Router`，Entity 是 `TMDO_Post_Query_Router`。每個情境 20 次，另有 3 次暖機不計入，參數隨機但可重現（`--seed=7`）。寫入在交易內執行後 rollback。
+
+> 20 次取樣下 p95 等於最大值，僅供參考。
+
+## 結果
+
+| 情境 | 形式 | p50 ms | p95 ms | 結果筆數 | 使用索引 |
+|---|---|---:|---:|---:|---|
+| 1. 價格區間搜尋（命中約 20%） | 原生 | **14,695** | 14,890 | 180,292 | postmeta:post_id |
+| | Hot | 558 | 3,605 | 180,329 | h:ALL |
+| | Entity | 652 | 3,817 | 180,300 | e:ALL |
+| 2. 價格區間 + verified=1 | 原生 | **17,094** | 17,250 | 54,197 | postmeta:post_id ×2 |
+| | Hot | 277 | 299 | 54,109 | `idx_hp_verified_hp_price`（複合） |
+| | Entity | 337 | 340 | 54,180 | e:ALL |
+| 3. 某 vendor 名下的 listing | `post_parent`（HivePress 實際做法） | 0.19 | 0.25 | 7 | posts:post_parent |
+| | 原生 meta `hp_vendor` | **14,432** | 14,599 | 8 | postmeta:post_id |
+| | Hot | **3,405** | 3,651 | 10 | 無可用索引 |
+| | Entity | 0.28 | 0.33 | 8 | `idx_hp_vendor` |
+| 4. 單筆 listing 讀全部 meta | 原生 | 0.12 | 0.15 | 9 列 | postmeta:post_id |
+| | Hot / Entity | 0.09 | 0.11–0.14 | 1 列 | 主鍵 |
+| 5. 列表頁預載 20 筆 meta | 原生 | 0.59 | 0.61 | 181 列 | postmeta:post_id |
+| | Hot / Entity | 0.21–0.22 | 0.23–0.26 | 20 列 | 主鍵 |
+| 6. 單一 vendor 讀使用者 meta | 原生 | 0.11 | 0.14 | 6 列 | usermeta:user_id |
+| | Entity | 0.08 | 0.11 | 1 列 | 主鍵 |
+| 7. 寫入：更新一筆價格 | 原生 | 0.12 | 0.16 | — | — |
+| | Entity | 0.10 | 0.13 | — | — |
+| | dual_write（兩邊都寫） | 0.22 | 0.26 | — | — |
+
+## 結論
+
+1. **原生 meta_query 在百萬規模下無法使用。** 任何以 meta 為條件的搜尋都要 14–17 秒，扁平化是必要的，不是錦上添花。
+2. **扁平表的價值集中在「搜尋與篩選」。** 單筆或批次讀 meta（情境 4–6）三種形式都在 1 ms 內，差距可以忽略，而且實務上還有 object cache。
+3. **寬範圍搜尋仍有瓶頸（情境 1，p50 約 0.6 秒、p95 約 3.7 秒）。** 命中 18 萬筆時，優化器選擇全表掃描；再加上 `SQL_CALC_FOUND_ROWS` 要算總數、`ORDER BY post_date` 要排序，還要 JOIN 回 `posts` 過濾狀態。p50 和 p95 差很多，是因為不同的價格區間讓優化器選了不同的執行計畫。
+   - **PR-028**：post 群組表可存 `post_status`、`post_date` 副本與 `(post_status, post_date)` 索引（`wp tmdo post-status-sync`）。1M 列實測：加欄位 0.05 秒（instant）、建索引 5.3 秒、分批（1,000 列）回填 32 秒，之後與 `posts` 0 筆不一致。欄位 collation 必須跟 `posts.post_status` 相同，否則比對會出現 illegal mix of collations。查詢改寫在 PR-029。
+   - **PR-029**：副本 ready 且無 NULL 時，單一 post type、明確狀態、依日期排序的搜尋改為 INNER JOIN、`post_status IN (…)`、`ORDER BY` 副本 `post_date`、不 GROUP BY（bench 變體 `entity+copy`，`--iterations=5`）。仍帶 `SQL_CALC_FOUND_ROWS` 時：情境 1 p50 670→770 ms、**p95 3,739→773 ms**；情境 2 p50 356→448 ms（變慢，因為算總數仍要掃完所有符合列）。拿掉 `SQL_CALC_FOUND_ROWS` 後同形狀情境 1 只要 **8 ms**（走 `idx_post_status_date`、LIMIT 提早結束）→ 完整效益要搭配 PR-030。
+   - **PR-030**：路由後的搜尋不再帶 `SQL_CALC_FOUND_ROWS`；總數改由同一查詢的 `COUNT(*)` 回答，存在物件快取，key 綁 `last_changed(posts)`（核心存文、Hook Bus 扁平寫入都會推進）。1M 實測：快取命中時整頁 **8 ms**（原 694 / 363 ms）；快取失效後第一次為頁面 8 ms + COUNT 608 / 344 ms，與原本相當。任何 post 寫入都讓全部計數失效（WP last_changed 語意），寫入頻繁的站命中率較低。
+4. **Hot 表的索引規則有漏洞。** `add_covering_indexes()` 只替 decimal、tinyint，以及名稱以 `_time` 結尾的 bigint 建索引，所以 `hp_vendor` 沒有索引，情境 3 要 3.4 秒，比 Entity 慢約 12,000 倍。
+5. **Entity 表只有單欄索引。** 情境 2 輸給有複合索引的 Hot 表（337 ms 對 277 ms）。
+   - **PR-027 之後**：群組可用 `register_group( ..., array( 'indexes' => ... ) )` 宣告複合索引。在 1M 列的 Entity 表加上 `cidx_verified_price (hp_verified, hp_price)` 花 8.1 秒；重跑情境 2（`--iterations=10`），Entity p50 從 337 ms 降到 **278 ms**（p95 285 ms），Hot 是 269 ms（p95 280 ms），差距在量測誤差內。執行計畫改走 `e:cidx_verified_price`。
+6. **dual_write 的寫入成本約為兩倍（0.22 ms 對 0.12 ms）**，絕對值很小，不是瓶頸。
+7. **Hot 表和 Entity 表儲存了同一份 listing 資料**（合計約 608 MB），兩者功能重疊。
+
+## 優化候選（待使用者確認後排入 backlog）
+
+| # | 候選 | 針對 | 預期效果 |
+|---|---|---|---|
+| O-1 | Entity 表把 `post_status`、`post_date` 一併存進來，並建 `(hp_status, post_date)` 等複合索引，讓搜尋不必 JOIN 回 `posts` 排序 | 情境 1、2 | 寬範圍搜尋改為走索引排序，避免 filesort |
+| O-2 | Entity 表支援群組層級的複合索引宣告，例如 `(hp_verified, hp_price)`、`(hp_featured, hp_price)` | 情境 2 | 追上或超過 Hot 表 |
+| O-3 | Hot 表的索引規則補上外鍵型 bigint 欄位（例如 `hp_vendor`） | 情境 3 | 3.4 秒降到 1 ms 以下 |
+| O-4 | 提供總數快取，或讓路由後的查詢可以不跑 `SQL_CALC_FOUND_ROWS`（MySQL 8 已棄用） | 情境 1、2 | 省去每次搜尋都要算出全部符合列的成本 |
+| O-5 | 評估 Hot 表與 Entity 表的整併，避免同一份資料存兩份 | 容量、寫入 | 省下約 229 MB 並減少一次寫入 |

docs/ENTITY_ADAPTER_COOKBOOK.md

@@ -0,0 +1,560 @@
+# Entity Adapter Cookbook
+
+How partner plugins integrate with `2meet-data-optimizer v1.0.0+` to gain anti-EAV
+benefits without modifying their existing data model.
+
+This is the practical guide. For the canonical vocabulary see `CONTEXT.md`; for the
+two standing architectural decisions see `docs/adr-001-post-entity-source-of-truth.md`
+and `docs/adr-002-dual-write-naming-collision.md`.
+
+---
+
+## ⚡ TL;DR Decision Tree (read this first — v2.1.2 reordered)
+
+The most common mistake is picking Tier 1-3 when Tier 5 was the right answer.
+Ask these questions in order:
+
+```
+Q1. Does the partner plugin have its OWN custom tables / lookup tables
+    that already provide anti-EAV? (HPOS, wc_product_meta_lookup,
+    BuddyPress activity tables, EDD payments, etc.)
+
+    ├── YES → 🟢 TIER 5 (integrate, don't duplicate). STOP HERE.
+    │         Register awareness only. Do not migrate.
+    │         See: TMDO_WooCommerce reference.
+    │
+    └── NO → continue to Q2.
+
+Q2. Is this a brand-new plugin you control end-to-end?
+
+    ├── YES → 🟢 TIER 4 (greenfield, anti-EAV from day 1).
+    │         Use `wp tmdo register-stub <slug>` for boilerplate.
+    │         See: 2meet-inquiries reference.
+    │
+    └── NO (existing plugin with postmeta) → continue to Q3.
+
+Q3. Is the relevant postmeta key heavily queried (filter / sort / search)?
+    Benchmark: > 10k rows OR > 3-condition meta_query OR sort by meta_value.
+
+    ├── YES → 🟢 TIER 1-3 (migrate to a Zone).
+    │         Tier 1 (5 min) for read-only optimization.
+    │         Tier 2 (30 min) for full dual-write.
+    │         Tier 3 (1-2 days) for new entity type.
+    │
+    └── NO → 🟢 LEAVE AS POSTMETA. Premature optimization.
+              Re-evaluate when scale crosses Q3 thresholds.
+```
+
+**Why Tier 5 is FIRST**: at v2.1.2 audit time, every mature plugin we surveyed
+(WC / BuddyPress potential / EDD potential / GravityForms) has its own anti-EAV.
+Defaulting to Tier 1-3 risks the catastrophic "two sources of truth" failure
+mode. See `docs/INTEGRATION_PATTERN_DECISION.md` for the principle.
+
+### How to tell if a partner plugin already has anti-EAV (Tier 5 candidate)
+
+Check these signals in order — any ONE is sufficient for Tier 5:
+
+| Signal | Where to look | Examples |
+|--------|---------------|----------|
+| **Lookup tables** with name pattern `*_lookup` / `*_meta_lookup` / `*_index` | `SHOW TABLES LIKE 'wp_{prefix}_%lookup%'` | `wp_wc_product_meta_lookup`, `wp_wc_customer_lookup` |
+| **HPOS-style migration toggle** (custom table replaces postmeta) | Plugin's settings → "High Performance" or "Custom Tables" feature | WooCommerce HPOS, EDD 3.0 payments |
+| **Dedicated columns instead of meta** in main entity table | `DESC wp_{plugin}_entities` shows `price`, `status` etc. as columns | BuddyPress activity table, MemberPress subscriptions |
+| **Plugin's own search/filter API** that bypasses `meta_query` | `wc_get_products()`, `bp_activity_get()`, `edd_get_payments()` | WC, BuddyPress, EDD all have native APIs |
+| **`*_stats` / `*_aggregate` tables** for analytics queries | `wp_wc_order_stats`, `wp_*_lookup` | WC analytics, MonsterInsights |
+| **db_version option** that hits `dbDelta` migration on plugin update | `wp option get {plugin}_db_version` returns a non-trivial version | Indicates the plugin has its own schema migration story |
+
+If you see **2+ signals** → definitely Tier 5.
+If you see **0 signals** but the plugin has heavy postmeta usage → Tier 1-3.
+If you see **0 signals** and postmeta is light → leave it (Q3 = NO).
+
+**Quick command-line audit**:
+```bash
+# List custom tables for a plugin
+wp db query "SHOW TABLES LIKE 'wp_{prefix}_%'"
+
+# Count postmeta keys the plugin owns (low = likely Tier 5; high = candidate Tier 1-3)
+wp db query "SELECT COUNT(DISTINCT meta_key) FROM wp_postmeta WHERE meta_key LIKE '\\_{prefix}_%'"
+
+# If both numbers are non-trivial → Tier 5 is correct (plugin uses both, but
+# its tables are the truth and postmeta is legacy/secondary).
+```
+
+---
+
+## Three integration tiers
+
+Pick the one that matches your plugin's data model:
+
+### Tier 1 — `TMDO_API` facade（最少改動，5 分鐘）
+
+If your plugin reads/writes `*_meta()` directly today, swap to the facade. This
+gives you future-proofing for free — the day the field migrates to a zone or
+entity adapter, your plugin needs zero changes.
+
+**Before:**
+```php
+$token = get_post_meta( $vendor_id, 'tmeetic_ical_token', true );
+update_post_meta( $vendor_id, 'tmeetic_ical_token', $new_token );
+```
+
+**After:**
+```php
+$token = class_exists( 'TMDO_API' )
+    ? TMDO_API::get_field( $vendor_id, 'tmeetic_ical_token' )
+    : get_post_meta( $vendor_id, 'tmeetic_ical_token', true );
+
+if ( class_exists( 'TMDO_API' ) ) {
+    TMDO_API::set_field( $vendor_id, 'tmeetic_ical_token', $new_token );
+} else {
+    update_post_meta( $vendor_id, 'tmeetic_ical_token', $new_token );
+}
+```
+
+**Real example:** `2meet-courses/includes/class-2meetic-ical.php` (Wave 2 改造).
+
+**Cross-entity:**
+```php
+TMDO_API::get_entity( 'user',    $user_id, 'points' );
+TMDO_API::get_entity( 'term',    $term_id, 'usage_count' );
+TMDO_API::get_entity( 'comment', $comment_id, 'helpful_count' );
+TMDO_API::set_entity( 'user', $uid, 'points', 50 );
+```
+
+**Helper:**
+```php
+TMDO_API::is_field_registered( 'post', 'hp_price' );  // bool
+TMDO_API::trace_storage( 'post', 'hp_price', 'hp_listing' );  // 'zone_hot' | 'postmeta' | ...
+```
+
+### Tier 2 — Schema Registry 註冊（中等改動，30 分鐘）
+
+If your plugin owns specific meta_keys that benefit from Hot zone (search/filter),
+Cold zone (display/JSON), or Warm zone (TTL counter) treatment.
+
+**Implementation:** create one integration class.
+
+```php
+// my-plugin/includes/class-tmdo-myplugin.php
+final class TMDO_MyPlugin {
+    public static function register(): void {
+        // Detect partner plugin (2meet-data-optimizer) — no-op when absent.
+        if ( ! class_exists( 'TMDO_Schema_Registry' ) ) {
+            return;
+        }
+        add_action( 'wpdo_register_fields', array( __CLASS__, 'register_fields' ) );
+        add_action( 'wpdo_register_custom_tables', array( __CLASS__, 'register_tables' ) );
+    }
+
+    public static function register_fields( TMDO_Schema_Registry $registry ): void {
+        $registry->register_many( 'my-plugin', array(
+            // Hot zone (search/filter): flat 1NF column with index.
+            array(
+                'post_type' => 'my_post_type',
+                'meta_key'  => 'my_price',
+                'zone'      => 'hot',
+                'data_type' => 'decimal(10,2) NOT NULL DEFAULT 0',
+                'column'    => 'my_price',
+                'indexed'   => true,
+            ),
+            // Cold zone (description / JSON / display).
+            array(
+                'post_type'   => 'my_post_type',
+                'meta_key'    => 'my_description',
+                'zone'        => 'cold',
+                'cache_group' => 'wpdo_cold_my_post_type',
+                'cache_ttl'   => HOUR_IN_SECONDS,
+            ),
+        ) );
+    }
+
+    public static function register_tables( TMDO_Custom_Table_Registry $registry ): void {
+        $registry->register( 'my-plugin', array(
+            'table_name'      => 'my_custom_table',
+            'primary_key'     => 'id',
+            'post_type_link'  => 'my_post_type',
+            'doctor_callback' => array( __CLASS__, 'doctor_my_table' ),
+        ) );
+    }
+
+    public static function doctor_my_table(): array {
+        global $wpdb;
+        $count = (int) $wpdb->get_var( "SELECT COUNT(*) FROM `{$wpdb->prefix}my_custom_table`" );
+        return array( 'ok' => true, 'message' => "rows: {$count}" );
+    }
+}
+
+// In your plugin's bootstrap:
+add_action( 'plugins_loaded', array( 'TMDO_MyPlugin', 'register' ), 5 );
+```
+
+**Real examples:**
+- `2meet-data-optimizer/includes/integrations/class-tmdo-infocards.php` — 9 fields + 3 tables
+- `2meet-data-optimizer/includes/integrations/class-tmdo-bookings.php` — 7 tables only
+
+### Tier 3 — Custom Entity Adapter（大改動，1-2 天）
+
+If you need cross-entity behaviour (e.g. counter that works on user / term /
+comment uniformly), use the demo entity counter pattern.
+
+**Real example:** `2meet-data-optimizer/includes/integrations/class-tmdo-demo-entity-counter.php`.
+
+**Pattern:**
+```php
+final class My_Counter {
+    public const MODULE = 'entity_my_counter';
+    public const TABLE  = 'wpdo_my_counters';
+
+    public static function install_table(): void {
+        global $wpdb;
+        require_once ABSPATH . 'wp-admin/includes/upgrade.php';
+        dbDelta( "CREATE TABLE {$wpdb->prefix}" . self::TABLE . " (
+          id bigint(20) unsigned NOT NULL AUTO_INCREMENT,
+          entity_type varchar(20) NOT NULL,
+          entity_id   bigint(20) unsigned NOT NULL,
+          counter_key varchar(100) NOT NULL,
+          counter_value bigint(20) NOT NULL DEFAULT 0,
+          updated_at datetime NOT NULL,
+          PRIMARY KEY (id),
+          UNIQUE KEY ui_entity_counter (entity_type, entity_id, counter_key),
+          KEY idx_lookup (entity_type, counter_key, counter_value)
+        ) {$wpdb->get_charset_collate()};" );
+    }
+
+    public static function set( string $entity_type, int $entity_id, string $key, int $value ): void {
+        // Always write native (durability anchor).
+        TMDO_API::set_entity( $entity_type, $entity_id, $key, $value );
+
+        // Conditional dual-write to zone table.
+        if ( TMDO_Feature_Flags::is_write_active( self::MODULE ) ) {
+            TMDO_DB::upsert(
+                $GLOBALS['wpdb']->prefix . self::TABLE,
+                array(
+                    'entity_type'   => $entity_type,
+                    'entity_id'     => $entity_id,
+                    'counter_key'   => $key,
+                    'counter_value' => $value,
+                    'updated_at'    => current_time( 'mysql' ),
+                ),
+                array( 'counter_value', 'updated_at' ),
+                array( 'entity_type', 'entity_id', 'counter_key' ),
+                array( '%s', '%d', '%s', '%d', '%s' )
+            );
+        }
+    }
+
+    public static function get( string $entity_type, int $entity_id, string $key ): int {
+        if ( TMDO_Feature_Flags::is_read_custom( self::MODULE ) ) {
+            // Read from zone table; fallback to native if row missing.
+            $val = $GLOBALS['wpdb']->get_var( $GLOBALS['wpdb']->prepare(
+                "SELECT counter_value FROM `{$GLOBALS['wpdb']->prefix}" . self::TABLE . "`
+                 WHERE entity_type = %s AND entity_id = %d AND counter_key = %s",
+                $entity_type, $entity_id, $key
+            ) );
+            if ( null !== $val ) {
+                return (int) $val;
+            }
+        }
+        return (int) TMDO_API::get_entity( $entity_type, $entity_id, $key );
+    }
+
+    public static function top_n( string $entity_type, string $key, int $n = 10 ): array {
+        // Killer query that postmeta cannot do efficiently.
+        return $GLOBALS['wpdb']->get_results( $GLOBALS['wpdb']->prepare(
+            "SELECT entity_id, counter_value FROM `{$GLOBALS['wpdb']->prefix}" . self::TABLE . "`
+             WHERE entity_type = %s AND counter_key = %s
+             ORDER BY counter_value DESC LIMIT %d",
+            $entity_type, $key, $n
+        ), ARRAY_A );
+    }
+}
+```
+
+---
+
+## FSM lifecycle reference
+
+For Tier 3 entity adapters, drive the 7+1 state machine via CLI:
+
+```bash
+# 1. Install schema (one-time)
+wp tmdo doctor   # verify base tables
+
+# 2. Initial state: idle (do not register feature flag)
+wp tmdo mode-audit | grep entity_my_counter   # should show 'idle'
+
+# 3. Begin dual_write — both native + zone get writes
+wp tmdo mode-set entity_my_counter dual_write
+
+# 4. Run backfill (if you have existing data)
+# (custom script or wp tmdo migrate)
+
+# 5. Verify with shadow_read for 7 days
+wp tmdo mode-set entity_my_counter verify
+wp tmdo shadow-enable entity_my_counter
+
+# Check for diffs
+wp eval 'echo (int) $GLOBALS["wpdb"]->get_var("SELECT COUNT(*) FROM {$GLOBALS[\"wpdb\"]->prefix}wpdo_shadow_diffs WHERE entity_type=\"user\"");'
+
+# 6. Cutover — reads switch to zone
+wp tmdo shadow-disable entity_my_counter
+wp tmdo mode-set entity_my_counter cutover
+
+# 7. After 7 more days, cleanup native rows
+wp tmdo mode-set entity_my_counter cleanup
+
+# 8. Final state — no fallback, zone is source of truth
+wp tmdo mode-set entity_my_counter complete
+
+# Rollback at any time
+wp tmdo mode-set entity_my_counter idle
+```
+
+---
+
+## Anti-EAV lint exemptions
+
+Some patterns require direct SQL by design (one-off migration scans, cron token
+expiry checks). Mark them with `phpcs:ignore` so `wp tmdo lint --strict` accepts them:
+
+```php
+// phpcs:ignore WPDO.AntiEAV.PostmetaScan -- Cron sweeps postmeta to find expiring IG tokens.
+$ids = $wpdb->get_col( $wpdb->prepare(
+    "SELECT post_id FROM {$wpdb->postmeta} WHERE meta_key = 'tmeetic_ig_token_expiry' AND CAST(meta_value AS UNSIGNED) < %d",
+    time() + 31 * DAY_IN_SECONDS
+) );
+```
+
+**Available rules:**
+- `WPDO.AntiEAV.PostmetaScan` — cross-postmeta scan in migration / cron
+- `WPDO.AntiEAV.UsermetaScan` — same, usermeta
+- `WPDO.AntiEAV.PostmetaFallback` — fallback path during graceful degradation
+
+The exemption stays line-local. The lint cannot be silenced for an entire file.
+
+---
+
+## Verification checklist (before merge)
+
+```bash
+# 1. Lint passes strict
+wp tmdo lint --plugin=$(pwd) --strict
+
+# 2. Conflict scan clean
+wp tmdo conflict-scan
+
+# 3. Doctor check (your custom tables registered + healthy)
+wp tmdo doctor
+
+# 4. Tests pass (if your plugin has them)
+./vendor/bin/phpunit
+```
+
+---
+
+## Real-world results (dev10, 2026-04-25)
+
+Production benchmarks measured with 50 hp_listing posts:
+
+| Path | Latency (n=100) | Speedup |
+|---|---|---|
+| Native `get_post_meta()` | 205ms | 1.0x baseline |
+| `TMDO_Listing_Stats::get_view_count()` (Zone B Warm + fallback) | 81ms | **2.51x** |
+| `TMDO_Demo_Entity_Counter::top_n()` (Zone via 1 LEFT JOIN) | 0.19ms / call | **postmeta cannot do efficiently** |
+
+The `top_n` example is the killer use case — sorting 1000s of users by point
+count via postmeta requires a full meta_value scan + filesort. The zone table
+serves it from a covering index in sub-millisecond.
+
+---
+
+## Tier 4: Greenfield plugin — `2meet-inquiries` (v0.5.0)
+
+The cleanest case: a plugin written **from scratch** to be anti-EAV from day 1.
+Use this as a template for all new 2meet-* plugins.
+
+### Why this is the gold standard
+
+| Pattern | What `2meet-inquiries` does | What `bookings`/`courses`/`infocards` had to retrofit |
+|---|---|---|
+| Large structured config | `wp_2mqi_forms.config_json LONGTEXT` (custom table) | Originally postmeta `_eh_inquiry_config` (anti-EAV violation) |
+| Hot-zone meta on hp_vendor | `wpdo_register_fields` — `_tmqi_default_form_id` (bigint, indexed) | Some retrofitted via Schema_Registry Hot Wave 1; others still WP_Query-driven |
+| Sensitive PII | `customer_email_enc BLOB` + `customer_email_hash CHAR(64)` for indexed lookup | Originally separate plugins each rolled own AES wrapper |
+| Audit-trail rows | Dedicated `wp_2mqi_responses` table (1 row per submission) | Older plugins used `wp_postmeta` rows-per-field → EAV blow-up |
+| Analytics events | Dedicated `wp_2mqi_analytics` (event_type, stage_index, session_id) | N/A — most plugins didn't have analytics, would've gone to postmeta if they did |
+| Webhook config | `wp_options` per vendor (autoload=no, low cardinality) | Same |
+
+### Anatomy: 4 custom tables, 0 plugin-owned postmeta keys
+
+```
+wp_2mqi_forms       — form definitions (config_json + counters + slug)
+wp_2mqi_responses   — submitted inquiries (encrypted PII + payload_json)
+wp_2mqi_drafts      — in-progress submissions (token + 14-day expire)
+wp_2mqi_analytics   — funnel events (view, stage_*, submit)
+```
+
+Plus 2 `hp_vendor` fields registered to Schema_Registry Hot zone:
+
+```php
+$registry->register_many( '2meet-inquiries', array(
+    array(
+        'post_type' => 'hp_vendor',
+        'meta_key'  => '_tmqi_default_form_id',
+        'zone'      => 'hot',
+        'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
+        'column'    => '_tmqi_default_form_id',
+        'indexed'   => true,
+    ),
+    array(
+        'post_type' => 'hp_vendor',
+        'meta_key'  => '_tmqi_inquiries_enabled',
+        'zone'      => 'hot',
+        'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
+        'column'    => '_tmqi_inquiries_enabled',
+        'indexed'   => true,
+    ),
+) );
+```
+
+### Bootstrap pattern (recommended)
+
+```php
+final class TMQI_Plugin {
+    use TMDO_Anti_EAV_Aware;  // ← strict contract; fails to load without it
+
+    public function run(): void {
+        // Register tables on the canonical action.
+        add_action( 'wpdo_register_fields',        array( __CLASS__, 'register_wpdo_fields' ) );
+        add_action( 'wpdo_register_custom_tables', array( __CLASS__, 'register_custom_tables' ) );
+        // ...
+    }
+
+    public static function register_wpdo_fields(): void { /* hot-zone fields */ }
+    public static function register_custom_tables( $registry = null ): void {
+        TMQI_WPDO_Integration::register_tables( $registry );
+    }
+}
+```
+
+### Ground rules followed
+
+✅ **No `update_post_meta()` calls anywhere** — even for hp_vendor metas, we call `TMDO_API::set_field()`
+✅ **No direct `SELECT FROM wp_postmeta`** — `wpdo lint --strict` exits 0
+✅ **All large JSON in custom tables** — `config_json` and `payload_json` columns, never postmeta
+✅ **Sensitive data encrypted** — reuse `TMEETIC_Crypto::encrypt()` (don't roll your own)
+✅ **Indexed search on encrypted columns** — store SHA-256 hash alongside ciphertext
+✅ **Single `do_action( 'tmqi/submitted' )`** — downstream notifiers, analytics, webhook all hook here
+
+### Verification (run on dev10 right now)
+
+```bash
+# Custom tables registered
+wp eval 'echo count(TMDO_Custom_Table_Registry::instance()->for_provider("2meet-inquiries"));'
+# → 4
+
+# Strict lint passes
+wp tmdo lint --plugin=$(wp plugin path 2meet-inquiries) --strict
+# → Success: Anti-EAV lint passed
+
+# Conflict scan
+wp tmdo conflict-scan
+# → 0 conflicts detected
+```
+
+### Takeaway for Wave 2/3 retrofits
+
+When refactoring an existing plugin to be anti-EAV, the question is not "how do
+we shoehorn this into postmeta less?" — it's "**what does the data look like if
+we redesign it like 2meet-inquiries from day 1?**" Then plot a migration path.
+
+For most plugins the answer is: **replace one big postmeta key with one custom
+table row, and register a small number of hot-zone hp_vendor fields for search.**
+
+---
+
+## Tier 5: Integrating with a plugin that has its OWN anti-EAV — `TMDO_WooCommerce` (v2.1.0)
+
+The hardest case: WC core already has anti-EAV (HPOS for orders, `wp_wc_product_meta_lookup`
+for products). WPDO's job is to **integrate, not duplicate**.
+
+### Why this is different from Tiers 1-4
+
+| Aspect | Tier 1-4 (we own the data) | Tier 5 (WC owns it) |
+|--------|---------------------------|----------------------|
+| Custom tables | We define + create | WC defines + creates |
+| Hot-zone fields | Migrated from postmeta to our Hot zone | Already in WC's lookup tables; we just **register awareness** |
+| Doctor probes | We control existence + schema | We probe but don't fix |
+| Schema drift | Our migration tooling | WC's update_db_*() handles |
+| Conflict | None (single owner) | **Risk: shadow lookup tables** |
+
+### Anti-pattern: ❌ DON'T duplicate WC's lookup tables
+
+```php
+// WRONG — creates a parallel system that drifts from WC's truth
+$schema->register( 'woocommerce', array(
+    'post_type' => 'product',
+    'meta_key'  => '_price',
+    'zone'      => 'hot',
+    // ... migrate _price into our wpdo_hot_product table
+) );
+// Now `_price` lives in BOTH wp_wc_product_meta_lookup AND our hot zone.
+// Updates touch one but not the other. Catastrophe.
+```
+
+### Right pattern: ✅ Register awareness, defer to WC's anti-EAV
+
+```php
+// In TMDO_WooCommerce::register_custom_tables():
+foreach ( WC_CORE_TABLES as $name => $meta ) {
+    $registry->register( 'woocommerce', array(
+        'table_name'     => $name,        // wp_wc_product_meta_lookup
+        'description'    => $meta['description'],
+        'doctor_callback' => array( __CLASS__, 'doctor_check' ),
+    ) );
+}
+
+// In TMDO_WooCommerce::register_schema_fields():
+// Register postmeta keys WC STILL uses (the ones not yet migrated to lookups).
+// When `_price` is also in wc_product_meta_lookup, registering doesn't migrate
+// to OUR hot zone — it's just a hint to TMDO_API consumers about "this is hot".
+$schema->register_many( 'woocommerce', array(
+    array( 'post_type' => 'product', 'meta_key' => '_price', 'zone' => 'hot', ... ),
+    // ...
+) );
+```
+
+### Decision tree for new partner integrations
+
+```
+Does the partner plugin store data in postmeta?
+├── NO → already on custom tables → Tier 4 (register tables + done)
+└── YES → does the partner have its own lookup/cache table?
+    ├── NO → Tier 1-3 (we manage migration)
+    └── YES → Tier 5: register awareness only, never duplicate
+```
+
+### Tier 5 checklist for `TMDO_WooCommerce`
+
+- [x] Register all 20 `wp_wc_*` tables to Custom_Table_Registry
+- [x] Add `doctor_callback` that probes existence + row count (not schema diff)
+- [x] Register hot-zone postmeta fields (legacy path only) — WC's lookup is the truth
+- [x] Detect HPOS state via `OrderUtil::custom_orders_table_usage_is_enabled()`
+- [x] When HPOS off → register order postmeta hot fields (`_order_total`, etc.)
+- [x] When HPOS on → DON'T register order postmeta (would be stale)
+- [x] Customer usermeta hot fields registered unconditionally (WC always uses usermeta for these)
+- [x] Subscription product fields conditional on `WC_Subscriptions` OR `wc-linepay-subscription`
+- [x] Own custom table (`wpdo_wc_commissions`) for vendor marketplace tracking
+- [x] Admin notice recommends HPOS when legacy order count > threshold
+- [x] Admin dashboard surfaces commission stats + table health
+
+### What this DOESN'T do (and shouldn't)
+
+- ❌ Migrate `_price` into our hot zone (WC already has wc_product_meta_lookup)
+- ❌ Mirror `wc_orders` into our archive zone (WC handles its own archive)
+- ❌ Intercept `update_post_meta` for product meta (interferes with WC's lookup sync)
+- ❌ Create products / orders / customers (WC's domain)
+
+### When to revisit
+
+- WC drops a lookup table (unlikely but possible) → migrate that field path to Tier 3
+- HPOS becomes default-on → audit our order postmeta registrations and remove
+- New WC subextension introduces meta keys we should register → add to `register_subscription_fields()`

docs/INTEGRATION_PATTERN_DECISION.md

@@ -0,0 +1,120 @@
+# Integration Pattern Decision — 2026-04-25
+
+> **2026-09 更新：** 2meet 自家外掛回到「partner 自行註冊」，做法見 `PARTNER-REGISTRATION.md`；對應的 8 個 AddOn 已淘汰。
+
+> **v1.0.0 後記（2026-07-31）：本文結論已被架構拆分取代。**
+> 當時的兩個選項是「集中在核心」vs「各外掛自帶 bridge」。v1.0.0 走的是第三條路：
+> 每個夥伴外掛對應**一個獨立 AddOn 外掛**（`2meet-data-optimizer-<partner>-addon`，共 11 個），
+> 核心完全不認識夥伴外掛。下文的 `class-tmdo-<partner>.php` 一律已搬進對應 AddOn。
+> 本文保留是為了記錄「為什麼不選 per-plugin bridge 檔」這段推理 —— 該理由對 AddOn 邊界同樣適用。
+
+**Trigger**: Step BB audit revealed two parallel patterns for partner plugin integration; need to commit to one.
+
+---
+
+## What I found
+
+| Plugin | Centralized in 2meet-data-optimizer? | Own bridge file? |
+|--------|-----------------------------------|------------------|
+| 2meet-infocards | ✅ `class-tmdo-infocards.php` | ❌ |
+| 2meet-bookings | ✅ `class-tmdo-bookings.php` | ❌ |
+| 2meet-quotation | ✅ `class-tmdo-quotation.php` | ❌ |
+| 2meet-events | ✅ `class-tmdo-events.php` | ✅ `class-tmevents-wpdo-bridge.php` (**duplicate!**) |
+| 2meet-collab | ✅ `class-tmdo-collab.php` | ❌ |
+| 2meet-mobile-bridge | ✅ `class-tmdo-mobile-bridge.php` | ❌ |
+| 2meet-playlist | ✅ `class-tmdo-playlist.php` | ❌ |
+| 2meet-courses | ❌ | ✅ `class-2meetic-courses-wpdo.php` (NEW today, P step) |
+| 2meet-inquiries | ❌ | ✅ `class-tmqi-wpdo-integration.php` (NEW from scratch) |
+
+**Inconsistency**:
+- 7 plugins are integrated centrally (legacy Wave 2 demo pattern)
+- 2 new plugins (today) are integrated decentrally (cookbook Tier 4 pattern)
+- 2meet-events has **both** (silent dedup by registry — works but smelly)
+
+---
+
+## Decision: **Decentralized (own bridge) is the canonical pattern**
+
+### Rationale
+
+1. **Cookbook Tier 4 documents it as the standard** for new plugins (already published)
+2. **Each plugin owns its own data contract** — no cross-plugin coupling in 2meet-data-optimizer
+3. **Easier to ship** — partner plugin can update its registration without bumping 2meet-data-optimizer
+4. **Simpler mental model** — "where do tables get registered? In the plugin that owns them"
+
+### Why we're NOT migrating today
+
+1. **Freeze**: Per `FREEZE_2026-04-25.md`, no risky refactors during freeze
+2. **Working**: All 7 centralized integrations work; registry dedup handles the events double-pattern
+3. **No vendor demand**: Nobody has reported confusion or bugs from the dual pattern
+4. **Risk > reward**: Moving 7 classes touches 8 plugins, requires coordinated version bumps, breaks atomic rollback
+
+---
+
+## Migration plan (when we DO migrate)
+
+Trigger conditions (any one):
+- A new partner plugin can't ship cleanly because of the centralized pattern
+- A bug in the centralized integrations affects multiple plugins simultaneously
+- We hit 10+ partner plugins (currently 9) and the 2meet-data-optimizer integrations dir is too crowded
+
+### Steps (per plugin, ~0.5 day each)
+
+```
+1. Copy /2meet-data-optimizer/includes/integrations/class-tmdo-{slug}.php
+   to /{plugin-slug}/includes/integrations/class-{prefix}-wpdo.php
+
+2. Rename class:
+   - TMDO_Bookings → TMB_WPDO
+   - TMDO_Quotation → TMQUO_WPDO  (etc.)
+   - Keep registration logic identical
+
+3. Wire in {plugin-slug} bootstrap (after main classes load):
+   require_once $dir . 'includes/integrations/class-{prefix}-wpdo.php';
+   {prefix}_WPDO::register();
+
+4. In 2meet-data-optimizer:
+   - Remove require_once line
+   - Remove class name from the partner array (line ~208 of main file)
+   - Bump WPDO version (patch)
+
+5. Verify:
+   wp eval 'echo count(TMDO_Custom_Table_Registry::instance()->for_provider("{slug}"));'
+   → should still match the original count
+
+6. Bump partner plugin version (minor, since it now has new dependency)
+   Update Requires Plugins header to mention 2meet-data-optimizer ≥ X.Y.Z
+```
+
+### Special case: 2meet-events double-pattern
+
+Already has both. Migration = remove the centralized `class-tmdo-events.php` (the bridge in 2meet-events stays). This is the **simplest first migration** because the partner plugin's own bridge is already proven.
+
+---
+
+## What this means for tomorrow's reader
+
+If you're writing a NEW 2meet-* plugin: **follow Tier 4 pattern, put your integration class in your own plugin's `includes/integrations/` directory.**
+
+If you're maintaining an EXISTING centralized integration in 2meet-data-optimizer: **leave it alone unless one of the migration triggers fires.**
+
+If you see the dual pattern in 2meet-events and are confused: **it's intentional, registry dedups, will be cleaned up later.**
+
+---
+
+## Anti-decisions (things explicitly NOT done)
+
+- ❌ NOT moving 7 integrations today — too risky, freeze active
+- ❌ NOT fixing the events double-pattern today — works fine, low priority
+- ❌ NOT writing a "consolidation script" — premature optimization for a one-time migration
+- ❌ NOT updating cookbook to mention the centralized pattern — would be confusing
+
+---
+
+## When to revisit this decision
+
+Same as freeze conditions (`FREEZE_2026-04-25.md`):
+- vendor reports confusion / bug
+- 30 days passed with no action needed
+- New plugin (#10+) onboarded
+- Production critical event involves the pattern

docs/PARTNER-REGISTRATION.md

@@ -0,0 +1,115 @@
+# Partner 外掛自行註冊指南
+
+> 適用：2meet 自家外掛（bookings、collab、hub、infocards、mobile-bridge、playlist、quotation、spoke）。
+> 這 8 個外掛原本各有一個 `2meet-data-optimizer-<slug>-addon`，替它們向核心註冊資料表和欄位。
+> 這些 AddOn 已淘汰：資料結構的定義應該和資料的擁有者放在一起，所以改由 partner 外掛自己註冊。
+> 啟用中的 AddOn 會在後台顯示淘汰通知（`TMDO_Deprecated_Addons_Notice`）。
+>
+> HivePress、WooCommerce、LatePoint 是第三方外掛，仍然保留各自的 AddOn。
+
+## 1. 掛上 trait
+
+核心提供 `TMDO_Anti_EAV_Aware` trait（`includes/trait-tmdo-anti-eav-aware.php`）。trait 由核心載入，所以只有在核心存在時才宣告 bridge 類別，把它放在獨立檔案：
+
+```php
+// 2meet-bookings.php（partner 主檔）
+add_action(
+	'plugins_loaded',
+	static function () {
+		if ( ! trait_exists( 'TMDO_Anti_EAV_Aware' ) ) {
+			return; // 核心未啟用：什麼都不做。
+		}
+		require_once __DIR__ . '/includes/class-tmb-tmdo-bridge.php';
+		( new TMB_TMDO_Bridge() )->boot();
+	},
+	3
+);
+```
+
+```php
+// includes/class-tmb-tmdo-bridge.php
+final class TMB_TMDO_Bridge {
+	use TMDO_Anti_EAV_Aware;
+
+	protected function plugin_slug(): string {
+		return '2meet-bookings';
+	}
+
+	public function boot(): void {
+		$this->bind_anti_eav_hooks();
+	}
+
+	// 覆寫需要的 on_register_*()，見下面兩節。
+}
+```
+
+**時機**：核心在 `plugins_loaded:4` 觸發 `wpdo_register_*`，並在 `init:1` 再觸發一次。
+建議掛在 `plugins_loaded:3`，這樣第一次觸發就能收到你的註冊，`init` 之前的讀寫也會被正確路由。
+掛在 `:5` 之後也能運作（會在 `init:1` 補上），只是 `init` 之前的請求看不到你的欄位。
+
+**名稱**：請用 `TMDO_Anti_EAV_Aware`。`WPDO_Anti_EAV_Aware` 是舊的 wp-data-optimizer 3.x 的 trait，由 mu-plugin `wpdo-policy-enforcer.php` 從已退役的路徑載入，沒有後面提到的 `post_types` 參數。
+
+## 2. 註冊自有資料表
+
+讓 `wp wpdo doctor` / benchmark 認得你的資料表，並做 schema 漂移檢查。以 bookings 為例：
+
+```php
+public function on_register_custom_tables( TMDO_Custom_Table_Registry $r ): void {
+	$this->register_custom_table(
+		$r,
+		array(
+			'table_name'       => '2mb_services',   // 不含 $wpdb->prefix
+			'primary_key'      => 'id',
+			'post_type_link'   => null,            // 若每列對應一個 post，填 post_type（playlist 用 'hp_vendor'）
+			'expected_columns' => array(
+				'id'        => 'BIGINT',
+				'vendor_id' => 'BIGINT',
+				'title'     => 'VARCHAR',
+				// …照 CREATE TABLE 逐欄列出
+			),
+			'indexes'          => array(
+				'vendor_id' => array( 'vendor_id' ),
+			),
+		)
+	);
+}
+```
+
+collab、playlist、quotation、mobile-bridge 的 AddOn 只做這件事：把各自 `includes/class-tmdo-<slug>.php` 裡 `register_custom_tables()` 的 `$tables` 陣列**原樣**搬進 partner 的 bridge 即可。
+
+## 3. 註冊 entity 欄位群組（選用）
+
+只有要把 meta 從 `wp_postmeta` / `wp_usermeta` 等 EAV 表移到扁平表時才需要：
+
+```php
+public function on_register_entity_fields(): void {
+	$this->register_entity_fields(
+		'post',
+		'tmb_service_core',
+		array(
+			array( 'key' => 'tmb_price', 'type' => 'decimal', 'searchable' => true ),
+			array( 'key' => 'tmb_status', 'type' => 'enum', 'options' => array( 'open', 'closed' ) ),
+		),
+		array( 'post_types' => array( 'tmb_service' ) )
+	);
+}
+```
+
+- **`post_types`（post 群組建議必填）**：群組只套用在這些 post type。多個群組共用同一個 meta key 時，會依 post 本身的類型決定寫到哪張表；不屬於這些 post type 的 post，這個 key 不受管理（照舊寫原生 meta）。沒有宣告時，共用 key 會被「最後註冊的群組」整個接走。
+- **定義一旦上線就不要改**：欄位定義的 hash 存在 `wpdo_registry_meta`，改了會對已有資料的扁平表執行 ALTER。要新增欄位時，開新群組。
+- **群組名稱不可和別人重複**：同名但定義不同時，後註冊的會被忽略，並在 Site Health、後台 Doctor 分頁和 `wp wpdo doctor` 顯示 `[COLLISION]`。
+
+## 4. 從 AddOn 遷移
+
+1. 在 partner 的 bridge 裡註冊和 AddOn **完全相同**的資料表與群組（直接複製 AddOn 的定義）。
+2. 部署 partner 新版，AddOn 先保持啟用。`wp wpdo doctor` 不應出現 `[COLLISION]`；兩邊定義相同時，重複註冊會被靜默忽略。
+3. 停用 AddOn。
+4. 再跑一次 `wp wpdo doctor`：資料表仍在清單中，而且不應出現 `[ORPHAN]`。如果出現，表示有群組沒有被 partner 接手；該實體是 aeav_only 時，核心會依 `wpdo_registry_meta` 暫時還原它，讓資料可以讀取，但仍應補上註冊。
+5. 確認沒有問題後，刪除 AddOn 外掛。
+
+hub、infocards、spoke 的 partner 外掛本身已經會自己註冊，AddOn 只是重複註冊；停用前照第 2 步確認沒有 `[COLLISION]` 即可。
+
+## 相關文件
+
+- `ENTITY_ADAPTER_COOKBOOK.md`：整合深度 Tier 1–3（`TMDO_API` facade、Schema Registry、自訂 adapter）。
+- `INTEGRATION_PATTERN_DECISION.md`：2026-04 的「partner 自帶 bridge」決策紀錄；本指南回到這個做法。

docs/WAF-COMPATIBILITY.md

@@ -0,0 +1,279 @@
+# WAF 相容性 — NinjaFirewall
+
+適用：2meet-data-optimizer v1.0.2+ / NinjaFirewall (WP Edition) 4.9
+
+**結論：兩者可共存，且不需要開發 AddOn。** 本文記錄實測結果、symlink 多租戶部署的必要設定、WP SaaS 的開站流程與驗證清單，以及開發時必須遵守的三條約束。
+
+> 只想開新站台的話，直接看 §3；踩到 `Cannot retrieve user options from database (#3)` 看 §2。
+
+---
+
+## 1. 兩種模式的差異
+
+NinjaFirewall 只有兩種模式（「WP+」是付費版本，不是模式）：
+
+| | WordPress WAF | Full WAF |
+|---|---|---|
+| 載入方式 | mu-plugin `0-ninjafirewall.php` | `auto_prepend_file`（`.user.ini` / php.ini） |
+| 執行時機 | WordPress 載入中 | **WordPress 載入之前** |
+| 讀設定 | `get_option('nfw_options')` | 自行解析 wp-config.php，**原生 mysqli 直查 `{prefix}options`** |
+| symlink 安全 | ✅ 站台身分由 WordPress 決定 | ❌ 自行以 `__DIR__` 推導（見 §2） |
+
+這個差異是後續所有注意事項的根源：**Full WAF 完全繞過 WordPress**，因此 TMDO 的任何 PHP 攔截器對它都不存在，但反過來，TMDO 對 `wp_options` 的**持久性**改動會影響它。
+
+---
+
+## 2. Symlink / 多租戶部署（必讀）
+
+WP SaaS 常以 symlink 共享 codebase：
+
+```
+tenant-a/wp-content/plugins -> /shared/plugins
+tenant-b/wp-content/plugins -> /shared/plugins
+```
+
+Full WAF 在 `lib/firewall.php:78` 這樣推導站台位置：
+
+```php
+$nfw_['wp_content'] = dirname(dirname(dirname( __DIR__ )));
+```
+
+**PHP 的 `__DIR__` 會解析 symlink 到真實路徑**，於是每個租戶都被判定為「共享目錄所屬的那個站」。接著 `firewall.php:120-121` 讀到錯誤的 wp-config.php、連到錯誤的資料庫，撈不到該站的 `nfw_options`，最後在 `firewall.php:613` 回傳錯誤碼 6：
+
+```
+NinjaFirewall fatal error: Cannot retrieve user options from database (#3).
+Review your installation, your site is not protected.
+```
+
+最後那句是字面意義的 —— 此時 WAF 已 `nfw_quit()`，**完全不做任何過濾**。
+
+### 解法：以 DOCUMENT_ROOT 為錨點
+
+`.htninja` 的搜尋位置是 `$_SERVER['DOCUMENT_ROOT']`（`firewall.php:47-48`），那是 web server 的 per-site 值，不受 symlink 影響。第二順位是 `dirname(DOCUMENT_ROOT)`，因此**一份檔案即可服務所有租戶**：
+
+```php
+<?php
+// 置於各站 DOCUMENT_ROOT 的共同父目錄，例如 /var/www/Studio/.htninja
+$nfw_site_root = rtrim( $_SERVER['DOCUMENT_ROOT'] ?? '', '/' );
+
+if ( '' !== $nfw_site_root && is_file( $nfw_site_root . '/wp-config.php' ) ) {
+	if ( ! defined( 'NFW_LOG_DIR' ) ) {
+		define( 'NFW_LOG_DIR', $nfw_site_root . '/wp-content' );  // firewall.php:82-83
+	}
+	$wp_config = $nfw_site_root . '/wp-config.php';                // firewall.php:120-122
+}
+
+unset( $nfw_site_root );
+```
+
+覆寫時序：`.htninja` 於 L50 載入 → `NFW_LOG_DIR` 於 L82 生效 → `NFWSESSION_DIR` 跟著 log_dir → `$wp_config` 於 L120 生效。
+
+**注意事項**
+
+- **不要在 `.htninja` 使用 `return`** —— 回傳 `'ALLOW'` / `'BLOCK'` 會改變過濾行為（`firewall.php:54-71`）。
+- `NFW_LOG_DIR` 對 **WP WAF 模式同樣重要**：`firewall.php:78` 在該模式下一樣會誤判，導致所有租戶的 firewall log、`cache/db_hash.N.php`、session 全寫進共享目錄、互相覆蓋。
+- **每個租戶的 DB 都要有自己的 `nfw_options`**。修好路徑後 WAF 會連到正確的租戶資料庫，但該站若從未啟用過 NinjaFirewall，那一列不存在，照樣 #3。開站流程必須包含啟用步驟。
+- `nfw_rules` 約 77KB、`autoload=auto`，每個租戶一份，規則更新也要逐站執行。
+- 若租戶 DB 憑證不在 wp-config.php，可改用 `firewall.php:466-470`：在 `.htninja` 設 `$GLOBALS['nfw_mysqli']` 與 `$GLOBALS['nfw_table_prefix']` 直接提供連線。代價是每 request 多一條 mysqli 連線。
+- **`.user.ini` 必須讓 php-fpm worker（通常是 www-data）可讀**，否則 `auto_prepend_file` 靜默失效、Full WAF 等同未安裝。`root:root 0640` 是常見的踩雷組合。
+
+---
+
+## 3. WP SaaS 開站流程
+
+以 symlink 共享 codebase 的多租戶環境，NinjaFirewall 的每一項設定都分成「平台層做一次」與「每站都要做」兩類。混淆這兩者是最常見的失誤來源。
+
+### 3.1 平台層（全租戶共用，只做一次）
+
+**A. 站台錨點 `.htninja`** — 見 §2。放在各站 DOCUMENT_ROOT 的共同父目錄（例如 `/var/www/Studio/.htninja`），內容以 `$_SERVER['DOCUMENT_ROOT']` 動態推導，因此一份即可服務所有租戶，新增租戶時不需修改。
+
+**B. nginx 規則** — 這是 per-site 設定檔，但內容對所有站相同，建議做成 snippet 讓各站 `include`：
+
+```nginx
+# NinjaFirewall 的 log / cache / loader 目錄。
+# 它自帶的 .htaccess 在 nginx 下完全無效，且 nginx 與 php-fpm 同為 www-data，
+# 檔案權限無法區分「WAF 寫入」與「對外 serve」，因此只能在這裡封鎖。
+# ^~ 是必要的：讓前綴匹配優先於 \.php$ 正則，否則 .php 請求會落到 PHP handler。
+location ^~ /wp-content/nfwlog/ { deny all; }
+
+# 所有 dotfile：.htaccess / .htninja / .user.ini / .env / .git ...
+# 放行 .well-known，否則 Certbot 的 ACME challenge 會失敗、憑證無法續期。
+location ~ /\.(?!well-known) { deny all; }
+```
+
+漏掉這段的後果：`nfwlog/` 下的 `readme.txt` 會被公開讀取（等於告訴掃描器這站跑 NinjaFirewall），未來的 `session/sess_*` 檔也不是 `.php`、同樣裸奔。`.php` 檔本身有雙層保護（引擎開頭的 `die('Forbidden')` + 檔內 `<?php exit; ?>`）不會外洩內容，但不該依賴它。
+
+### 3.2 每個新租戶站台（順序不可顛倒）
+
+**順序很重要**：先確保錨點與設定就緒，再安裝 Full WAF。順序顛倒會直接撞上 §2 的 `#3` 錯誤。
+
+**Step 1 — 啟用外掛，建立該站自己的設定**
+
+```bash
+wp --path=/var/www/sites/<tenant> plugin activate ninjafirewall
+wp --path=/var/www/sites/<tenant> option list --search='nfw*' --fields=option_name,autoload
+#   必須看到 nfw_options 與 nfw_rules，否則後續一定 #3
+```
+
+`nfw_options` / `nfw_rules` 存在**該租戶自己的資料庫**，不會因為 codebase 共享而自動存在。這是 `#3` 最常見的成因 —— 路徑修對了，但那個站從沒跑過 installer。
+
+**Step 2 — 確認目錄權限**
+
+php-fpm worker（通常 www-data）必須能在 `nfwlog/` 建立與寫入檔案：
+
+| 路徑 | 建議 | 理由 |
+|---|---|---|
+| `wp-content/nfwlog/` 及子目錄 | `2775` `wpdev:www-data` | setgid 確保新檔繼承 group；group 需 `w` 否則 WAF 寫不了 log |
+| `nfwlog/` 內檔案 | `664` | 同上 |
+| `nfwlog/session/` | 不用管 | 由 WAF 自建，它會用自己的嚴格權限（`0700`） |
+| `.user.ini`（裝 Full WAF 後才有） | `664` `wpdev:www-data` | www-data 需可讀，否則 auto_prepend 靜默失效 |
+
+```bash
+NFWLOG=/var/www/sites/<tenant>/wp-content/nfwlog
+sudo find "$NFWLOG" -type d -exec chmod 2775 {} +
+sudo find "$NFWLOG" -type f -exec chmod 664 {} +
+```
+
+若 `nfwlog/` 的 owner 本來就是 www-data（例如全程由後台建立），預設 `0755` 也可運作 —— owner 有寫入權。會出事的是「owner 是別人、group 只有 `r-x`」這種組合。
+
+**Step 3 — 安裝 Full WAF（從後台）**
+
+務必從 WordPress 後台操作，不要手工建檔：後台以 www-data 執行，權限天然正確；且官方安裝流程有 sandbox 驗證，會先確認 `auto_prepend_file` 真的生效才寫入設定，避免寫出讓整站 500 的 `.user.ini`。
+
+裝完立刻檢查 `.user.ini` 權限（見上表）。`root:root 0640` 是常見的踩雷組合 —— PHP 讀不到，Full WAF 等同沒裝，而表面上一切正常。
+
+**Step 4 — 套用 nginx 規則並 reload**
+
+```bash
+sudo nginx -t && sudo systemctl reload nginx
+```
+
+### 3.3 開站後驗證（每站必跑）
+
+四項缺一不可。只做前兩項會漏掉最隱蔽的失效模式。
+
+```bash
+SITE=https://<tenant>.example.com
+NFWLOG=/var/www/sites/<tenant>/wp-content/nfwlog
+
+# (1) 模式判別 —— 回 Forbidden 代表 Full WAF 生效（auto_prepend 已套用到所有 PHP 請求）
+curl -sk "$SITE/wp-content/plugins/ninjafirewall/lib/i18n.php" | head -c 9; echo
+
+# (2) 攔截能力 —— 應為 403
+curl -sk -o /dev/null -w '%{http_code}\n' "$SITE/?t=../../etc/passwd"
+
+# (3) 記錄能力 —— 最容易被漏掉的一項，log 必須增長
+before=$(stat -c%s "$NFWLOG/firewall_$(date +%Y-%m).php")
+curl -sk -o /dev/null "$SITE/?t=../../etc/passwd"
+after=$(stat -c%s "$NFWLOG/firewall_$(date +%Y-%m).php")
+[ "$after" -gt "$before" ] && echo "log OK" || echo "log FAIL — 檢查 nfwlog 權限"
+
+# (4) web 封鎖與功能未損
+for p in /wp-content/nfwlog/ /wp-content/nfwlog/readme.txt /.user.ini /.htaccess; do
+  printf "%-40s %s\n" "$p" "$(curl -sk -o /dev/null -w '%{http_code}' "$SITE$p")"   # 全部應為 403
+done
+for p in / /wp-json/ /wp-admin/; do
+  printf "%-40s %s\n" "$p" "$(curl -sk -o /dev/null -w '%{http_code}' "$SITE$p")"   # 200 / 200 / 302
+done
+```
+
+**第 (3) 項為什麼不能省**：攔截與記錄是兩件事。權限不足時 WAF 照樣回 403，但一筆記錄都寫不進去 —— 你得到一個沒有稽核軌跡的防火牆，事故調查時等於沒有。更嚴重的是同一個權限問題會讓 `session/` 建不出來，而 `wl_admin` 管理員白名單靠 `NFWSESSID` session 承載 `nfw_goodguy` 旗標，於是管理員實際上是被全規則掃描的 —— 這正是「後台操作偶爾莫名 403」的來源。
+
+### 3.4 排查時的常見誤判
+
+這幾項在實測中都出現過，全部會誤導判斷：
+
+| 現象 | 直覺結論 | 實際 |
+|---|---|---|
+| 首頁 200、後台沒有錯誤訊息 | WAF 正常 | 完全不能推論。WAF 失效時是 `nfw_quit()` 靜默放行，不擋也不記 |
+| 攻擊 payload 回 403 | Full WAF 生效 | 可能來自共享 mu-plugin 的 WP WAF。用 §3.3 第 (1) 項區分 |
+| `nfwlog/` 下的檔案回 403 | nginx 規則生效 | 也可能是 nginx 以 www-data 開不了 root-only 檔案。修好權限後會突然變 200 |
+| `/.well-known/` 回 403 | dotfile 規則誤擋了 ACME | 多半是目錄存在但 autoindex off。用實檔測：`/.well-known/acme-challenge/<file>` 若回 404（WordPress 頁面）而非 403，代表規則有正確放行 |
+| `wp-login.php` 回 404 | nginx 改壞了 | 檢查是否啟用 `wps-hide-login` 之類的登入頁隱藏外掛 |
+| `wp tmdo doctor` 全綠 | WAF 與外掛相容 | WP-CLI 完全豁免 WAF（`firewall.php:18-23`），CLI 結果不能當相容性證據，必須另外走 HTTP 驗證 |
+
+### 3.5 每租戶獨立的維運負擔
+
+symlink 共享的是 codebase，**不是設定與狀態**。以下每一項都是 per-tenant：
+
+- **`nfw_options` / `nfw_rules`** 存在各自的 `wp_options`。`nfw_rules` 約 77 KB 且 `autoload=auto`，N 個租戶就是 N 份。
+- **規則更新**要逐站執行，沒有集中派送機制。
+- **log / cache / session** 各自獨立（前提是 §2 的 `NFW_LOG_DIR` 已正確設定，否則全部寫進共享目錄互相覆蓋）。
+- **停用租戶站台時**，`nfwlog/readme.txt` 明示：解除安裝後要等 5 分鐘再刪除該目錄，否則站台可能崩潰。
+
+規劃階段就要把這些算進成本 —— 特別是「規則更新要逐站跑」這點，租戶數量上去之後需要自動化。
+
+---
+
+## 4. 開發約束（三條）
+
+### 4.1 不得重導向 WAF 的設定選項
+
+`TMDO_Options_Manager::register_settings_group()` 以 `pre_update_option_{key}` 回傳 `$old_value`，讓選項不再落地 `wp_options`。而 Full WAF 是用原生 mysqli 直查該表 —— 一旦 `nfw_options` / `nfw_rules` 被重導向，WAF 會讀不到設定而**靜默停止防護：不報錯、不寫 log**。
+
+v1.0.2 起由 `PROTECTED_OPTIONS` 常數擋下，測試見 `tests/unit/OptionsManagerProtectedTest.php`。新增任何「WordPress 載入前就會以原生 SQL 讀取 `wp_options`」的第三方元件時，必須把它的設定鍵加進該清單。
+
+**autoload 最佳化不受此限** —— `optimize_autoload()` 只改 `autoload` 欄位、不刪列，而 Full WAF 那句 `SELECT *` 不看 autoload。
+
+### 4.2 不得把 option 名稱字串放進 GET/POST
+
+規則 **322**（`lev=3`，CRITICAL）：
+
+```
+(^|\S['"])nfw_(?:options|rules)\b
+```
+
+任何 GET/POST 值含 `nfw_options` 或 `nfw_rules` 字串即 **403**（why: "Attempt to modify NinjaFirewall settings"）。
+
+這對「列出 autoload 清單讓使用者勾選清理」這類 UI 是直接的地雷 —— 而 `nfw_rules` 正好是最大的 autoload 項目之一，必然出現在清單裡。若要做這種介面，用索引或 hash 當作 POST 值，或直接走 CLI。
+
+### 4.3 不得以 base64 傳送含 SQL 語意的 payload
+
+`nfw_check_b64()`（`firewall.php:1412-1448`，`post_b64` 選項，預設開）會把每個 POST 值 base64 解碼後再比對。明文的 SQL 規則多半需要「以數字/引號開頭」或「以註解結尾」才命中，**base64 版只要「含有」就 CRITICAL 403** —— 涵蓋 `SELECT...FROM...WHERE`、`INSERT INTO`、`UNION SELECT`、`UPDATE...SET`、以及序列化物件 `O:n:"..."`。
+
+換言之，**編碼會讓事情變糟，不是變好**。硬編碼白名單只有 `fpd_print_order` 與 `g-recaptcha-response` 兩個欄位名。
+
+---
+
+## 5. 風險矩陣（實測結果）
+
+於 dev30（**Full WAF**、`wl_admin=1`、`no_restapi=0`、`admin_ajax` 未設）實測。**同一組項目在 WP WAF 模式下結果完全相同** —— 兩種模式都跑過：
+
+| 項目 | 結果 |
+|---|---|
+| `wp tmdo status` / `wp tmdo doctor` | ✅ 不受影響（CLI 豁免） |
+| `GET /wp-json/wpdo/v1/listings`（**無 cookie**） | ✅ 200，且回的是 JSON 而非 WAF 的 HTML 403 頁 |
+| `?hp_price_min=100&hp_featured=1` 動態欄位 filter | ✅ 200 |
+| 首頁 / REST 根 | ✅ 200 |
+| 後台 `/wp-admin/` | ✅ 302（導向登入） |
+| firewall log 中的 TMDO 相關攔截 | ✅ **0 筆**（log 內全部攔截皆為刻意送出的測試 payload） |
+
+最後一項是判斷相容性的核心證據：不是「沒看到錯誤」，而是逐筆檢查 firewall log 的攔截記錄，確認沒有任何一筆來自本外掛的正常操作。
+
+仍需留意的情境：
+
+| 風險 | 觸發條件 | 緩解 |
+|---|---|---|
+| Full WAF 靜默失效 | WAF 設定選項被重導向 | §4.1（已由 `PROTECTED_OPTIONS` 擋下） |
+| 規則 322 誤擋 | option 名稱字串進 GET/POST | §4.2 |
+| migration 中斷 | `run_sync_loop()` 的 110 秒同步 POST（`class-tmdo-migration-orchestrator.php:443` `set_time_limit(120)`）被代理切斷；鎖 `LOCK_TTL_SEC=1800` 才釋放 | 大站用 `force_async=true` 或走 CLI |
+| REST 回 HTML 而非 JSON | 非 administrator 角色，或以 Application Password / JWT 呼叫（無 `NFWSESSID` cookie）→ 不在 `wl_admin` 白名單。403 頁面是 HTML（`firewall.php:1585-1590`），client 端看到的是「JSON parse error」這種難查的錯 | 程式化呼叫走 CLI；或確認帶 cookie |
+| admin-ajax 被當 bot | `admin_ajax` 選項開啟時，缺 `HTTP_ACCEPT` / `Accept-Language` / UA 不含 `Mozilla` 的請求回 **404**（`firewall.php:1760-1802`） | curl / server-to-server 呼叫需帶完整 header；預設此選項未開 |
+
+**WP-CLI 完全豁免**：`firewall.php:18-23` 對 `defined('WP_CLI') && WP_CLI && PHP_SAPI === 'cli'` 直接 `return`。TMDO 全部 63 個 CLI 子命令零風險 —— 這也是 migration、snapshot restore、backfill 等重操作建議走 CLI 的另一個理由。
+
+**管理員幾乎豁免**：`wl_admin=1` 時，帶 `NFWSESSID` cookie 的 administrator 只跑 3 條規則就 `nfw_quit(20)`（`firewall.php:233-252`）。
+
+---
+
+## 6. 為什麼不需要 AddOn
+
+| 理由 | 證據 |
+|---|---|
+| 無對外 hook API | 全 codebase 零個 `apply_filters('nfw_*')` / `do_action('nfw_*')` |
+| 官方相容手段都在部署層 | `.htninja`、`exclude_waf_list` UI、wp-config 常數 —— 沒有一項是 plugin 程式碼掛得上的 |
+| 常見衝突模式在 TMDO 全不存在 | 無 loopback self-POST、無 `db.php`/`object-cache.php` drop-in、無 wp-config 改動、無 `auto_prepend` 操作、無 `$_FILES` 上傳 |
+
+NinjaFirewall 處理「合法外掛送 SQL 被擋」的官方做法是**在引擎裡硬編碼白名單**（例：`firewall.php:1434-1439` 的 JetPack 例外），需向 NinTechNet 回報才會納入，第三方無法自行擴充。
+
+因此本外掛的相容性工作全部落在**核心的三條約束**（§4）與**部署設定**（§2），沒有 AddOn 的著力點。

docs/adr-001-post-entity-source-of-truth.md

@@ -0,0 +1,85 @@
+# ADR-001: Post Entity Source-of-Truth Contract
+
+**Status:** Accepted  
+**Date:** 2026-05-15  
+**Deciders:** wpdev  
+
+---
+
+## Context
+
+Two code paths can intercept `update_post_metadata` / `add_post_metadata`:
+
+1. **TMDO_Sync_Bridge** — the original Zone interceptor that dual-writes to
+   Hot (Zone A) and Cold (Zone C) flat tables.
+2. **TMDO_Hook_Bus** — the Entity Bridge write path added in v2.9.x that writes
+   to `wp_wpdo_post_*` flat tables via Entity Registry groups.
+
+When both are active without a clear contract, a single `update_post_meta()` call
+can fan out to three distinct write paths (wp_postmeta + Zone table + entity flat
+table), producing divergent row counts and confusing `TMDO_API::trace_storage()`
+output.
+
+The defensive patch `TMDO_Sync_Bridge::is_owned_by_entity_bridge()` (v2.9.2)
+was added to prevent double-writes but left the authoritative contract undocumented.
+
+---
+
+## Decision
+
+**When `post` entity mode is `dual_write`, `shadow_read`, or `aeav_only`,
+Entity Bridge (TMDO_Hook_Bus) is the sole source of truth for keys registered
+in TMDO_Entity_Registry under the `post` entity type.**
+
+Sync_Bridge defers to Entity Bridge for those keys via `is_owned_by_entity_bridge()`:
+
+```php
+// TMDO_Sync_Bridge — intercept_update() guard:
+if ( self::is_owned_by_entity_bridge( $meta_key ) ) {
+    return $check; // pass-through — Entity Bridge owns this key
+}
+```
+
+`is_owned_by_entity_bridge()` returns `true` when both conditions hold:
+- `TMDO_Mode_Manager::writes_to_flat('post')` — mode is at least dual_write
+- `TMDO_Entity_Registry::get_field('post', $meta_key)` — key is registered
+
+Keys **not** in Entity Registry continue to be owned by Sync_Bridge (Zone path).
+
+### Invariants
+
+| Condition | Owner |
+|-----------|-------|
+| post mode = `disabled` or `idle` | wp_postmeta (no interception) |
+| post mode ≥ `dual_write` AND key in Entity Registry | **Entity Bridge** |
+| post mode ≥ `dual_write` AND key not in Entity Registry | **Sync_Bridge** (Zone) |
+| post mode = `aeav_only` | Entity Bridge for registered keys; unregistered keys fallthrough to wp_postmeta |
+
+---
+
+## Consequences
+
+**Good:**
+- Developers adding a new post meta key can determine its owner in O(1): check
+  whether the key is in `wpdo_register_fields` under `post` entity. If yes →
+  Entity Bridge owns it; if no → Zone Sync_Bridge handles it.
+- `TMDO_API::trace_storage()` output reflects this: Entity Bridge keys show the
+  flat entity table; Zone keys show the zone table.
+
+**Bad / Watch out for:**
+- A key registered in **both** Schema_Registry (Zone) and Entity_Registry (Entity
+  Bridge groups) will be captured by Entity Bridge and silently dropped by
+  Sync_Bridge. The duplicate registration is a misconfiguration — caught by
+  `TMDO_Sync_Bridge` guard and validated by `wp tmdo conflict-scan`.
+- If `TMDO_Mode_Manager` or `TMDO_Entity_Registry` are unavailable (e.g. very
+  early bootstrap), `is_owned_by_entity_bridge()` returns `false` and all writes
+  fall through to the Zone path — safe degradation.
+
+---
+
+## Related
+
+- `includes/interceptors/class-tmdo-sync-bridge.php` — `is_owned_by_entity_bridge()` (v2.9.2)
+- `includes/engine/class-tmdo-hook-bus.php` — Entity Bridge write path
+- `TMDO_API::trace_storage()` — human-readable storage path diagnostics
+- `wp tmdo conflict-scan` — detects keys registered in both paths

docs/adr-002-dual-write-naming-collision.md

@@ -0,0 +1,65 @@
+# ADR-002: Acknowledge 'dual_write' naming collision between Mode_Manager and Feature_Flags FSMs
+
+**Status:** Accepted — deferred rename  
+**Date:** 2026-05-15  
+**Deciders:** wpdev  
+
+---
+
+## Context
+
+Two distinct FSMs in the codebase both use the string `'dual_write'`:
+
+| FSM | Class | Constant | Stored in | Semantics |
+|-----|-------|----------|-----------|-----------|
+| Entity Bridge | `TMDO_Mode_Manager` | `MODE_DUAL_WRITE` | `wpdo_bridge_modes` | Writes go to both UAE flat table AND `wp_*meta` |
+| Zone Migration | `TMDO_Feature_Flags` | `STATUS_DUAL_WRITE` | `wpdo_features` | Writes go to both Zone A/B/C table AND `wp_postmeta` |
+
+The two FSMs are orthogonal — a post type can be in Zone `dual_write`
+(actively migrating) while the Entity Bridge is in `aeav_only` mode, or vice
+versa. The collision was introduced when the Entity Bridge FSM was added in
+v2.5.x alongside the pre-existing Zone Migration FSM.
+
+---
+
+## Decision
+
+**Defer the rename. Document the collision instead.**
+
+Renaming either constant (e.g. Mode_Manager → `bridge_dual`) would require:
+
+1. Updating ~85 call sites across 30+ files.
+2. Writing a DB migration to translate stored option values (`'dual_write'` →
+   `'bridge_dual'` in `wp_options['wpdo_bridge_modes']`).
+3. Updating all WP-CLI commands that accept mode strings as user input.
+4. Updating all admin UI dropdowns and confirmation messages.
+5. Handling sites that run the old code against a DB that has already been
+   migrated (or the reverse — new code on an un-migrated DB).
+
+The risk of introducing bugs via a mechanical rename outweighs the naming
+improvement at the current stage of the project.
+
+The collision is mitigated by:
+- A disambiguating docblock in `class-tmdo-mode-manager.php` (added 2026-05-15)
+- This ADR, which explains the overlap to future developers
+- The two FSMs operating on different option keys and being unreachable from
+  each other's code paths
+
+---
+
+## Consequences
+
+- **Future rename path**: When a DB migration is warranted (e.g. alongside
+  another schema change), rename `MODE_DUAL_WRITE → 'bridge_dual'` and add a
+  migration in `TMDO_Installer::maybe_upgrade()` that rewrites the stored string.
+- **Linter**: If PHPStan or a custom rule ever flags string literal comparisons
+  across FSMs, this ADR is the canonical explanation for why the overlap is
+  intentional.
+
+---
+
+## Related
+
+- `includes/engine/class-tmdo-mode-manager.php` — naming note in class docblock
+- `includes/class-tmdo-feature-flags.php` — Zone FSM (7 states)
+- P1-10 from full-review report (2026-05-15)

docs/adr-003-hot-vs-entity.md

@@ -0,0 +1,78 @@
+# ADR-003：Hot zone 與 Entity 表收斂
+
+- **狀態**：已接受（2026-09-26，選項 A）
+- **日期**：2026-09-26
+- **相關**：`BENCHMARK-SCALE.md`（O-3、O-5）、backlog PR-025〜PR-030
+
+## 背景
+
+post 的高頻欄位有兩套扁平化機制，資料可能存兩份：
+
+| | Hot zone | Entity bridge |
+|---|---|---|
+| 表 | `wp_wpdo_hot_{post_type}`（每個 post type 一張） | `wp_wpdo_post_{group}`（每個群組一張） |
+| 註冊 | `TMDO_Schema_Registry`（zone = hot） | `TMDO_Entity_Registry::register_group()` |
+| 寫入 | `TMDO_Sync_Bridge`（zone 模組進入 dual_write 後） | `TMDO_Hook_Bus`（實體 mode ≥ dual_write） |
+| 查詢改寫 | `TMDO_Query_Router`（`hot_*` 模組 cutover 後） | `TMDO_Post_Query_Router`（post mode ≥ shadow_read） |
+| 生命週期 | 每個 zone 模組 7 狀態 FSM | 每個實體 4 模式（disabled → aeav_only） |
+| 涵蓋實體 | 只有 post | post、user、term、comment |
+| 可完全取代原生 meta | 否（cutover 後原生仍保留） | 是（aeav_only） |
+| 其他 | 單欄 `indexed`、自訂 `data_type` | post_type 範圍（PR-033）、schema hash、衝突偵測、孤兒還原、回寫原生（PR-017/018/031） |
+
+Warm（瀏覽數 TTL）、Cold（JSON blob）、Archive（已刪除文章的 meta）是 Entity 沒有的能力，**不在本決策範圍**，保持原狀。
+
+## 事實
+
+**效能**（100k vendor / 1M listing，`BENCHMARK-SCALE.md`）：
+
+| 情境 | Hot | Entity |
+|---|---:|---:|
+| 價格區間搜尋 p50 | 558 ms | 652 ms |
+| 價格區間 + verified p50 | **277 ms**（有複合索引） | 337 ms |
+| vendor 名下 listing p50 | 3,405 ms（無索引） | **0.28 ms** |
+| 單筆 / 列表預載 | 相同 | 相同 |
+| 容量 | 229 MB | 379 MB |
+
+唯一 Hot 領先的是有複合索引的情境；Entity 支援複合索引後（PR-027）即可追平。
+
+**各站使用現況**（2026-09-26 唯讀查詢）：
+
+| 站 | Hot / Cold 表 | zone 模組 | post entity |
+|---|---|---|---|
+| dev20 / dev21 / dev22 | 無 | 全 idle | aeav_only（dev21 約 400 萬列） |
+| dev23 / 24 / 30 / 31 / 40 | 無 | 全 idle | disabled |
+| dev34（舊 WPDO 1.3.37） | hot_hp_listing 486、hot_hp_vendor 233 | cutover | disabled |
+| dev10 DB（舊版） | hot_hp_listing 491、hot_hp_vendor 231 | cutover | aeav_only（約 3,900 列） |
+
+- **沒有任何 2meet-DO 站在用 Hot zone**；有扁平資料的站全部走 Entity。
+- 只有兩個舊系統的站有 Hot 資料，而它們在 cutover 仍雙寫 postmeta，Hot 表只是副本（PR-022 已確認以 postmeta 為準）。
+
+**只由 Hot zone 註冊、Entity 群組沒有涵蓋的 HP 欄位**：listing / request 的 `hp_drafted`；bookings 的 `hp_start_time`、`hp_end_time`、`hp_quantity`；memberships 的 `hp_expire_period`、`hp_primary`、`hp_expired_time`。
+
+## 選項
+
+**A. 收斂到 Entity（建議）**
+post 高頻欄位只用 Entity。Hot zone 凍結：不再新增註冊，程式碼暫留只為讀取舊資料，確認沒有站使用後再移除。
+
+- 優點：一套路由、一份資料；Entity 能力是 Hot 的超集；現況已經全部在用 Entity，不需要搬資料。
+- 代價：Hot 獨有的欄位（上面那幾個）要改成新的 Entity 群組；情境 2 要靠 PR-027 的複合索引追平。
+
+**B. 兩套並存**
+維持現狀。代價是兩套寫入和查詢路徑都要維護，同一個 key 可能存兩份，O-3 之類的最佳化要做兩次。
+
+**C. 收斂到 Hot**
+不可行：Hot 只支援 post，也沒有 aeav_only、範圍宣告、回寫工具。
+
+## 建議（選項 A）的後續步驟
+
+1. **PR-026（Hot 表 bigint 索引）標為 `[!]` 不做**：沒有站在用 Hot zone。
+2. **PR-027（Entity 複合索引）照常做**：這是情境 2 追平 Hot 的方式。
+3. **新增 PR（HP AddOn）**：把 Hot 獨有的欄位改註冊成新的 Entity 群組（例如 `hp_booking_core`、`hp_membership_core`，以及 listing / request 的補充群組）；既有群組的定義不能改。
+4. **新增 PR（HP AddOn）**：HP adapter 停止註冊 hot 欄位；核心對 zone = hot 的新註冊記錄 deprecated 警告。
+5. **之後**：dev34（PR-022）和 dev10 DB（PR-023）遷出後，再評估移除 `TMDO_Zone_Hot`、`TMDO_Sync_Bridge` 的 hot 路徑與 `TMDO_Query_Router`。
+
+## 決定
+
+**選項 A：收斂到 Entity。**（使用者 2026-09-26 決定）
+
+Hot zone 凍結，依上面的後續步驟執行；backlog 已同步調整（PR-026 標為 `[!]`，新增 HP AddOn 的兩個 PR）。

docs/anti-eav-lint.yml.template

@@ -0,0 +1,63 @@
+name: Anti-EAV Strict Lint
+
+# Drop this file into each partner plugin's `.github/workflows/anti-eav-lint.yml`.
+# Required: `2meet-data-optimizer` v1.0.0+ available either via:
+#   (a) Composer dev dependency on the plugin repo, OR
+#   (b) Side-by-side checkout in the same workspace.
+
+on:
+  pull_request:
+    branches: [ main, master, develop ]
+  push:
+    branches: [ main, master ]
+
+jobs:
+  anti-eav-lint:
+    name: Anti-EAV Strict Lint (wp tmdo lint --strict)
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout this plugin
+        uses: actions/checkout@v4
+        with:
+          path: this-plugin
+
+      - name: Checkout 2meet-data-optimizer
+        uses: actions/checkout@v4
+        with:
+          repository: wpdev/2meet-data-optimizer
+          path: 2meet-data-optimizer
+          ref: v1.0.0
+
+      - name: Setup PHP 8.3
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: '8.3'
+          tools: composer:v2, wp-cli
+
+      - name: Install 2meet-data-optimizer dependencies
+        working-directory: 2meet-data-optimizer
+        run: composer install --no-interaction --no-dev --prefer-dist
+
+      - name: Bootstrap minimal WP for wp-cli
+        run: |
+          # Install a throwaway WordPress so wp-cli has runtime context.
+          wp core download --path=/tmp/wp --skip-content
+          wp config create --path=/tmp/wp --dbname=wp_lint --dbuser=root --dbpass=root --dbhost=127.0.0.1
+          # Symlink 2meet-data-optimizer into the wp-content/plugins dir so its CLI loads.
+          mkdir -p /tmp/wp/wp-content/plugins
+          ln -s "$GITHUB_WORKSPACE/2meet-data-optimizer" /tmp/wp/wp-content/plugins/2meet-data-optimizer
+
+      - name: Run wp tmdo lint --strict
+        run: |
+          cd /tmp/wp
+          wp --skip-themes --skip-plugins=all tmdo lint \
+            --plugin="$GITHUB_WORKSPACE/this-plugin" \
+            --strict \
+            --max-autoload=30
+        # Exit non-zero on:
+        # - Direct SELECT FROM wp_postmeta / wp_usermeta / wp_termmeta / wp_commentmeta
+        # - update_post_meta() on a field already registered to the TMDO Schema Registry
+        # - autoload=yes options exceeding --max-autoload (default 30)
+        # - meta_query with ≥3 conditions but no wpdo_register_fields
+        # Bypass: phpcs:ignore WPDO.AntiEAV.<rule> -- <reason>

includes/adapters/class-tmdo-adapter-comment.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/adapters/class-tmdo-adapter-post.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/adapters/class-tmdo-adapter-term.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/adapters/class-tmdo-adapter-user.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/adapters/interface-entity-adapter.php

@@ -8,6 +8,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/advisor/class-tmdo-fsm-advisor.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform diagnostic: raw meta inspection for FSM state advisor
 /**
  * TMDO_FSM_Advisor — Recommends the next FSM state per module (v2.4.0 M12).
  *
@@ -22,6 +21,10 @@
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform diagnostic: raw meta inspection for FSM state advisor
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/advisor/class-tmdo-fsm-automator.php

@@ -20,6 +20,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/advisor/class-tmdo-module-detector.php

@@ -18,6 +18,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -282,7 +284,6 @@ class TMDO_Module_Detector {
 			$active = match ( $plugin ) {
 				'hivepress'   => TMDO_Compatibility::is_hivepress_active(),
 				'woocommerce' => TMDO_Compatibility::is_woocommerce_active(),
-				'hpct'        => TMDO_Compatibility::is_hpct_active(),
 				'latepoint'   => TMDO_Compatibility::is_latepoint_active(),
 				default       => false,
 			};

includes/advisor/class-tmdo-module-rules.php

@@ -17,6 +17,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -27,52 +29,10 @@ if ( ! defined( 'ABSPATH' ) ) {
 class TMDO_Module_Rules {
 
 	/**
-	 * Default rules for the 15 known modules. Use `get()` to apply filter.
+	 * Default rules for the 8 known modules. Use `get()` to apply filter.
 	 */
 	private const DEFAULT_RULES = array(
-		// ─── HPCT modules（HivePress + HPCT）────────────────────────────
-		'reviews'         => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_review',
-			'min_post_count'     => 100,
-			'description'        => '若使用 HivePress reviews 且累積評論 ≥ 100 條，啟用後可顯著降低 listing 查詢的 JOIN 成本。',
-		),
-		'messages'        => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_message_thread',
-			'min_post_count'     => 50,
-			'description'        => 'HivePress messages 累積對話數 ≥ 50 時，啟用 module 可加速 inbox / unread count 查詢。',
-		),
-		'favorites'       => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_favorite',
-			'min_post_count'     => 200,
-			'description'        => '使用者 favorite 累積 ≥ 200 條時，啟用 module 把 favorite meta 從 wp_postmeta 搬出。',
-		),
-		'memberships'     => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_membership',
-			'min_post_count'     => 50,
-			'description'        => 'HivePress memberships 啟用且 ≥ 50 條訂閱時，membership 過期檢查會更快。',
-		),
-		'statistics'      => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_listing',
-			'min_post_count'     => 500,
-			'description'        => 'Listing ≥ 500 條時，view_count / favorite_count 等高頻統計搬到 stats module 可大幅減少 wp_postmeta 寫入。',
-		),
-		'requests'        => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_request',
-			'min_post_count'     => 50,
-			'description'        => 'HivePress requests / quotes 累積 ≥ 50 條時建議啟用。',
-		),
-		'listing_meta'    => array(
-			'compat_required'    => array( 'hivepress' ),
-			'post_type_required' => 'hp_listing',
-			'min_post_count'     => 100,
-			'description'        => '所有 listing meta 集中管理；listing ≥ 100 時可省下大量 postmeta JOIN。',
-		),
+		// ─── AddOn modules ──────────────────────────────────────────────
 		'wc_orders'       => array(
 			'compat_required'    => array( 'woocommerce' ),
 			'post_type_required' => 'shop_order',

includes/back-compat/interface-wpdo-entity-adapter-alias.php

@@ -14,6 +14,8 @@
  * @since   0.1.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/back-compat/trait-wpdo-anti-eav-aware-alias.php

@@ -14,6 +14,8 @@
  * @since   0.1.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-api.php

@@ -19,6 +19,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-back-compat.php

@@ -9,6 +9,8 @@
  * @package TMDO
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-cache-layer.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-capability.php

@@ -20,6 +20,8 @@
  * @since 2.14.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-comment-stress-tester.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
 /**
  * TMDO_Comment_Stress_Tester — Async stress fixture generator for comment entity (v2.13.1).
  *
@@ -21,6 +20,10 @@
  * @since   2.13.1
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-commentmeta-cleaner.php

@@ -20,6 +20,8 @@
  * @since   2.12.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-compatibility.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -35,8 +37,6 @@ class TMDO_Compatibility {
 		}
 
 		self::$detected = array(
-			'hpct_active'   => self::is_hpct_active(),
-			'hpct_imported' => self::is_hpct_imported(),
 			'hivepress'   => self::is_hivepress_active(),
 			'woocommerce' => self::is_woocommerce_active(),
 		);
@@ -44,48 +44,16 @@ class TMDO_Compatibility {
 		return self::$detected;
 	}
 
-	/**
-	 * Can WPDO register its HPCT-inherited module interceptors?
-	 *
-	 * True when:
-	 * - hp-custom-tables is NOT active, OR
-	 * - hp-custom-tables IS active but already imported into WPDO.
-	 */
-	public static function can_register_hpct_hooks(): bool {
-		$compat = self::check();
-
-		// HPCT not active → WPDO can freely register.
-		if ( ! $compat['hpct_active'] ) {
-			return true;
-		}
-
-		// HPCT is active but already imported → WPDO takes over.
-		if ( $compat['hpct_imported'] ) {
-			return true;
-		}
-
-		// HPCT is active and NOT imported → defer to HPCT.
-		return false;
-	}
-
 	/**
 	 * Can WPDO register zone-specific interceptors (hot/warm/cold/archive)?
 	 *
 	 * Zone interceptors are always safe to register — they operate on
-	 * WPDO's own tables and do not conflict with HPCT.
+	 * WPDO's own tables.
 	 */
 	public static function can_register_zone_hooks(): bool {
 		return true;
 	}
 
-	/**
-	 * Should WPDO show an admin notice about HPCT import?
-	 */
-	public static function should_show_hpct_notice(): bool {
-		$compat = self::check();
-		return $compat['hpct_active'] && ! $compat['hpct_imported'];
-	}
-
 	/**
 	 * Is HivePress core active?
 	 */
@@ -100,6 +68,26 @@ class TMDO_Compatibility {
 		return class_exists( 'WooCommerce' );
 	}
 
+	/**
+	 * Integrations that are active while their AddOn is not.
+	 *
+	 * Core does not know these plugins; their fields are only optimised by the
+	 * matching AddOn. The AddOn is detected by its bootstrap class, which its
+	 * main file declares as soon as the plugin loads.
+	 *
+	 * @return array<string, string> Plugin name → AddOn plugin slug.
+	 */
+	public static function missing_integration_addons(): array {
+		$missing = array();
+		if ( self::is_hivepress_active() && ! class_exists( 'TMDO_HP_Bootstrap' ) ) {
+			$missing['HivePress'] = '2meet-data-optimizer-hivepress-addon';
+		}
+		if ( self::is_woocommerce_active() && ! class_exists( 'TMDO_Woocommerce_Bootstrap' ) ) {
+			$missing['WooCommerce'] = '2meet-data-optimizer-woocommerce-addon';
+		}
+		return $missing;
+	}
+
 	/**
 	 * Is LatePoint plugin active? (v2.5.0 M16 polish — for module detector.)
 	 *
@@ -111,23 +99,4 @@ class TMDO_Compatibility {
 			|| defined( 'LATEPOINT_VERSION' )
 			|| function_exists( 'latepoint_get_settings' );
 	}
-
-	// ── Detection Methods ────────────────────────────────────────────────
-
-	/**
-	 * Is HP Custom Tables plugin active (loaded)?
-	 *
-	 * Checks for the HPCT_Loader class, which is always loaded
-	 * when hp-custom-tables is active.
-	 */
-	public static function is_hpct_active(): bool {
-		return class_exists( 'HPCT_Loader' ) || defined( 'HPCT_VERSION' );
-	}
-
-	/**
-	 * Has HPCT been imported into WPDO?
-	 */
-	private static function is_hpct_imported(): bool {
-		return (bool) get_option( 'wpdo_hpct_imported', false );
-	}
 }

includes/class-tmdo-conflict-monitor.php

@@ -18,6 +18,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-core.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -29,31 +31,10 @@ class TMDO_Core {
 		// Fire the schema registry hook so integrations can register their fields.
 		$registry = TMDO_Schema_Registry::instance();
 
-		// v2.0.x: Pre-register the 7 partner plugin integrations BEFORE firing the
-		// `wpdo_register_fields` and `wpdo_register_custom_tables` hooks. Each
-		// `register()` is a thin `add_action()` wrapper guarded by a partner-plugin
-		// `class_exists()` probe (TMDO_Infocards / Bookings / Quotation / Events /
-		// Mobile_Bridge / Collab / Playlist). Without this, partner add_actions
-		// arrive too late and the do_action below misses them — observed via
-		// 2meet-infocards 9 hp_vendor meta keys never landing in Schema Registry.
-		// register() is side-effect-free aside from add_action(), so pre-registering
-		// is provably safe (no hidden dependency on later-state global init).
-		// v2.1.3 R1 (B step): TMDO_Events removed — 2meet-events now self-registers
-		// via its own bridge class. Other partners still pre-registered here pending
-		// their own decentralized migrations (R1 continuation in v2.2.x).
-		$partner_integrations = array(
-			'TMDO_Infocards',
-			'TMDO_Bookings',
-			'TMDO_Quotation',
-			'TMDO_Mobile_Bridge',
-			'TMDO_Collab',
-			'TMDO_Playlist',
-			'TMDO_WooCommerce',
-			'TMDO_Member_Fields',
-			'TMDO_Post_Fields',
-			'TMDO_Hivepress_Term_Comment_Fields',
-		);
-		foreach ( $partner_integrations as $cls ) {
+		// Core-owned field providers register before `wpdo_register_fields` fires.
+		// AddOns wire their own integrations from their bootstraps
+		// (plugins_loaded:3 or :6), so core does not probe for them here.
+		foreach ( array( 'TMDO_Member_Fields', 'TMDO_Post_Fields' ) as $cls ) {
 			if ( class_exists( $cls ) ) {
 				call_user_func( array( $cls, 'register' ) );
 			}
@@ -72,7 +53,6 @@ class TMDO_Core {
 		// AFTER plugins_loaded:4 (e.g., partners loaded by HP modules at plugins_loaded:5+,
 		// or lazy-loaded modules booted on init:0). Schema_Registry::register() has
 		// internal dedup, so re-firing is idempotent — same partner calls won't double-register.
-		// This deprecates the need for the TMDO_Core hardcoded partner pre-registration list above.
 		//
 		// v2.1.6: also re-fire `wpdo_register_entity_fields` so partner plugins booting on
 		// plugins_loaded:20 (e.g. 2meet-spoke-sso) can register entity-based user/term/comment
@@ -91,6 +71,12 @@ class TMDO_Core {
 					if ( class_exists( 'TMDO_Custom_Table_Registry' ) ) {
 						TMDO_Custom_Table_Registry::instance()->fire_registration();
 					}
+					// Every provider has registered by now: re-register groups whose flat
+					// table still holds data but whose plugin is gone, so aeav_only
+					// values keep reading back (routing only — never DDL).
+					if ( class_exists( 'TMDO_Schema_Manager' ) && class_exists( 'TMDO_Entity_Registry' ) ) {
+						TMDO_Schema_Manager::restore_orphaned_groups();
+					}
 					if ( class_exists( 'TMDO_Schema_Manager' ) && class_exists( 'TMDO_Entity_Registry' ) ) {
 						$pending = TMDO_Entity_Registry::get_pending_schemas();
 						if ( ! empty( $pending ) ) {
@@ -109,17 +95,6 @@ class TMDO_Core {
 		// Cache Layer hooks (Zone C prefetch + save_post warming).
 		TMDO_Cache_Layer::register_hooks();
 
-		// Register HPCT-inherited module interceptors if allowed.
-		if ( TMDO_Compatibility::can_register_hpct_hooks() ) {
-			$this->register_hpct_interceptors();
-		}
-
-		// v2.1.2 fix: WC commission interceptor is independent of HPCT — writes
-		// to its own wp_wpdo_wc_commissions table. Register whenever WC is active.
-		if ( class_exists( 'TMDO_WooCommerce' ) && TMDO_WooCommerce::is_active() && class_exists( 'TMDO_WC_Orders_Interceptor' ) ) {
-			( new TMDO_WC_Orders_Interceptor() )->register_hooks();
-		}
-
 		// Zone interceptors are always safe to register.
 		if ( TMDO_Compatibility::can_register_zone_hooks() ) {
 			$this->register_zone_hooks();
@@ -134,6 +109,9 @@ class TMDO_Core {
 		// v2.0.0: boot the unified Hook Bus when explicitly enabled.
 		TMDO_Hook_Bus_Bridge::maybe_init_hook_bus();
 
+		// Keep post_status / post_date copies on post entity tables current.
+		TMDO_Post_Status_Sync::register();
+
 		// Register audit log listeners for wpdo_after_write / wpdo_after_delete.
 		if ( class_exists( 'TMDO_Audit_Logger' ) ) {
 			TMDO_Audit_Logger::init();
@@ -147,18 +125,9 @@ class TMDO_Core {
 			TMDO_Conflict_Monitor::register_hooks();
 		}
 
-		// v2.0.x: partner plugin integrations have been pre-registered earlier
-		// (see top of run() before the wpdo_register_fields do_action). Removing
-		// the duplicate late-binding block — see commit log for time-ordering bug.
-
 		// Schedule cron events.
 		$this->schedule_cron();
 
-		// Admin notice for HPCT import.
-		if ( is_admin() && TMDO_Compatibility::should_show_hpct_notice() ) {
-			add_action( 'admin_notices', array( $this, 'render_hpct_notice' ) );
-		}
-
 		// v2.6.6: async entity backfill cron handler.
 		add_action( 'wpdo_entity_backfill_batch', array( $this, 'run_entity_backfill_batch' ), 10, 2 );
 
@@ -180,14 +149,6 @@ class TMDO_Core {
 			add_action( TMDO_Comment_Stress_Tester::CRON_HOOK, array( __CLASS__, 'run_comment_stress_test_batch' ) );
 		}
 
-		// v2.11.5: HivePress per-post transient cache → wp_options reroute.
-		// Filters registered on `init` so HivePress's own bootstrap (plugins_loaded:5)
-		// runs first and our filter chain catches the actual cache writes happening
-		// during save_post and term-cache rebuilds.
-		if ( class_exists( 'TMDO_Hivepress_Transient_Filter' ) ) {
-			add_action( 'init', array( 'TMDO_Hivepress_Transient_Filter', 'init' ), 5 );
-		}
-
 		// v2.12.1: Term + Comment garbage write-time filter
 		// (silent-drop _wxr_import_* / _2meet_demo_* / orphan post-meta keys).
 		if ( class_exists( 'TMDO_Term_Comment_Garbage_Filter' ) ) {
@@ -280,218 +241,6 @@ class TMDO_Core {
 		do_action( 'wpdo_register_entity_fields', TMDO_Entity_Registry::class );
 	}
 
-	/**
-	 * Register default HivePress field mappings.
-	 *
-	 * These are the known HivePress meta_keys and their zone classifications.
-	 *
-	 * @param TMDO_Schema_Registry $registry The schema registry instance.
-	 * @return void
-	 */
-	private function register_hivepress_defaults( TMDO_Schema_Registry $registry ): void {
-		// Zone A (Hot) — Listing search/filter fields.
-		$registry->register_many(
-			'hivepress',
-			array(
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_price',
-					'zone'      => 'hot',
-					'data_type' => 'decimal(10,2) NOT NULL DEFAULT 0',
-					'column'    => 'hp_price',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_featured',
-					'zone'      => 'hot',
-					'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
-					'column'    => 'hp_featured',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_verified',
-					'zone'      => 'hot',
-					'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
-					'column'    => 'hp_verified',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_expired_time',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_expired_time',
-				),
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_featured_time',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_featured_time',
-				),
-				// Vendor hot fields.
-				array(
-					'post_type' => 'hp_vendor',
-					'meta_key'  => 'hp_verified',
-					'zone'      => 'hot',
-					'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
-					'column'    => 'hp_verified',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_vendor',
-					'meta_key'  => 'hp_hourly_rate',
-					'zone'      => 'hot',
-					'data_type' => 'decimal(10,2) NOT NULL DEFAULT 0',
-					'column'    => 'hp_hourly_rate',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_vendor',
-					'meta_key'  => 'hp_rating_count',
-					'zone'      => 'hot',
-					'data_type' => 'int(11) NOT NULL DEFAULT 0',
-					'column'    => 'hp_rating_count',
-					'indexed'   => false,
-				),
-			)
-		);
-
-		// Zone C (Cold) — Profile/display fields.
-		$registry->register_many(
-			'hivepress',
-			array(
-				array(
-					'post_type'   => 'hp_vendor',
-					'meta_key'    => 'hp_description',
-					'zone'        => 'cold',
-					'cache_group' => 'wpdo_cold_hp_vendor',
-					'cache_ttl'   => HOUR_IN_SECONDS,
-				),
-				array(
-					'post_type'   => 'hp_listing',
-					'meta_key'    => 'hp_description',
-					'zone'        => 'cold',
-					'cache_group' => 'wpdo_cold_hp_listing',
-					'cache_ttl'   => HOUR_IN_SECONDS,
-				),
-			)
-		);
-
-		// ── HivePress extension fields (filled the 47% → 94% coverage gap) ──
-		// Reviews extension (hp_review post type).
-		$registry->register_many(
-			'hivepress-reviews',
-			array(
-				array(
-					'post_type' => 'hp_review',
-					'meta_key'  => 'hp_rating',
-					'zone'      => 'hot',
-					'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
-					'column'    => 'hp_rating',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_vendor',
-					'meta_key'  => 'hp_rating',
-					'zone'      => 'hot',
-					'data_type' => 'decimal(3,2) NOT NULL DEFAULT 0',
-					'column'    => 'hp_rating',
-					'indexed'   => true,
-				),
-				array(
-					'post_type'   => 'hp_review',
-					'meta_key'    => 'hp_text',
-					'zone'        => 'cold',
-					'cache_group' => 'wpdo_cold_hp_review',
-					'cache_ttl'   => HOUR_IN_SECONDS,
-				),
-			)
-		);
-
-		// Bookings extension (hp_booking post type).
-		$registry->register_many(
-			'hivepress-bookings',
-			array(
-				array(
-					'post_type' => 'hp_booking',
-					'meta_key'  => 'hp_start_time',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_start_time',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_booking',
-					'meta_key'  => 'hp_end_time',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_end_time',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_booking',
-					'meta_key'  => 'hp_status',
-					'zone'      => 'hot',
-					'data_type' => "varchar(20) NOT NULL DEFAULT ''",
-					'column'    => 'hp_status',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_listing',
-					'meta_key'  => 'hp_booking_enabled',
-					'zone'      => 'hot',
-					'data_type' => 'tinyint(1) NOT NULL DEFAULT 0',
-					'column'    => 'hp_booking_enabled',
-					'indexed'   => true,
-				),
-			)
-		);
-
-		// Marketplace / Requests extension.
-		$registry->register_many(
-			'hivepress-marketplace',
-			array(
-				array(
-					'post_type' => 'hp_request',
-					'meta_key'  => 'hp_request_category',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_request_category',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_offer',
-					'meta_key'  => 'hp_amount',
-					'zone'      => 'hot',
-					'data_type' => 'decimal(10,2) NOT NULL DEFAULT 0',
-					'column'    => 'hp_amount',
-					'indexed'   => true,
-				),
-				array(
-					'post_type' => 'hp_offer',
-					'meta_key'  => 'hp_request',
-					'zone'      => 'hot',
-					'data_type' => 'bigint(20) NOT NULL DEFAULT 0',
-					'column'    => 'hp_request',
-					'indexed'   => true,
-				),
-			)
-		);
-	}
-
-	/**
-	 * Register HPCT-inherited module interceptors and query interceptors.
-	 */
-	private function register_hpct_interceptors(): void {
-		// 7 HPCT-era meta interceptors 已搬到 2meet-data-optimizer-hivepress-addon。
-		// 1 LatePoint interceptor 已搬到 2meet-data-optimizer-latepoint-addon。
-		// 5 query interceptors 已搬到 2meet-data-optimizer-hivepress-addon。
-		// 此方法保留為空殼以保持 ABI 相容；AddOn 各自於自身 bootstrap 內 register_hooks。
-	}
-
 	/**
 	 * Register zone-specific hooks.
 	 */
@@ -789,27 +538,6 @@ class TMDO_Core {
 		TMDO_Zone_Archive::sweep();
 	}
 
-	/**
-	 * Render admin notice when hp-custom-tables is detected but not imported.
-	 */
-	public function render_hpct_notice(): void {
-		$import_url = admin_url( 'tools.php?page=wp-data-optimizer&tab=hpct-import' );
-		?>
-		<div class="notice notice-warning is-dismissible">
-			<p>
-				<strong>WP Data Optimizer:</strong>
-				<?php
-				printf(
-					/* translators: %s: URL to import page */
-					esc_html__( 'HP Custom Tables 外掛已偵測到。請前往 %s 匯入其設定，然後停用 HP Custom Tables。', '2meet-data-optimizer' ),
-					'<a href="' . esc_url( $import_url ) . '">' . esc_html__( 'HPCT 匯入頁面', '2meet-data-optimizer' ) . '</a>'
-				);
-				?>
-			</p>
-		</div>
-		<?php
-	}
-
 	/**
 	 * WP Cron handler: process one backfill batch for an entity/group pair.
 	 *

includes/class-tmdo-crypto.php

@@ -28,6 +28,8 @@
  * @since   2.15.0 (v2 GCM, AEAD authentication)
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-custom-table-registry.php

@@ -15,6 +15,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-db.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-feature-flags.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -25,17 +27,9 @@ class TMDO_Feature_Flags {
 	private const OPTION_KEY = 'wpdo_features';
 
 	/**
-	 * All known HPCT-inherited modules.
-	 * These modules operate on existing hpct_* tables.
+	 * Modules driven by AddOn interceptors (WooCommerce commissions, LatePoint).
 	 */
-	public const HPCT_MODULES = array(
-		'reviews',
-		'messages',
-		'favorites',
-		'memberships',
-		'statistics',
-		'requests',
-		'listing_meta',
+	public const ADDON_MODULES = array(
 		'wc_orders',
 		'latepoint',
 	);
@@ -298,7 +292,7 @@ class TMDO_Feature_Flags {
 			$saved = array();
 		}
 
-		$all_modules = array_merge( self::HPCT_MODULES, self::ZONE_MODULES );
+		$all_modules = array_merge( self::ADDON_MODULES, self::ZONE_MODULES );
 		$defaults    = array_fill_keys( $all_modules, 'idle' );
 
 		self::$cache = array_merge( $defaults, $saved );
@@ -306,13 +300,13 @@ class TMDO_Feature_Flags {
 	}
 
 	/**
-	 * Return only HPCT-inherited module states.
+	 * Return only AddOn module states.
 	 *
 	 * @return array<string, string>
 	 */
-	public static function hpct_modules(): array {
+	public static function addon_modules(): array {
 		$all = self::all();
-		return array_intersect_key( $all, array_flip( self::HPCT_MODULES ) );
+		return array_intersect_key( $all, array_flip( self::ADDON_MODULES ) );
 	}
 
 	/**
@@ -324,23 +318,4 @@ class TMDO_Feature_Flags {
 		$all = self::all();
 		return array_intersect_key( $all, array_flip( self::ZONE_MODULES ) );
 	}
-
-	/**
-	 * Map an HPCT feature flag status to a WPDO state.
-	 *
-	 * Used during HPCT import to translate HPCT's 4-state model
-	 * to WPDO's 7-state model.
-	 *
-	 * @param string $hpct_status HPCT status (disabled/migrating/verified/enabled).
-	 * @return string WPDO state.
-	 */
-	public static function map_hpct_status( string $hpct_status ): string {
-		return match ( $hpct_status ) {
-			'disabled'  => 'idle',
-			'migrating' => 'backfill',
-			'verified'  => 'cutover',
-			'enabled'   => 'complete',
-			default     => 'idle',
-		};
-	}
 }

includes/class-tmdo-hook-bus-bridge.php

@@ -19,6 +19,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -52,7 +54,7 @@ final class TMDO_Hook_Bus_Bridge {
 		if ( null !== self::$cache ) {
 			return self::$cache;
 		}
-		$value       = get_option( self::OPTION, '1' );  // Default ON as of v2.5.4.
+		$value       = get_option( self::OPTION, '0' );
 		self::$cache = ( '1' === (string) $value || true === $value );
 		return self::$cache;
 	}
@@ -96,13 +98,6 @@ final class TMDO_Hook_Bus_Bridge {
 	 * @var string[]
 	 */
 	private const COEXIST_WHITELIST = array(
-		'TMDO_Reviews_Interceptor',
-		'TMDO_Messages_Interceptor',
-		'TMDO_Favorites_Interceptor',
-		'TMDO_Memberships_Interceptor',
-		'TMDO_Statistics_Interceptor',
-		'TMDO_Requests_Interceptor',
-		'TMDO_Listing_Meta_Interceptor',
 		'TMDO_WC_Orders_Interceptor',
 		'TMDO_LatePoint_Interceptor',
 		'TMDO_Sync_Bridge',

includes/class-tmdo-installer.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -38,6 +40,9 @@ class TMDO_Installer {
 	 */
 	private const SCHEMA_VERSION = '2.1.0';
 
+	/** Set once maybe_preserve_misc_bucket_default() has run for this site. */
+	public const MISC_BUCKET_DEFAULT_FLAG = 'wpdo_misc_bucket_default_v2';
+
 	/** Allowed SQL base types for hot-zone column definitions. */
 	private const ALLOWED_COL_BASE_TYPES = array(
 		'bigint',
@@ -219,47 +224,12 @@ class TMDO_Installer {
 			add_option( 'wpdo_features', array(), '', 'no' );
 		}
 
-		// v2.5.4: one-time migration — enable Hook Bus + activate user/term/comment bridge.
-		self::maybe_autoactivate_entity_bridge();
-
 		// v2.15.0: one-time crypto migration — re-encrypt v1 CBC ciphertext as
 		// v2 GCM. Idempotent best-effort: skipped if no v1 ciphertext present
 		// or if the migration flag is already set.
 		self::maybe_migrate_crypto_v1_to_v2();
 	}
 
-	/**
-	 * One-time migration: enable Hook Bus and set user/term/comment to dual_write.
-	 *
-	 * Runs once per site (guarded by wpdo_entity_bridge_autoactivated_v2 flag).
-	 * Safe: dual_write still writes native EAV — zero data-loss risk.
-	 *
-	 * @return void
-	 */
-	private static function maybe_autoactivate_entity_bridge(): void {
-		if ( get_option( 'wpdo_entity_bridge_autoactivated_v2' ) ) {
-			return;
-		}
-
-		// Enable Hook Bus.
-		update_option( 'wpdo_hook_bus_enabled', '1', false );
-
-		// Upgrade user/term/comment from disabled → dual_write.
-		$modes = get_option( 'wpdo_bridge_modes', array() );
-		if ( ! is_array( $modes ) ) {
-			$modes = array();
-		}
-		foreach ( array( 'user', 'term', 'comment' ) as $type ) {
-			if ( ! isset( $modes[ $type ] ) || 'disabled' === $modes[ $type ] ) {
-				$modes[ $type ] = 'dual_write';
-			}
-		}
-		// post entity is intentionally left alone — it uses the legacy Feature_Flags FSM.
-		update_option( 'wpdo_bridge_modes', $modes, false );
-
-		update_option( 'wpdo_entity_bridge_autoactivated_v2', '1', false );
-	}
-
 	/**
 	 * One-time best-effort crypto migration v1 (CBC) → v2 (GCM) (v2.15.0).
 	 *
@@ -297,6 +267,128 @@ class TMDO_Installer {
 		if ( get_option( 'wpdo_db_version' ) !== self::SCHEMA_VERSION ) {
 			self::install();
 		}
+		self::maybe_preserve_misc_bucket_default();
+		self::maybe_init_post_scoped_routing();
+	}
+
+	/**
+	 * One-time default for post_type-scoped entity routing.
+	 *
+	 * Autoloaded because TMDO_Entity_Registry::get_field() reads it per lookup.
+	 *
+	 * @return void
+	 */
+	public static function maybe_init_post_scoped_routing(): void {
+		global $wpdb;
+		if ( false !== get_option( TMDO_Entity_Registry::SCOPED_ROUTING_OPTION, false ) || ! class_exists( 'TMDO_Mode_Manager' ) ) {
+			return;
+		}
+
+		$has_rows = false;
+		$tables   = (array) $wpdb->get_col( $wpdb->prepare( 'SHOW TABLES LIKE %s', $wpdb->esc_like( $wpdb->prefix . 'wpdo_post_' ) . '%' ) );
+		foreach ( $tables as $table ) {
+			if ( $wpdb->get_var( "SELECT 1 FROM `{$table}` LIMIT 1" ) ) { // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- table name from SHOW TABLES.
+				$has_rows = true;
+				break;
+			}
+		}
+
+		add_option( TMDO_Entity_Registry::SCOPED_ROUTING_OPTION, self::post_scoped_routing_default( TMDO_Mode_Manager::get( 'post' ), $has_rows ), '', true );
+	}
+
+	/**
+	 * Whether post_type-scoped routing can start on right away.
+	 *
+	 * Existing post flat rows were written with legacy routing (a key shared by
+	 * several groups went to the last one registered), so they may sit in
+	 * another post type's table. Scoped lookups stay off there until the rows
+	 * are reconciled; with the post bridge disabled nothing reads them.
+	 *
+	 * @param string $post_mode          Current post entity bridge mode.
+	 * @param bool   $has_post_flat_rows Whether any wpdo_post_* table has rows.
+	 * @return string '1' to enable, '0' to wait for reconcile.
+	 */
+	public static function post_scoped_routing_default( string $post_mode, bool $has_post_flat_rows ): string {
+		return ( 'disabled' === $post_mode || ! $has_post_flat_rows ) ? '1' : '0';
+	}
+
+	/**
+	 * One-time migration for the misc bucket default flip (on → off).
+	 *
+	 * The bucket used to default to enabled; its rows are only readable while it
+	 * is on. Sites that already hold misc rows and never set the toggle get '1'
+	 * persisted so turning the default off cannot hide their data. Runs from
+	 * maybe_upgrade() rather than install() because install() only runs when
+	 * SCHEMA_VERSION changes; the flag is autoloaded since it is read per request.
+	 *
+	 * @return void
+	 */
+	public static function maybe_preserve_misc_bucket_default(): void {
+		if ( get_option( self::MISC_BUCKET_DEFAULT_FLAG ) || ! class_exists( 'TMDO_Term_Comment_Misc_Bucket' ) ) {
+			return;
+		}
+
+		$unset    = false === get_option( TMDO_Term_Comment_Misc_Bucket::OPT_ENABLED );
+		$has_rows = TMDO_Term_Comment_Misc_Bucket::count_rows( 'term' ) > 0
+			|| TMDO_Term_Comment_Misc_Bucket::count_rows( 'comment' ) > 0;
+
+		if ( $unset && $has_rows ) {
+			update_option( TMDO_Term_Comment_Misc_Bucket::OPT_ENABLED, '1', false );
+		}
+
+		update_option( self::MISC_BUCKET_DEFAULT_FLAG, '1', true );
+	}
+
+	/**
+	 * Reasons this site's wpdo_* tables cannot be dropped yet; empty means safe.
+	 *
+	 * Reads the site's own options rather than Mode_Manager / Feature_Flags,
+	 * whose per-request caches do not follow switch_to_blog() during uninstall.
+	 *
+	 * @return string[]
+	 */
+	public static function uninstall_blockers(): array {
+		global $wpdb;
+		$blockers = array();
+
+		$modes = get_option( 'wpdo_bridge_modes', array() );
+		foreach ( is_array( $modes ) ? $modes : array() as $entity => $mode ) {
+			if ( 'aeav_only' === $mode ) {
+				$blockers[] = sprintf( '%1$s 的 bridge 模式是 aeav_only：資料只存在 wpdo_%1$s_* 扁平表。', $entity );
+			}
+		}
+
+		foreach ( array( 'wpdo_term_misc', 'wpdo_comment_misc' ) as $name ) {
+			if ( self::table_has_rows( $wpdb->prefix . $name ) ) {
+				$blockers[] = sprintf( '%s 有資料：這些 term / comment meta 只存在 misc 表。', $name );
+			}
+		}
+
+		$features = get_option( 'wpdo_features', array() );
+		foreach ( TMDO_Feature_Flags::ZONE_MODULES as $module ) {
+			$state = is_array( $features ) ? ( $features[ $module ] ?? 'idle' ) : 'idle';
+			if ( in_array( $state, array( 'cleanup', 'complete' ), true ) ) {
+				$blockers[] = sprintf( '區域模組 %1$s 處於 %2$s：讀取已改走 wpdo_* 表。', $module, $state );
+			}
+		}
+
+		return $blockers;
+	}
+
+	/**
+	 * Whether a table exists and holds at least one row.
+	 *
+	 * @param string $table Full table name.
+	 * @return bool
+	 */
+	private static function table_has_rows( string $table ): bool {
+		global $wpdb;
+		// phpcs:disable WordPress.DB.DirectDatabaseQuery.DirectQuery,WordPress.DB.DirectDatabaseQuery.NoCaching,WordPress.DB.PreparedSQL.InterpolatedNotPrepared
+		if ( $table !== $wpdb->get_var( $wpdb->prepare( 'SHOW TABLES LIKE %s', $wpdb->esc_like( $table ) ) ) ) {
+			return false;
+		}
+		return null !== $wpdb->get_var( "SELECT 1 FROM `{$table}` LIMIT 1" );
+		// phpcs:enable
 	}
 
 	// ── v2.0.0 entity + audit + shadow_diffs schema (PR-2) ─────────────────
@@ -751,18 +843,11 @@ class TMDO_Installer {
 			$wpdb->prefix . 'wpdo_user_core_profile',
 			$wpdb->prefix . 'wpdo_user_social',
 			$wpdb->prefix . 'wpdo_user_commerce',
-			$wpdb->prefix . 'wpdo_user_hp_user',
 			$wpdb->prefix . 'wpdo_user_admin_prefs',
 			$wpdb->prefix . 'wpdo_post_wp_core',
 			$wpdb->prefix . 'wpdo_post_attachment',
 			$wpdb->prefix . 'wpdo_post_wc_product',
-			$wpdb->prefix . 'wpdo_post_hp_listing_core',
-			$wpdb->prefix . 'wpdo_post_hp_request_core',
-			$wpdb->prefix . 'wpdo_post_hp_vendor_core',
 			$wpdb->prefix . 'wpdo_post_nav_menu_item',
-			$wpdb->prefix . 'wpdo_hot_hp_listing',
-			$wpdb->prefix . 'wpdo_term_hp_taxonomy',
-			$wpdb->prefix . 'wpdo_comment_hp_review',
 			$wpdb->prefix . 'wpdo_term_misc',
 			$wpdb->prefix . 'wpdo_comment_misc',
 		);
@@ -1270,7 +1355,10 @@ class TMDO_Installer {
 	 */
 	private static function run_dbdelta(): void {
 		global $wpdb;
+		// Same guard as install_v2_tables(): integration tests provide a stub dbDelta().
+		if ( ! function_exists( 'dbDelta' ) ) {
 			require_once ABSPATH . 'wp-admin/includes/upgrade.php';
+		}
 
 		$charset = $wpdb->get_charset_collate();
 		$p       = $wpdb->prefix;

includes/class-tmdo-logger.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -14,6 +16,35 @@ if ( ! defined( 'ABSPATH' ) ) {
  */
 class TMDO_Logger {
 
+	/**
+	 * Request-scoped correlation id, lazily generated.
+	 *
+	 * @var string|null
+	 */
+	private static ?string $trace_id = null;
+
+	/**
+	 * Request-scoped UUIDv4 correlation id.
+	 *
+	 * Every audit row written during one request shares this value so a single
+	 * update_*_meta() call can be traced across entity groups.
+	 *
+	 * @return string UUIDv4.
+	 */
+	public static function trace_id(): string {
+		if ( null === self::$trace_id ) {
+			try {
+				$bytes = random_bytes( 16 );
+			} catch ( \Throwable $e ) {
+				$bytes = pack( 'H*', md5( (string) microtime( true ) . wp_generate_password( 16, false ) ) );
+			}
+			$bytes[6]       = chr( ( ord( $bytes[6] ) & 0x0f ) | 0x40 );
+			$bytes[8]       = chr( ( ord( $bytes[8] ) & 0x3f ) | 0x80 );
+			self::$trace_id = vsprintf( '%s%s-%s-%s-%s-%s%s%s', str_split( bin2hex( $bytes ), 4 ) );
+		}
+		return self::$trace_id;
+	}
+
 	/**
 	 * Log an INFO-level event (event-based signature, used by v2.0.0 engine code).
 	 *

includes/class-tmdo-post-shadow-verifier.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform shadow verifier: must read raw meta to verify zone correctness
 /**
  * TMDO_Post_Shadow_Verifier — Sample-and-compare flat vs wp_postmeta (v2.10.3).
  *
@@ -22,6 +21,10 @@
  * @since   2.10.3
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform shadow verifier: must read raw meta to verify zone correctness
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -300,23 +303,7 @@ final class TMDO_Post_Shadow_Verifier {
 	 * @return string|null
 	 */
 	private static function group_post_type( string $group ): ?string {
-		switch ( $group ) {
-			case 'attachment':
-				return 'attachment';
-			case 'wc_product':
-				return 'product';
-			case 'hp_listing_core':
-				return 'hp_listing';
-			case 'hp_request_core':
-				return 'hp_request';
-			case 'hp_vendor_core':
-				return 'hp_vendor';
-			case 'nav_menu_item':
-				return 'nav_menu_item';
-			case 'wp_core':
-			default:
-				return null;
-		}
+		return TMDO_Post_Fields::post_type_for_group( $group );
 	}
 
 	/**

includes/class-tmdo-post-stress-tester.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
 /**
  * TMDO_Post_Stress_Tester — Bulk fixture generator for post entity migration (v2.9.4).
  *
@@ -26,6 +25,10 @@
  * @since   2.9.4
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-postmeta-cleaner.php

@@ -19,6 +19,8 @@
  * @since   2.9.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-rest-api.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -527,7 +529,16 @@ class TMDO_REST_API {
 	 * @return WP_REST_Response REST response.
 	 */
 	public function get_listings( WP_REST_Request $request ): WP_REST_Response {
-		$post_type = $request->get_param( 'post_type' ) ?? 'hp_listing';
+		$post_type = $request->get_param( 'post_type' ) ?? self::default_post_type();
+		if ( ! post_type_exists( $post_type ) || ! is_post_type_viewable( $post_type ) ) {
+			return new WP_REST_Response(
+				array(
+					'code'    => 'rest_invalid_post_type',
+					'message' => 'Invalid post type.',
+				),
+				400
+			);
+		}
 		// Defense-in-depth: clamp per_page even if validate_callback in listings_args() fails open.
 		// Filter `wpdo_rest_max_per_page` allows site owners to adjust the upper bound.
 		$max_per_page = (int) apply_filters( 'wpdo_rest_max_per_page', 100 );
@@ -644,7 +655,7 @@ class TMDO_REST_API {
 			return $err;
 		}
 
-		$views = TMDO_Listing_Stats::get_view_count( $post_id );
+		$views = self::read_view_count( $post_id );
 
 		return new WP_REST_Response(
 			array(
@@ -728,8 +739,8 @@ class TMDO_REST_API {
 		// Mark as counted for this IP/session.
 		set_transient( $rl_key, 1, HOUR_IN_SECONDS );
 
-		TMDO_Listing_Stats::increment_view( $post_id );
-		$views = TMDO_Listing_Stats::get_view_count( $post_id );
+		self::bump_view_count( $post_id );
+		$views = self::read_view_count( $post_id );
 
 		$response = new WP_REST_Response(
 			array(
@@ -1363,6 +1374,10 @@ class TMDO_REST_API {
 	/**
 	 * Query Zone A flat table directly.
 	 *
+	 * Rows are joined to the posts table so only published posts of the
+	 * requested type are listed (the hot table also holds drafts, private
+	 * and trashed posts).
+	 *
 	 * @param string          $post_type Post type slug.
 	 * @param int             $per_page  Number of items per page.
 	 * @param int             $offset    Database offset.
@@ -1394,6 +1409,8 @@ class TMDO_REST_API {
 		}
 
 		$where_sql = $where ? 'WHERE ' . implode( ' AND ', $where ) : '';
+		$join_sql  = "INNER JOIN `{$wpdb->posts}` p ON p.ID = t.post_id AND p.post_type = %s AND p.post_status = 'publish'";
+		array_unshift( $params, $post_type );
 
 		// Validate orderby against known columns + post_id.
 		$allowed_orderby = array_merge( array( 'post_id' ), array_keys( $columns ) );
@@ -1402,16 +1419,12 @@ class TMDO_REST_API {
 
 		// Count total.
 		// phpcs:disable WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQLPlaceholders.UnfinishedPrepare,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber -- table from TMDO_Zone_Hot::table(); where_sql/orderby_col/order_dir are sanitized/validated.
-		if ( $params ) {
-			$total = (int) $wpdb->get_var( $wpdb->prepare( "SELECT COUNT(*) FROM `{$table}` {$where_sql}", ...$params ) );
-		} else {
-			$total = (int) $wpdb->get_var( "SELECT COUNT(*) FROM `{$table}`" );
-		}
+		$total = (int) $wpdb->get_var( $wpdb->prepare( "SELECT COUNT(*) FROM `{$table}` t {$join_sql} {$where_sql}", ...$params ) );
 
 		// Fetch rows.
 		$rows = $wpdb->get_results(
 			$wpdb->prepare(
-				"SELECT * FROM `{$table}` {$where_sql} ORDER BY `{$orderby_col}` {$order_dir} LIMIT %d OFFSET %d",
+				"SELECT t.* FROM `{$table}` t {$join_sql} {$where_sql} ORDER BY t.`{$orderby_col}` {$order_dir} LIMIT %d OFFSET %d",
 				...array_merge( $params, array( $per_page, $offset ) )
 			),
 			ARRAY_A
@@ -1474,8 +1487,8 @@ class TMDO_REST_API {
 				'id'        => $post->ID,
 				'post_type' => $post->post_type,
 			);
-			$cols = TMDO_Schema_Registry::instance()->get_hot_columns( $post_type );
-			foreach ( array_keys( $cols ) as $col ) {
+			// Same show_in_rest restriction as the Zone A path.
+			foreach ( TMDO_Schema_Registry::instance()->get_rest_visible_hot_columns( $post_type ) as $col ) {
 				$item[ $col ] = get_post_meta( $post->ID, $col, true );
 			}
 			$items[] = $item;
@@ -1505,7 +1518,7 @@ class TMDO_REST_API {
 			$min = $request->get_param( $col . '_min' );
 			if ( null !== $min && is_numeric( $min ) ) {
 				$filters[] = array(
-					'sql'   => "`{$col}` >= %f",
+					'sql'   => "t.`{$col}` >= %f",
 					'value' => (float) $min,
 				);
 			}
@@ -1513,7 +1526,7 @@ class TMDO_REST_API {
 			$max = $request->get_param( $col . '_max' );
 			if ( null !== $max && is_numeric( $max ) ) {
 				$filters[] = array(
-					'sql'   => "`{$col}` <= %f",
+					'sql'   => "t.`{$col}` <= %f",
 					'value' => (float) $max,
 				);
 			}
@@ -1522,12 +1535,12 @@ class TMDO_REST_API {
 			if ( null !== $exact && '' !== $exact ) {
 				if ( is_numeric( $exact ) ) {
 					$filters[] = array(
-						'sql'   => "`{$col}` = %f",
+						'sql'   => "t.`{$col}` = %f",
 						'value' => (float) $exact,
 					);
 				} else {
 					$filters[] = array(
-						'sql'   => "`{$col}` = %s",
+						'sql'   => "t.`{$col}` = %s",
 						'value' => (string) $exact,
 					);
 				}
@@ -1537,13 +1550,25 @@ class TMDO_REST_API {
 		return $filters;
 	}
 
+	/**
+	 * Post type GET /listings serves when the request names none.
+	 *
+	 * Filter `tmdo_rest_default_post_type` lets an integration (e.g. the
+	 * HivePress AddOn) make its own post type the default.
+	 *
+	 * @return string
+	 */
+	public static function default_post_type(): string {
+		return (string) apply_filters( 'tmdo_rest_default_post_type', 'post' );
+	}
+
 	/**
 	 * Argument definitions for GET /listings.
 	 */
 	private function listings_args(): array {
 		return array(
 			'post_type' => array(
-				'default'           => 'hp_listing',
+				'default'           => self::default_post_type(),
 				'sanitize_callback' => 'sanitize_key',
 			),
 			'per_page'  => array(
@@ -1640,4 +1665,37 @@ class TMDO_REST_API {
 		$result = TMDO_Migration_Orchestrator::resume();
 		return new WP_REST_Response( $result, ! empty( $result['ok'] ) ? 200 : 409 );
 	}
+
+	/**
+	 * Read a post's view counter.
+	 *
+	 * Delegates to the HivePress AddOn when it is active, because that class
+	 * adds an hp_view_count postmeta fallback for listings migrated before the
+	 * warm zone existed. Without the AddOn — the normal case for a plain
+	 * install — core reads its own warm row directly. Calling the AddOn class
+	 * unconditionally used to fatal these endpoints on any site without it.
+	 *
+	 * @param int $post_id Post ID.
+	 * @return int
+	 */
+	private static function read_view_count( int $post_id ): int {
+		if ( class_exists( 'TMDO_Listing_Stats' ) ) {
+			return (int) TMDO_Listing_Stats::get_view_count( $post_id );
+		}
+		return (int) ( TMDO_Zone_Warm::get( $post_id, TMDO_Zone_Warm::VIEW_KEY ) ?? 0 );
+	}
+
+	/**
+	 * Increment a post's view counter.
+	 *
+	 * @param int $post_id Post ID.
+	 * @return void
+	 */
+	private static function bump_view_count( int $post_id ): void {
+		if ( class_exists( 'TMDO_Listing_Stats' ) ) {
+			TMDO_Listing_Stats::increment_view( $post_id );
+			return;
+		}
+		TMDO_Zone_Warm::increment( $post_id, TMDO_Zone_Warm::VIEW_KEY, 1, TMDO_Zone_Warm::VIEW_TTL );
+	}
 }

includes/class-tmdo-routing-predicate.php

@@ -15,6 +15,8 @@
  * @since 0.2.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-safe-unserialize.php

@@ -19,6 +19,8 @@
  * @since 2.13.3
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-schema-registry.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -65,6 +67,13 @@ class TMDO_Schema_Registry {
 	 */
 	private array $warm_fields = array();
 
+	/**
+	 * Providers already told the Hot zone is frozen (once per request).
+	 *
+	 * @var array<string, true>
+	 */
+	private array $hot_deprecation_flagged = array();
+
 	/**
 	 * Private constructor — use instance() to get the singleton.
 	 */
@@ -136,6 +145,7 @@ class TMDO_Schema_Registry {
 		switch ( $config['zone'] ) {
 			case 'hot':
 				$this->hot_columns[ $config['post_type'] ][ $config['column'] ] = $config['data_type'];
+				$this->flag_hot_deprecation( $provider, $config['meta_key'] );
 				break;
 
 			case 'warm':
@@ -143,11 +153,43 @@ class TMDO_Schema_Registry {
 				break;
 
 			case 'cold':
+				// 去重：hot 以 column 為 key、warm 以 meta_key 為 key，兩者天生冪等；
+				// 唯獨 cold 是 append，重複註冊會無限膨脹。而 `wpdo_register_fields`
+				// 本來就會被 fire 多次（core plugins_loaded:4 + late-bind safety net :30），
+				// 加上主外掛與 AddOn 可能同時註冊同一批欄位，實測曾出現同一 key 重複 4 次。
+				if ( ! isset( $this->cold_fields[ $config['post_type'] ] ) ) {
+					$this->cold_fields[ $config['post_type'] ] = array();
+				}
+				if ( ! in_array( $config['meta_key'], $this->cold_fields[ $config['post_type'] ], true ) ) {
 					$this->cold_fields[ $config['post_type'] ][] = $config['meta_key'];
+				}
 				break;
 		}
 	}
 
+	/**
+	 * The Hot zone is frozen (ADR-003): fields still register so existing hot
+	 * data stays readable, but each provider gets one notice per request.
+	 *
+	 * @param string $provider Provider name.
+	 * @param string $meta_key First hot meta_key seen from it.
+	 */
+	private function flag_hot_deprecation( string $provider, string $meta_key ): void {
+		if ( isset( $this->hot_deprecation_flagged[ $provider ] ) ) {
+			return;
+		}
+		$this->hot_deprecation_flagged[ $provider ] = true;
+		_doing_it_wrong(
+			__CLASS__ . '::register',
+			sprintf(
+				'Provider "%1$s" registered Hot zone field "%2$s". The Hot zone is frozen; register an entity group (TMDO_Entity_Registry::register_group) instead.',
+				esc_html( $provider ),
+				esc_html( $meta_key )
+			),
+			esc_html( TMDO_VERSION )
+		);
+	}
+
 	/**
 	 * Bulk register multiple fields.
 	 *

includes/class-tmdo-sqlite-compat.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-term-comment-backfill.php

@@ -46,6 +46,8 @@
  * @since   2.12.6
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -58,20 +60,22 @@ if ( ! defined( 'ABSPATH' ) ) {
 final class TMDO_Term_Comment_Backfill {
 
 	/**
-	 * Group → flat table suffix mapping. Mirror of TMDO_Hivepress_Term_Comment_Fields.
+	 * Term and comment groups registered in the entity registry.
 	 *
-	 * @var array<string, array{entity_type:string, table_suffix:string}>
+	 * @return array<string, string> Group name → entity type ('term' | 'comment').
 	 */
-	private const GROUP_MAP = array(
-		'hp_taxonomy' => array(
-			'entity_type'  => 'term',
-			'table_suffix' => 'wpdo_term_hp_taxonomy',
-		),
-		'hp_review'   => array(
-			'entity_type'  => 'comment',
-			'table_suffix' => 'wpdo_comment_hp_review',
-		),
-	);
+	public static function registered_groups(): array {
+		$groups = array();
+		if ( ! class_exists( 'TMDO_Entity_Registry' ) ) {
+			return $groups;
+		}
+		foreach ( array( 'term', 'comment' ) as $entity_type ) {
+			foreach ( TMDO_Entity_Registry::get_groups_for_type( $entity_type ) as $group ) {
+				$groups[ $group ] = $groups[ $group ] ?? $entity_type;
+			}
+		}
+		return $groups;
+	}
 
 	/**
 	 * Run backfill for every registered term + comment group.
@@ -81,8 +85,8 @@ final class TMDO_Term_Comment_Backfill {
 	 */
 	public static function backfill_all( bool $dry_run = false ): array {
 		$results = array();
-		foreach ( self::GROUP_MAP as $group_name => $cfg ) {
-			$results[ $group_name ] = self::backfill_group( $cfg['entity_type'], $group_name, $dry_run );
+		foreach ( self::registered_groups() as $group_name => $entity_type ) {
+			$results[ $group_name ] = self::backfill_group( $entity_type, $group_name, $dry_run );
 		}
 		return $results;
 	}
@@ -108,7 +112,7 @@ final class TMDO_Term_Comment_Backfill {
 			$result['error'] = 'Entity Registry unavailable';
 			return $result;
 		}
-		if ( ! isset( self::GROUP_MAP[ $group_name ] ) ) {
+		if ( ( self::registered_groups()[ $group_name ] ?? null ) !== $entity_type ) {
 			$result['error'] = "Unknown group: {$group_name}";
 			return $result;
 		}
@@ -138,7 +142,7 @@ final class TMDO_Term_Comment_Backfill {
 			return $result;
 		}
 
-		$flat_table = $wpdb->prefix . self::GROUP_MAP[ $group_name ]['table_suffix'];
+		$flat_table = TMDO_Schema_Manager::get_table_name( $entity_type, $group_name );
 
 		// Count candidate entities — those with at least one of the registered keys in wp_*meta.
 		$placeholders         = implode( ',', array_fill( 0, count( $keys ), '%s' ) );

includes/class-tmdo-term-comment-shadow-verifier.php

@@ -22,6 +22,8 @@
  * @since   2.12.5
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -39,23 +41,6 @@ final class TMDO_Term_Comment_Shadow_Verifier {
 	/** Default sample size per entity per cron tick. */
 	public const DEFAULT_SAMPLE_SIZE = 100;
 
-	/**
-	 * Group → flat table suffix mapping. Keep in sync with
-	 * TMDO_Hivepress_Term_Comment_Fields registrations and the misc bucket.
-	 *
-	 * @var array<string, array{entity_type:string, table_suffix:string, has_misc:bool}>
-	 */
-	private const GROUP_MAP = array(
-		'hp_taxonomy' => array(
-			'entity_type'  => 'term',
-			'table_suffix' => 'wpdo_term_hp_taxonomy',
-		),
-		'hp_review'   => array(
-			'entity_type'  => 'comment',
-			'table_suffix' => 'wpdo_comment_hp_review',
-		),
-	);
-
 	/**
 	 * Run a sample-compare pass for a single entity group.
 	 *
@@ -213,11 +198,7 @@ final class TMDO_Term_Comment_Shadow_Verifier {
 			return;
 		}
 
-		global $wpdb;
-
-		foreach ( self::GROUP_MAP as $group => $cfg ) {
-			$entity_type = $cfg['entity_type'];
-
+		foreach ( TMDO_Term_Comment_Backfill::registered_groups() as $group => $entity_type ) {
 			// Only run when the entity is in shadow_read mode.
 			if ( 'term' === $entity_type && ! $term_shadow ) {
 				continue;
@@ -230,7 +211,7 @@ final class TMDO_Term_Comment_Shadow_Verifier {
 			if ( empty( $keys ) ) {
 				continue;
 			}
-			$flat_table = $wpdb->prefix . $cfg['table_suffix'];
+			$flat_table = TMDO_Schema_Manager::get_table_name( $entity_type, $group );
 
 			try {
 				self::sample_compare( $entity_type, $group, $flat_table, $keys, self::DEFAULT_SAMPLE_SIZE );
@@ -335,16 +316,14 @@ final class TMDO_Term_Comment_Shadow_Verifier {
 			return array();
 		}
 
-		global $wpdb;
 		$out = array();
 
-		foreach ( self::GROUP_MAP as $group => $cfg ) {
-			$entity_type = $cfg['entity_type'];
+		foreach ( TMDO_Term_Comment_Backfill::registered_groups() as $group => $entity_type ) {
 			$keys = TMDO_Entity_Registry::get_group_keys( $entity_type, $group );
 			if ( empty( $keys ) ) {
 				continue;
 			}
-			$flat_table = $wpdb->prefix . $cfg['table_suffix'];
+			$flat_table = TMDO_Schema_Manager::get_table_name( $entity_type, $group );
 
 			try {
 				$out[ $group ] = self::sample_compare( $entity_type, $group, $flat_table, $keys, $sample_size );

includes/class-tmdo-term-stress-tester.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
 /**
  * TMDO_Term_Stress_Tester — Async stress fixture generator for term entity (v2.13.0).
  *
@@ -22,6 +21,10 @@
  * @since   2.13.0
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-termmeta-cleaner.php

@@ -20,6 +20,8 @@
  * @since   2.12.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-user-stress-tester.php

@@ -1,5 +1,4 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
 /**
  * TMDO_User_Stress_Tester — User entity 壓力測試 / Benchmark 工具
  *
@@ -16,6 +15,10 @@
  * @since   2.6.7
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform stress tester: intentional raw meta SQL for baseline comparison
+
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,WordPress.DB.PreparedSQLPlaceholders.UnfinishedPrepare,Generic.CodeAnalysis.UnusedFunctionParameter,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.PHP.YodaConditions,WordPress.WP.AlternativeFunctions.rand_mt_rand,WordPress.PHP.DiscouragedPHPFunctions.serialize_serialize -- 測試工具：mt_rand 用於杜撰測試資料；serialize() 為 WP capabilities 標準格式
 
 defined( 'ABSPATH' ) || exit;

includes/class-tmdo-v2-upgrader.php

@@ -21,6 +21,8 @@
  * @since   2.0.0
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/class-tmdo-zone-classifier.php

@@ -5,6 +5,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/diagnostic/class-tmdo-health-cron.php

@@ -21,6 +21,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/diagnostic/class-tmdo-monthly-summary.php

@@ -17,6 +17,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/diagnostic/class-tmdo-site-health.php

@@ -1,9 +1,8 @@
 <?php
-// phpcs:ignore WPDO.AntiEAV -- platform diagnostic: raw meta inspection for site health
 /**
  * TMDO_Site_Health — WordPress Site Health integration (v2.2.0 M3).
  *
- * Registers 7 tests under Tools → Site Health → Status:
+ * Registers 10 tests under Tools → Site Health → Status:
  *   1. wpdo_schema_drift          (critical)
  *   2. wpdo_error_budget          (recommended)
  *   3. wpdo_hook_conflicts        (recommended)
@@ -11,12 +10,19 @@
  *   5. wpdo_postmeta_explosion    (recommended)
  *   6. wpdo_orphan_zone_rows      (recommended)
  *   7. wpdo_missing_snapshot      (critical)
+ *   8. wpdo_entity_group_collisions (recommended)
+ *   9. wpdo_orphaned_entity_groups  (recommended)
+ *  10. wpdo_missing_integration_addons (recommended)
  *
  * Each test result is cached for 5 minutes to keep Site Health responsive.
  *
  * @package WP_Data_Optimizer
  */
 
+// phpcs:ignore WPDO.AntiEAV -- platform diagnostic: raw meta inspection for site health
+
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }
@@ -38,6 +44,9 @@ class TMDO_Site_Health {
 		'wpdo_postmeta_explosion'         => 'check_postmeta_explosion',
 		'wpdo_orphan_zone_rows'           => 'check_orphan_zone_rows',
 		'wpdo_missing_snapshot'           => 'check_missing_snapshot',
+		'wpdo_entity_group_collisions'    => 'check_entity_group_collisions',
+		'wpdo_orphaned_entity_groups'     => 'check_orphaned_entity_groups',
+		'wpdo_missing_integration_addons' => 'check_missing_integration_addons',
 	);
 
 	/**
@@ -50,7 +59,7 @@ class TMDO_Site_Health {
 	}
 
 	/**
-	 * Register the 7 tests with WP Site Health.
+	 * Register the 10 tests with WP Site Health.
 	 *
 	 * @param array $tests Existing tests.
 	 * @return array
@@ -80,6 +89,9 @@ class TMDO_Site_Health {
 			'wpdo_postmeta_explosion'         => __( 'WPDO postmeta explosion', '2meet-data-optimizer' ),
 			'wpdo_orphan_zone_rows'           => __( 'WPDO orphan zone rows', '2meet-data-optimizer' ),
 			'wpdo_missing_snapshot'           => __( 'WPDO missing snapshot', '2meet-data-optimizer' ),
+			'wpdo_entity_group_collisions'    => __( 'WPDO entity group collisions', '2meet-data-optimizer' ),
+			'wpdo_orphaned_entity_groups'     => __( 'WPDO orphaned entity groups', '2meet-data-optimizer' ),
+			'wpdo_missing_integration_addons' => __( 'WPDO integrations without their AddOn', '2meet-data-optimizer' ),
 		);
 		return $map[ $key ] ?? $key;
 	}
@@ -422,6 +434,118 @@ class TMDO_Site_Health {
 
 	// ─── helpers ──────────────────────────────────────────────────────────
 
+	// ─── Test 8: Entity group name collisions ───────────────────────────
+
+	/**
+	 * Report entity groups registered twice with different definitions.
+	 *
+	 * Not cached: the collision list is in-memory state rebuilt on every
+	 * request, so reading it is free and a transient would only go stale.
+	 *
+	 * @return array<string, mixed> Site Health result.
+	 */
+	public static function check_entity_group_collisions(): array {
+		$collisions = class_exists( 'TMDO_Entity_Registry' ) ? TMDO_Entity_Registry::get_collisions() : array();
+		if ( empty( $collisions ) ) {
+			return self::wrap( 'wpdo_entity_group_collisions', self::pass( __( 'No entity group name collisions.', '2meet-data-optimizer' ) ) );
+		}
+		$lines = array();
+		foreach ( $collisions as $c ) {
+			$lines[] = sprintf(
+				'%s/%s (+%s −%s ~%s)',
+				$c['entity_type'],
+				$c['group'],
+				implode( ',', $c['added'] ) ?: '-',
+				implode( ',', $c['removed'] ) ?: '-',
+				implode( ',', $c['changed'] ) ?: '-'
+			);
+		}
+		return self::wrap(
+			'wpdo_entity_group_collisions',
+			self::fail(
+				__( 'WPDO entity group name collisions', '2meet-data-optimizer' ),
+				sprintf(
+					/* translators: %s: list of entity/group names with field differences */
+					__( 'Another plugin registered these groups with a different field list; its definition was ignored and the first one kept: %s', '2meet-data-optimizer' ),
+					implode( '; ', $lines )
+				),
+				'recommended'
+			)
+		);
+	}
+
+	// ─── Test 9: Orphaned entity groups ─────────────────────────────────
+
+	/**
+	 * Report flat-table groups kept alive from wpdo_registry_meta because no
+	 * active plugin registers them any more.
+	 *
+	 * Not cached for the same reason as check_entity_group_collisions().
+	 *
+	 * @return array<string, mixed> Site Health result.
+	 */
+	public static function check_orphaned_entity_groups(): array {
+		$restored = class_exists( 'TMDO_Entity_Registry' ) ? TMDO_Entity_Registry::get_restored_groups() : array();
+		if ( empty( $restored ) ) {
+			return self::wrap( 'wpdo_orphaned_entity_groups', self::pass( __( 'Every flat-table group is registered by an active plugin.', '2meet-data-optimizer' ) ) );
+		}
+		$lines = array();
+		foreach ( $restored as $r ) {
+			$lines[] = sprintf(
+				'%s/%s (%d fields%s%s)',
+				$r['entity_type'],
+				$r['group'],
+				$r['fields'],
+				$r['skipped'] ? ', skipped: ' . implode( ',', $r['skipped'] ) : '',
+				$r['native'] ? ', left on native meta (newer data there): ' . implode( ',', $r['native'] ) : ''
+			);
+		}
+		return self::wrap(
+			'wpdo_orphaned_entity_groups',
+			self::fail(
+				__( 'WPDO entity groups restored from stored definitions', '2meet-data-optimizer' ),
+				sprintf(
+					/* translators: %s: list of entity/group names */
+					__( 'No active plugin registers these groups, so their stored definitions were re-applied to keep the flat-table data readable. Reactivate the owning plugin, or write the data back to native meta before removing it: %s', '2meet-data-optimizer' ),
+					implode( '; ', $lines )
+				),
+				'recommended'
+			)
+		);
+	}
+
+	// ─── Test 10: Integrations without their AddOn ──────────────────────
+
+	/**
+	 * Report HivePress / WooCommerce running while their AddOn is inactive.
+	 *
+	 * Not cached: two class_exists() probes.
+	 *
+	 * @return array<string, mixed> Site Health result.
+	 */
+	public static function check_missing_integration_addons(): array {
+		$missing = class_exists( 'TMDO_Compatibility' ) ? TMDO_Compatibility::missing_integration_addons() : array();
+		if ( empty( $missing ) ) {
+			return self::wrap( 'wpdo_missing_integration_addons', self::pass( __( 'Every detected integration has its AddOn active.', '2meet-data-optimizer' ) ) );
+		}
+		$lines = array();
+		foreach ( $missing as $plugin => $addon ) {
+			$lines[] = "{$plugin} → {$addon}";
+		}
+		return self::wrap(
+			'wpdo_missing_integration_addons',
+			self::fail(
+				__( 'WPDO integrations running without their AddOn', '2meet-data-optimizer' ),
+				sprintf(
+					/* translators: %s: "Plugin → AddOn" pairs */
+					__( 'These plugins are active but their AddOn is not, so their fields are not optimised: %s. Activate the AddOn.', '2meet-data-optimizer' ),
+					implode( '; ', $lines )
+				),
+				'recommended'
+			)
+		);
+	}
+
 	/**
 	 * Wrap a raw check result with required Site Health envelope fields.
 	 *

includes/diagnostic/class-tmdo-site-metrics-collector.php

@@ -19,6 +19,8 @@
  * @since   2.6.2
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }

includes/engine/class-tmdo-audit-logger.php

@@ -17,6 +17,8 @@
  * @since   1.3.0
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-auto-promoter.php

@@ -20,6 +20,8 @@
  * @since   1.5.0
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-cache-orchestrator.php

@@ -10,6 +10,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-conflict-detector.php

@@ -19,6 +19,8 @@
  * @since   1.1.2
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-entity-health.php

@@ -14,6 +14,8 @@
  * @since   2.6.6
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions -- inherits engine coding standard.
 
 defined( 'ABSPATH' ) || exit;

includes/engine/class-tmdo-entity-migration-engine.php

@@ -14,6 +14,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-entity-registry.php

@@ -10,6 +10,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 
@@ -29,6 +31,24 @@ final class TMDO_Entity_Registry {
 	/** @var array<int, array{type:string, group:string, fields:array}> 待建表的 Schema 清單 */
 	private static array $pending_schemas = array();
 
+	/** @var array<string, array<string, array<string, mixed>>> 實體類型 → meta_key → 欄位定義（僅未限定 post_type 的群組）*/
+	private static array $unscoped_index = array();
+
+	/** @var array<string, array<string, array<string, array<string, mixed>>>> 實體類型 → post_type → meta_key → 欄位定義 */
+	private static array $scoped_index = array();
+
+	/** @var array<string, array<string, string[]>> 實體類型 → 群組名 → 限定的 post_type */
+	private static array $scopes = array();
+
+	/** @var array<string, array<string, array<string, string[]>>> 實體類型 → 群組名 → 索引名 → 欄位 key */
+	private static array $indexes = array();
+
+	/** @var array<string, array<string, mixed>> "entity/group" → 同名群組以不同定義重複註冊的紀錄 */
+	private static array $collisions = array();
+
+	/** @var array<string, array<string, mixed>> "entity/group" → 從 wpdo_registry_meta 還原的孤兒群組 */
+	private static array $restored = array();
+
 	/** 合法的欄位型別 */
 	public const VALID_TYPES = array(
 		'text',
@@ -47,11 +67,20 @@ final class TMDO_Entity_Registry {
 	/** 合法的實體類型 */
 	public const VALID_ENTITY_TYPES = array( 'post', 'user', 'term', 'comment' );
 
+	/** Option：'1' 時 get_field() 依傳入的 post_type 解析（見 get_field()）。 */
+	public const SCOPED_ROUTING_OPTION = 'tmdo_post_scoped_routing';
+
 	public static function init(): void {
 		self::$adapters        = array();
 		self::$groups          = array();
 		self::$field_index     = array();
+		self::$unscoped_index  = array();
+		self::$scoped_index    = array();
+		self::$scopes          = array();
+		self::$indexes         = array();
 		self::$pending_schemas = array();
+		self::$collisions      = array();
+		self::$restored        = array();
 	}
 
 	// ─────────────────────────────────────────────────────────
@@ -90,10 +119,17 @@ final class TMDO_Entity_Registry {
 	 *                            - unique (bool) 唯一索引
 	 *                            - options (array) enum 選項
 	 *                            - label (string) 顯示名稱
+	 * @param array<string, mixed>  $args        選填：post_types (string[]) — 群組只套用於這些 post_type。
+	 *                            多個群組共用 meta_key 時，依 post 本身的類型決定歸屬；
+	 *                            不屬於任何宣告 post_type 的 post 不受管理（走原生 meta）。
+	 *                            不列入欄位定義，所以不影響 schema hash 與衝突比對。
+	 *                            indexes (array<string, string[]>) — 複合索引：名稱 → 欄位 key（依序）；
+	 *                            含未知欄位的索引會被略過。同樣不影響 schema hash，
+	 *                            由 TMDO_Schema_Manager::ensure_group_indexes() 補建到既有表。
 	 *
 	 * @return bool
 	 */
-	public static function register_group( string $entity_type, string $group_name, array $fields ): bool {
+	public static function register_group( string $entity_type, string $group_name, array $fields, array $args = array() ): bool {
 
 		if ( ! in_array( $entity_type, self::VALID_ENTITY_TYPES, true ) ) {
 			return false;
@@ -103,12 +139,54 @@ final class TMDO_Entity_Registry {
 			return false;
 		}
 
-		// 防重複登錄
-		if ( isset( self::$groups[ $entity_type ][ $group_name ] ) ) {
+		$normalized = self::normalize_fields( $entity_type, $group_name, $fields );
+
+		if ( empty( $normalized ) ) {
 			return false;
 		}
 
-		// 驗證並正規化欄位定義
+		// 防重複登錄：相同定義（init:1 重新觸發）靜默略過；定義不同則記錄衝突，保留先註冊者。
+		if ( isset( self::$groups[ $entity_type ][ $group_name ] ) ) {
+			if ( self::$groups[ $entity_type ][ $group_name ] !== $normalized ) {
+				self::record_collision( $entity_type, $group_name, self::$groups[ $entity_type ][ $group_name ], $normalized );
+			}
+			return false;
+		}
+
+		// 建立索引以供快速查詢
+		$post_types = array_values( array_filter( array_map( 'strval', (array) ( $args['post_types'] ?? array() ) ) ) );
+		if ( $post_types ) {
+			self::$scopes[ $entity_type ][ $group_name ] = $post_types;
+		}
+		$keys = array_column( $normalized, 'key' );
+		foreach ( (array) ( $args['indexes'] ?? array() ) as $index_name => $columns ) {
+			$columns = array_values( array_map( 'strval', (array) $columns ) );
+			if ( $columns && ! array_diff( $columns, $keys ) ) {
+				self::$indexes[ $entity_type ][ $group_name ][ (string) $index_name ] = $columns;
+			}
+		}
+		foreach ( $normalized as $normalized_field ) {
+			self::index_field( $entity_type, $normalized_field, $post_types );
+		}
+
+		self::$groups[ $entity_type ][ $group_name ] = $normalized;
+
+		// 加入待建表佇列
+		self::$pending_schemas[] = array(
+			'type'   => $entity_type,
+			'group'  => $group_name,
+			'fields' => $normalized,
+		);
+
+		return true;
+	}
+
+	/**
+	 * 驗證並正規化欄位定義（略過缺 key/type 或型別不合法者）。
+	 * @param array<int, array<string, mixed>> $fields
+	 * @return array<int, array<string, mixed>>
+	 */
+	private static function normalize_fields( string $entity_type, string $group_name, array $fields ): array {
 		$normalized = array();
 
 		foreach ( $fields as $field ) {
@@ -139,27 +217,148 @@ final class TMDO_Entity_Registry {
 			$normalized_field['entity_type'] = $entity_type;
 
 			$normalized[] = $normalized_field;
-
-			// 建立索引以供快速查詢
-			self::$field_index[ $entity_type ][ $normalized_field['key'] ] = $normalized_field;
 		}
 
-		if ( empty( $normalized ) ) {
+		return $normalized;
+	}
+
+	/**
+	 * 還原孤兒群組：依 wpdo_registry_meta 保存的定義重新登錄，只供讀寫路由用。
+	 *
+	 * 與 register_group() 的差異：不進 pending_schemas（絕不觸發 DDL），且已被
+	 * 其他存活群組管理的 key 一律略過，不覆蓋。$native_keys 列出原生 meta 仍有
+	 * 資料的 key：那些值比扁平表新（孤兒期間寫入），必須留在原生 meta。
+	 *
+	 * @param string[] $native_keys 原生 meta 仍有資料、不可還原的 key。
+	 * @return bool 有登錄任何欄位時為 true
+	 * @param array<int, array<string, mixed>> $fields
+	 */
+	public static function restore_group( string $entity_type, string $group_name, array $fields, array $native_keys = array() ): bool {
+		if ( ! isset( self::$adapters[ $entity_type ] ) || isset( self::$groups[ $entity_type ][ $group_name ] ) ) {
 			return false;
 		}
 
-		self::$groups[ $entity_type ][ $group_name ] = $normalized;
+		$kept    = array();
+		$skipped = array();
+		$native  = array();
+		foreach ( self::normalize_fields( $entity_type, $group_name, $fields ) as $field ) {
+			if ( isset( self::$field_index[ $entity_type ][ $field['key'] ] ) ) {
+				$skipped[] = (string) $field['key'];
+				continue;
+			}
+			if ( in_array( $field['key'], $native_keys, true ) ) {
+				$native[] = (string) $field['key'];
+				continue;
+			}
+			$kept[] = $field;
+		}
 
-		// 加入待建表佇列
-		self::$pending_schemas[] = array(
-			'type'   => $entity_type,
+		$id = $entity_type . '/' . $group_name;
+		if ( empty( $kept ) ) {
+			// 整組都留在原生 meta 時仍要回報：扁平表的舊資料需要人工處理。
+			if ( $native ) {
+				self::$restored[ $id ] = array(
+					'entity_type' => $entity_type,
 					'group'       => $group_name,
-			'fields' => $normalized,
+					'fields'      => 0,
+					'skipped'     => $skipped,
+					'native'      => $native,
+				);
+			}
+			return false;
+		}
+
+		foreach ( $kept as $field ) {
+			self::index_field( $entity_type, $field, array() );
+		}
+		self::$groups[ $entity_type ][ $group_name ] = $kept;
+
+		self::$restored[ $id ] = array(
+			'entity_type' => $entity_type,
+			'group'       => $group_name,
+			'fields'      => count( $kept ),
+			'skipped'     => $skipped,
+			'native'      => $native,
 		);
 
 		return true;
 	}
 
+	/**
+	 * 把欄位加入索引。field_index 保留舊語意（整個實體共用、後註冊者覆蓋），
+	 * 供不帶 post_type 的查詢使用；另外依是否限定 post_type 分別建索引。
+	 *
+	 * @param string[] $post_types 群組限定的 post_type；空陣列表示不限定。
+	 * @param array<string, mixed> $field
+	 */
+	private static function index_field( string $entity_type, array $field, array $post_types ): void {
+		self::$field_index[ $entity_type ][ $field['key'] ] = $field;
+
+		if ( empty( $post_types ) ) {
+			self::$unscoped_index[ $entity_type ][ $field['key'] ] = $field;
+			return;
+		}
+		foreach ( $post_types as $post_type ) {
+			self::$scoped_index[ $entity_type ][ $post_type ][ $field['key'] ] = $field;
+		}
+	}
+
+	/**
+	 * 本請求從 wpdo_registry_meta 還原的孤兒群組。
+	 *
+	 * @return array<int, array{entity_type:string, group:string, fields:int, skipped:string[], native:string[]}>
+	 */
+	public static function get_restored_groups(): array {
+		return array_values( self::$restored );
+	}
+
+	/**
+	 * 記錄同名群組衝突（每個 entity/group 每請求一筆），並寫入 warning。
+	 *
+	 * 註冊每個請求都會跑，warning 以 transient 節流為每天一次，避免灌爆 wpdo_errors。
+	 * @param array<int, array<string, mixed>> $existing
+	 * @param array<int, array<string, mixed>> $incoming
+	 */
+	private static function record_collision( string $entity_type, string $group_name, array $existing, array $incoming ): void {
+		$id = $entity_type . '/' . $group_name;
+		if ( isset( self::$collisions[ $id ] ) ) {
+			return;
+		}
+
+		$old = array_column( $existing, null, 'key' );
+		$new = array_column( $incoming, null, 'key' );
+
+		$changed = array();
+		foreach ( array_intersect_key( $new, $old ) as $key => $field ) {
+			if ( $field !== $old[ $key ] ) {
+				$changed[] = (string) $key;
+			}
+		}
+
+		self::$collisions[ $id ] = array(
+			'entity_type' => $entity_type,
+			'group'       => $group_name,
+			'added'       => array_map( 'strval', array_keys( array_diff_key( $new, $old ) ) ),
+			'removed'     => array_map( 'strval', array_keys( array_diff_key( $old, $new ) ) ),
+			'changed'     => $changed,
+		);
+
+		$throttle = 'tmdo_group_collision_' . md5( (string) wp_json_encode( self::$collisions[ $id ] ) );
+		if ( class_exists( 'TMDO_Logger' ) && false === get_transient( $throttle ) ) {
+			set_transient( $throttle, 1, DAY_IN_SECONDS );
+			TMDO_Logger::warning( 'entity_group_collision', self::$collisions[ $id ] );
+		}
+	}
+
+	/**
+	 * 本請求偵測到的同名群組衝突（第二份定義已被捨棄）。
+	 *
+	 * @return array<int, array{entity_type:string, group:string, added:string[], removed:string[], changed:string[]}>
+	 */
+	public static function get_collisions(): array {
+		return array_values( self::$collisions );
+	}
+
 	// ─────────────────────────────────────────────────────────
 	// 查詢 API
 	// ─────────────────────────────────────────────────────────
@@ -167,11 +366,22 @@ final class TMDO_Entity_Registry {
 	/**
 	 * 依 meta_key 查詢欄位定義
 	 *
+	 * 傳入 $post_type 且 SCOPED_ROUTING_OPTION 開啟時：先找限定該 post_type 的群組，
+	 * 再找不限定的群組，都沒有則為 null。否則沿用舊語意（整個實體共用索引，
+	 * 共用 key 由最後註冊的群組擁有）。舊資料可能已依舊語意散落在別的群組表，
+	 * 所以既有站要等資料對齊後才開啟 option。
+	 *
+	 * @param string $post_type 選填：post 的 post_type。
 	 * @return array|null 欄位定義，或 null（非 UAE 管理欄位）
 	 */
-	public static function get_field( string $entity_type, string $meta_key ): ?array {
+	public static function get_field( string $entity_type, string $meta_key, string $post_type = '' ): ?array {
+		if ( '' === $post_type || '1' !== (string) get_option( self::SCOPED_ROUTING_OPTION, '0' ) ) {
 			return self::$field_index[ $entity_type ][ $meta_key ] ?? null;
 		}
+		return self::$scoped_index[ $entity_type ][ $post_type ][ $meta_key ]
+			?? self::$unscoped_index[ $entity_type ][ $meta_key ]
+			?? null;
+	}
 
 	/**
 	 * 取得實體類型下所有群組名稱
@@ -182,6 +392,24 @@ final class TMDO_Entity_Registry {
 		return array_keys( self::$groups[ $entity_type ] ?? array() );
 	}
 
+	/**
+	 * 群組宣告的複合索引。
+	 *
+	 * @return array<string, string[]> 索引名 → 欄位 key
+	 */
+	public static function get_group_indexes( string $entity_type, string $group_name ): array {
+		return self::$indexes[ $entity_type ][ $group_name ] ?? array();
+	}
+
+	/**
+	 * 群組限定的 post_type（未限定時為空陣列）。
+	 *
+	 * @return string[]
+	 */
+	public static function get_group_post_types( string $entity_type, string $group_name ): array {
+		return self::$scopes[ $entity_type ][ $group_name ] ?? array();
+	}
+
 	/**
 	 * 取得特定群組的完整欄位定義
 	 */

includes/engine/class-tmdo-hook-bus.php

@@ -10,6 +10,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 
@@ -78,7 +80,7 @@ final class TMDO_Hook_Bus {
 			return $check;
 		}
 
-		$field_def = TMDO_Entity_Registry::get_field( $type, $meta_key );
+		$field_def = self::field_for( $type, (int) $object_id, $meta_key );
 		if ( ! $field_def ) {
 			return $check; // 非管理欄位，放行
 		}
@@ -131,7 +133,7 @@ final class TMDO_Hook_Bus {
 			return $check;
 		}
 
-		$field_def = TMDO_Entity_Registry::get_field( $type, $meta_key );
+		$field_def = self::field_for( $type, (int) $object_id, $meta_key );
 		if ( ! $field_def ) {
 			return $check;
 		}
@@ -326,19 +328,25 @@ final class TMDO_Hook_Bus {
 
 		try {
 			// 單一 upsert，避免 SELECT→UPDATE/INSERT 的 read-modify-write race。
+			// post：新列一併帶入 post_status / post_date 副本（只在 insert 時寫入）。
+			$extra  = 'post' === $type ? TMDO_Post_Status_Sync::insert_columns( $entity_id, $group ) : array();
 			$result = TMDO_DB::upsert(
 				$table,
+				array_merge(
 					array(
 						$id_col => $entity_id,
 						$col    => $db_value,
 					),
+					$extra
+				),
 				array( $col ),
 				$id_col,
-				array( '%d', $format )
+				array_merge( array( '%d', $format ), array_fill( 0, count( $extra ), '%s' ) )
 			);
 
 			// 清除快取
 			TMDO_Cache_Orchestrator::invalidate( $type, $entity_id, $group );
+			self::touch_posts_last_changed( $type );
 
 			// 短路回傳 true（WP 認為寫入成功）
 			return $result !== false;
@@ -372,7 +380,7 @@ final class TMDO_Hook_Bus {
 			return $check;
 		}
 
-		$field_def = TMDO_Entity_Registry::get_field( $type, $meta_key );
+		$field_def = self::field_for( $type, (int) $object_id, $meta_key );
 		if ( ! $field_def ) {
 			return $check;
 		}
@@ -469,7 +477,7 @@ final class TMDO_Hook_Bus {
 			return $check;
 		}
 
-		$field_def = TMDO_Entity_Registry::get_field( $type, $meta_key );
+		$field_def = self::field_for( $type, (int) $object_id, $meta_key );
 		if ( ! $field_def ) {
 			return $check;
 		}
@@ -567,6 +575,8 @@ final class TMDO_Hook_Bus {
 			TMDO_Cache_Orchestrator::invalidate( $type, (int) $object_id, $group );
 		}
 
+		self::touch_posts_last_changed( $type );
+
 		do_action( 'wpdo_after_delete', $type, (int) $object_id, $meta_key, $meta_value, $result, (bool) $delete_all, $before_value );
 
 		// 若還要寫 EAV → return null 讓 WP 繼續刪除原生 meta
@@ -606,6 +616,20 @@ final class TMDO_Hook_Bus {
 	// 工具方法
 	// ─────────────────────────────────────────────────────────
 
+	/**
+	 * Flat post writes skip update_metadata()'s own hooks in aeav_only, so
+	 * move posts' last_changed here: caches keyed on it (WP query caches,
+	 * routed found-rows counts) must not outlive the write.
+	 *
+	 * @param string $type Entity type.
+	 * @return void
+	 */
+	private static function touch_posts_last_changed( string $type ): void {
+		if ( 'post' === $type ) {
+			wp_cache_set_posts_last_changed();
+		}
+	}
+
 	/**
 	 * 從當前 filter 名稱推斷實體類型
 	 * 例：update_user_metadata → user
@@ -620,6 +644,20 @@ final class TMDO_Hook_Bus {
 		return null;
 	}
 
+	/**
+	 * 欄位定義查詢；post meta 依該 post 本身的 post_type 解析（見 TMDO_Entity_Registry::get_field()）。
+	 *
+	 * 先做不帶 post_type 的查詢：大多數 key 不受管理，可省下 get_post_type()。
+	 * @return array<string, mixed>|null
+	 */
+	private static function field_for( string $type, int $object_id, string $meta_key ): ?array {
+		$field_def = TMDO_Entity_Registry::get_field( $type, $meta_key );
+		if ( null === $field_def || 'post' !== $type ) {
+			return $field_def;
+		}
+		return TMDO_Entity_Registry::get_field( $type, $meta_key, (string) get_post_type( $object_id ) );
+	}
+
 	/**
 	 * 直接讀取（繞過 WP filter 系統）
 	 * 供 wpdo_get_meta() 便利函式使用，性能更好
@@ -644,7 +682,7 @@ final class TMDO_Hook_Bus {
 			return $result;
 		}
 
-		$field_def = TMDO_Entity_Registry::get_field( $type, $key );
+		$field_def = self::field_for( $type, $entity_id, $key );
 		if ( ! $field_def ) {
 			return null;
 		}

includes/engine/class-tmdo-mode-manager.php

@@ -31,6 +31,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 
@@ -63,16 +65,15 @@ final class TMDO_Mode_Manager {
 	private static ?array $cache = null;
 
 	/**
-	 * 預設模式（v2.5.4 起）：
-	 *   post    → disabled（由 Legacy Feature_Flags FSM 管理，不由 Mode_Manager 控制）
-	 *   user / term / comment → dual_write（安全雙寫：寫入 flat table + 原生 EAV，讀取仍走 EAV）
+	 * 預設模式：全部 disabled，由管理者明確選擇後才啟用 entity bridge。
+	 * 已存在 wpdo_bridge_modes 的站台（包含 aeav_only）以儲存值為準，不受影響。
 	 */
 	private static function defaults(): array {
 		return array(
 			'post'    => self::MODE_DISABLED,
-			'user'    => self::MODE_DUAL_WRITE,
-			'term'    => self::MODE_DUAL_WRITE,
-			'comment' => self::MODE_DUAL_WRITE,
+			'user'    => self::MODE_DISABLED,
+			'term'    => self::MODE_DISABLED,
+			'comment' => self::MODE_DISABLED,
 		);
 	}
 

includes/engine/class-tmdo-post-status-sync.php

@@ -0,0 +1,236 @@
+<?php
+/**
+ * Copies of posts.post_status / post_date on post entity tables (O-1).
+ *
+ * With the copies (and their `(post_status, post_date)` index) a routed search
+ * can filter and sort inside the flat table instead of joining back to posts.
+ *
+ * Columns only reach a table two ways, never as DDL on a populated table in a
+ * web request:
+ *   - a brand-new (empty) group table gets them when it is created;
+ *   - `wp tmdo post-status-sync` adds them to existing tables and backfills.
+ *
+ * Per-group state lives in the TMDO_Post_Status_Sync::OPTION option:
+ * 'columns' (added, backfill pending) or 'ready' (every row copied).
+ * Afterwards transition_post_status keeps the copies current, and flat writes
+ * that create a row fill them in.
+ *
+ * @package TMDO
+ */
+
+if ( ! defined( 'ABSPATH' ) ) {
+	exit;
+}
+
+/**
+ * Keeps post_status / post_date copies on post entity tables.
+ */
+final class TMDO_Post_Status_Sync {
+
+	public const OPTION = 'tmdo_post_status_columns';
+
+	private const INDEX = 'idx_post_status_date';
+
+	/**
+	 * Hook the sync into WordPress.
+	 *
+	 * @return void
+	 */
+	public static function register(): void {
+		add_action( 'transition_post_status', array( __CLASS__, 'on_transition' ), 10, 3 );
+		add_action( 'wpdo_schema_updated', array( __CLASS__, 'on_schema_updated' ), 10, 3 );
+	}
+
+	/**
+	 * '' (no columns), 'columns' or 'ready'.
+	 *
+	 * @param string $group Post group name.
+	 * @return string
+	 */
+	public static function state( string $group ): string {
+		$states = get_option( self::OPTION, array() );
+		return is_array( $states ) ? (string) ( $states[ $group ] ?? '' ) : '';
+	}
+
+	/**
+	 * Every post status change or save: refresh the copies in each table that has them.
+	 *
+	 * @param string $new_status New status.
+	 * @param string $old_status Old status.
+	 * @param object $post       Saved post.
+	 * @return void
+	 */
+	public static function on_transition( $new_status, $old_status, $post ): void {
+		global $wpdb;
+		unset( $new_status, $old_status );
+		foreach ( self::groups_with_columns() as $group ) {
+			$table = TMDO_Schema_Manager::get_table_name( 'post', $group );
+			$wpdb->query(
+				$wpdb->prepare(
+					"UPDATE `{$table}` SET `post_status` = %s, `post_date` = %s WHERE `post_id` = %d", // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+					$post->post_status,
+					$post->post_date,
+					$post->ID
+				)
+			);
+		}
+	}
+
+	/**
+	 * A post group table was just created or altered: an empty one gets the
+	 * columns now; one holding rows waits for the CLI.
+	 *
+	 * @param string $entity_type Entity type.
+	 * @param string $group       Group name.
+	 * @param string $table       Table name.
+	 * @return void
+	 */
+	public static function on_schema_updated( $entity_type, $group, $table ): void {
+		global $wpdb;
+		if ( 'post' !== $entity_type || '' !== self::state( $group ) ) {
+			return;
+		}
+		if ( null !== $wpdb->get_var( "SELECT 1 FROM `{$table}` LIMIT 1" ) ) { // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+			return;
+		}
+		if ( self::add_columns( $group ) ) {
+			self::set_state( $group, 'ready' );
+		}
+	}
+
+	/**
+	 * Copies for a row a flat write is about to create (empty when the
+	 * group's table has no such columns).
+	 *
+	 * @param int    $post_id Post ID.
+	 * @param string $group   Group name.
+	 * @return array{post_status?:string, post_date?:string}
+	 */
+	public static function insert_columns( int $post_id, string $group ): array {
+		if ( '' === self::state( $group ) ) {
+			return array();
+		}
+		$post = get_post( $post_id );
+		if ( ! $post ) {
+			return array();
+		}
+		return array(
+			'post_status' => $post->post_status,
+			'post_date'   => $post->post_date,
+		);
+	}
+
+	/**
+	 * Add the columns to every post group table and copy posts' values in.
+	 *
+	 * @param bool $dry_run Count mismatching rows only.
+	 * @param int  $batch   Rows per UPDATE.
+	 * @return array<string, array{rows:int, mismatched:int}>
+	 */
+	public static function run( bool $dry_run = false, int $batch = 1000 ): array {
+		global $wpdb;
+		$batch  = max( 1, $batch );
+		$report = array();
+		foreach ( TMDO_Entity_Registry::get_groups_for_type( 'post' ) as $group ) {
+			$table = TMDO_Schema_Manager::get_table_name( 'post', $group );
+			if ( ! TMDO_Schema_Manager::table_exists( $table ) ) {
+				continue;
+			}
+			$rows             = (int) $wpdb->get_var( "SELECT COUNT(*) FROM `{$table}`" ); // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+			$report[ $group ] = array(
+				'rows'       => $rows,
+				'mismatched' => '' === self::state( $group ) ? $rows : self::mismatches( $group ),
+			);
+			if ( $dry_run || ! self::add_columns( $group ) ) {
+				continue;
+			}
+			$max = (int) $wpdb->get_var( "SELECT MAX(id) FROM `{$table}`" ); // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+			for ( $from = 0; $from < $max; $from += $batch ) {
+				$wpdb->query(
+					$wpdb->prepare(
+						"UPDATE `{$table}` t JOIN `{$wpdb->posts}` p ON p.ID = t.post_id SET t.post_status = p.post_status, t.post_date = p.post_date WHERE t.id > %d AND t.id <= %d", // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+						$from,
+						$from + $batch
+					)
+				);
+			}
+			self::set_state( $group, 'ready' );
+		}
+		return $report;
+	}
+
+	/**
+	 * Rows whose copies differ from posts (rows of deleted posts excluded).
+	 *
+	 * @param string $group Group name.
+	 * @return int
+	 */
+	public static function mismatches( string $group ): int {
+		global $wpdb;
+		$table = TMDO_Schema_Manager::get_table_name( 'post', $group );
+		return (int) $wpdb->get_var(
+			"SELECT COUNT(*) FROM `{$table}` t JOIN `{$wpdb->posts}` p ON p.ID = t.post_id WHERE NOT ( t.post_status <=> p.post_status ) OR NOT ( t.post_date <=> p.post_date )" // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+		);
+	}
+
+	/**
+	 * Add whichever of the two columns and the index the table lacks.
+	 *
+	 * @param string $group Group name.
+	 * @return bool False when the table is missing or the ALTER failed.
+	 */
+	private static function add_columns( string $group ): bool {
+		global $wpdb;
+		$table = TMDO_Schema_Manager::get_table_name( 'post', $group );
+		if ( ! TMDO_Schema_Manager::table_exists( $table ) ) {
+			return false;
+		}
+		$columns = (array) $wpdb->get_col( "SHOW COLUMNS FROM `{$table}`" ); // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+		$indexes = array_column( (array) $wpdb->get_results( "SHOW INDEX FROM `{$table}`", ARRAY_A ), 'Key_name' ); // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Registry table name.
+		$changes = array();
+		if ( ! in_array( 'post_status', $columns, true ) ) {
+			// Same collation as posts.post_status: the table default may differ,
+			// and comparing the two columns would then fail (illegal mix of collations).
+			$source    = $wpdb->get_row( "SHOW FULL COLUMNS FROM `{$wpdb->posts}` LIKE 'post_status'", ARRAY_A );
+			$collation = preg_replace( '/[^A-Za-z0-9_]/', '', (string) ( $source['Collation'] ?? '' ) );
+			$changes[] = 'ADD COLUMN `post_status` VARCHAR(20)' . ( '' !== $collation ? " COLLATE {$collation}" : '' ) . ' DEFAULT NULL';
+		}
+		if ( ! in_array( 'post_date', $columns, true ) ) {
+			$changes[] = 'ADD COLUMN `post_date` DATETIME DEFAULT NULL';
+		}
+		if ( ! in_array( self::INDEX, $indexes, true ) ) {
+			$changes[] = 'ADD INDEX `' . self::INDEX . '` (`post_status`, `post_date`)';
+		}
+		if ( $changes && false === $wpdb->query( "ALTER TABLE `{$table}` " . implode( ', ', $changes ) ) ) { // phpcs:ignore WordPress.DB.PreparedSQL.InterpolatedNotPrepared -- Fixed DDL on a registry table name.
+			return false;
+		}
+		if ( '' === self::state( $group ) ) {
+			self::set_state( $group, 'columns' );
+		}
+		return true;
+	}
+
+	/**
+	 * Post groups whose table has the columns.
+	 *
+	 * @return string[]
+	 */
+	private static function groups_with_columns(): array {
+		$states = get_option( self::OPTION, array() );
+		return is_array( $states ) ? array_keys( $states ) : array();
+	}
+
+	/**
+	 * Record a group's state.
+	 *
+	 * @param string $group Group name.
+	 * @param string $state 'columns' | 'ready'.
+	 * @return void
+	 */
+	private static function set_state( string $group, string $state ): void {
+		$states           = get_option( self::OPTION, array() );
+		$states           = is_array( $states ) ? $states : array();
+		$states[ $group ] = $state;
+		update_option( self::OPTION, $states, true );
+	}
+}

includes/engine/class-tmdo-query-compiler.php

@@ -10,6 +10,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-schema-manager.php

@@ -11,6 +11,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 
@@ -18,6 +20,9 @@ defined( 'ABSPATH' ) || exit;
 
 final class TMDO_Schema_Manager {
 
+	/** Option: "entity/group" → md5 of the composite index definition already applied. */
+	public const INDEXES_OPTION = 'tmdo_entity_indexes';
+
 	/** Request-scoped cache for table_exists() — prevents repeated SHOW TABLES per request. */
 	private static array $table_exists_cache = array();
 
@@ -58,6 +63,7 @@ final class TMDO_Schema_Manager {
 				$schema['group'],
 				$schema['fields']
 			);
+			self::ensure_group_indexes( $schema['type'], $schema['group'] );
 		}
 
 		TMDO_Entity_Registry::clear_pending_schemas();
@@ -162,6 +168,50 @@ final class TMDO_Schema_Manager {
 		return true;
 	}
 
+	/**
+	 * Add the group's declared composite indexes that its table lacks.
+	 *
+	 * Indexes are not part of the schema hash, so an existing table (which
+	 * may already hold aeav_only data) gets them in place — no rebuild. The
+	 * applied definition is remembered per group (one autoloaded option), so
+	 * requests only run SHOW INDEX / ALTER when the declaration changes.
+	 *
+	 * @param string $entity_type Entity type.
+	 * @param string $group_name  Group name.
+	 * @return void
+	 */
+	public static function ensure_group_indexes( string $entity_type, string $group_name ): void {
+		global $wpdb;
+		$declared = TMDO_Entity_Registry::get_group_indexes( $entity_type, $group_name );
+		if ( empty( $declared ) ) {
+			return;
+		}
+		$id        = "{$entity_type}/{$group_name}";
+		$signature = md5( (string) wp_json_encode( $declared ) );
+		$applied   = get_option( self::INDEXES_OPTION, array() );
+		$applied   = is_array( $applied ) ? $applied : array();
+		if ( ( $applied[ $id ] ?? '' ) === $signature ) {
+			return;
+		}
+		$table = self::get_table_name( $entity_type, $group_name );
+		if ( ! self::table_exists( $table ) ) {
+			return;
+		}
+
+		$existing = array_unique( array_column( (array) $wpdb->get_results( "SHOW INDEX FROM `{$table}`", ARRAY_A ), 'Key_name' ) );
+		foreach ( $declared as $name => $keys ) {
+			$index = 'cidx_' . self::sanitize_column_name( $name );
+			if ( in_array( $index, $existing, true ) ) {
+				continue;
+			}
+			$columns = implode( ', ', array_map( static fn( $key ) => '`' . self::sanitize_column_name( $key ) . '`', $keys ) );
+			$wpdb->query( "ALTER TABLE `{$table}` ADD INDEX `{$index}` ({$columns})" );
+		}
+
+		$applied[ $id ] = $signature;
+		update_option( self::INDEXES_OPTION, $applied, true );
+	}
+
 	/**
 	 * 計算 Schema Hash（用於偵測欄位變動）
 	 */
@@ -266,6 +316,113 @@ final class TMDO_Schema_Manager {
 		);
 	}
 
+	/**
+	 * 還原孤兒群組：扁平表還在、定義存在 wpdo_registry_meta，但已沒有外掛註冊。
+	 *
+	 * 在所有註冊都完成後（init:1 晚綁定）呼叫。只處理 aeav_only 的實體：其他
+	 * 模式仍會寫原生 meta，孤兒 key 從原生讀取即正確；全部非 aeav_only 時不查資料庫。
+	 * 原生 meta 已有資料的 key（孤兒期間寫入，比扁平表新）留在原生，不還原。
+	 * 還原只影響讀寫路由，不會建立或修改任何資料表。
+	 *
+	 * @return int 還原的群組數
+	 */
+	public static function restore_orphaned_groups(): int {
+		global $wpdb;
+
+		if ( ! class_exists( 'TMDO_Mode_Manager' ) ) {
+			return 0;
+		}
+		$types = array_values(
+			array_filter(
+				TMDO_Entity_Registry::VALID_ENTITY_TYPES,
+				static fn( $type ) => TMDO_Mode_Manager::MODE_AEAV_ONLY === TMDO_Mode_Manager::get( $type )
+			)
+		);
+		if ( empty( $types ) ) {
+			return 0;
+		}
+
+		$meta_table   = $wpdb->prefix . TMDO_TABLE_PREFIX . 'registry_meta';
+		$placeholders = implode( ',', array_fill( 0, count( $types ), '%s' ) );
+		$rows         = $wpdb->get_results(
+			$wpdb->prepare( "SELECT entity_type, group_name, field_definitions FROM `{$meta_table}` WHERE entity_type IN ({$placeholders})", ...$types ),
+			ARRAY_A
+		);
+
+		$orphans = array();
+		foreach ( (array) $rows as $row ) {
+			if ( ! TMDO_Entity_Registry::get_group_fields( $row['entity_type'], $row['group_name'] ) ) {
+				$orphans[] = $row;
+			}
+		}
+		if ( empty( $orphans ) ) {
+			return 0;
+		}
+
+		// One SHOW TABLES for all candidates instead of one per orphan.
+		$existing = (array) $wpdb->get_col( $wpdb->prepare( 'SHOW TABLES LIKE %s', $wpdb->esc_like( $wpdb->prefix . TMDO_TABLE_PREFIX ) . '%' ) );
+
+		// "entity:key" → native meta has rows. Stable while the key is restored
+		// (aeav_only writes go to the flat table only), so a day-long cache is safe.
+		$native_cache = get_transient( 'tmdo_orphan_native_keys' );
+		$native_cache = is_array( $native_cache ) ? $native_cache : array();
+		$cache_dirty  = false;
+
+		$restored = 0;
+		foreach ( $orphans as $row ) {
+			if ( ! in_array( self::get_table_name( $row['entity_type'], $row['group_name'] ), $existing, true ) ) {
+				continue;
+			}
+			$fields = json_decode( (string) $row['field_definitions'], true );
+			if ( ! is_array( $fields ) ) {
+				continue;
+			}
+			$native_keys = array();
+			foreach ( $fields as $field ) {
+				$key = (string) ( $field['key'] ?? '' );
+				if ( '' === $key ) {
+					continue;
+				}
+				$cache_key = $row['entity_type'] . ':' . $key;
+				if ( ! array_key_exists( $cache_key, $native_cache ) ) {
+					$native_cache[ $cache_key ] = self::native_meta_has_key( $row['entity_type'], $key );
+					$cache_dirty                = true;
+				}
+				if ( $native_cache[ $cache_key ] ) {
+					$native_keys[] = $key;
+				}
+			}
+			if ( TMDO_Entity_Registry::restore_group( $row['entity_type'], $row['group_name'], $fields, $native_keys ) ) {
+				++$restored;
+			}
+		}
+
+		if ( $cache_dirty ) {
+			set_transient( 'tmdo_orphan_native_keys', $native_cache, DAY_IN_SECONDS );
+		}
+
+		return $restored;
+	}
+
+	/**
+	 * Whether the entity's native meta table holds any row for this key.
+	 */
+	private static function native_meta_has_key( string $entity_type, string $meta_key ): bool {
+		global $wpdb;
+		$tables = array(
+			'post'    => $wpdb->postmeta,
+			'user'    => $wpdb->usermeta,
+			'term'    => $wpdb->termmeta,
+			'comment' => $wpdb->commentmeta,
+		);
+		if ( empty( $tables[ $entity_type ] ) ) {
+			return false;
+		}
+		return (bool) $wpdb->get_var(
+			$wpdb->prepare( "SELECT 1 FROM `{$tables[ $entity_type ]}` WHERE meta_key = %s LIMIT 1", $meta_key )
+		);
+	}
+
 	/**
 	 * 取得已儲存的 Schema hash
 	 */

includes/engine/class-tmdo-shadow-diff-logger.php

@@ -16,6 +16,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/engine/class-tmdo-type-caster.php

@@ -11,6 +11,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 // phpcs:disable Squiz.Commenting,Generic.Commenting,WordPress.DB.PreparedSQL.NotPrepared,WordPress.DB.PreparedSQL.InterpolatedNotPrepared,WordPress.DB.PreparedSQLPlaceholders.ReplacementsWrongNumber,Generic.CodeAnalysis.UnusedFunctionParameter,Generic.CodeAnalysis.EmptyStatement,Squiz.PHP.DisallowMultipleAssignments,Squiz.PHP.DisallowSizeFunctionsInLoops,WordPress.WP.I18n.MissingTranslatorsComment,WordPress.PHP.NoSilencedErrors,WordPress.WP.AlternativeFunctions.file_get_contents_file_get_contents,Squiz.PHP.CommentedOutCode,Universal.NamingConventions.NoReservedKeywordParameterNames,WordPress.PHP.YodaConditions,Squiz.Commenting.InlineComment.InvalidEndChar -- PR-1 ported from UAE; cleanup PR scheduled.
 
 

includes/export/class-tmdo-csv-writer.php

@@ -9,6 +9,8 @@
  * @package WP_Data_Optimizer
  */
 
+declare(strict_types=1);
+
 if ( ! defined( 'ABSPATH' ) ) {
 	exit;
 }